A novel technique in analyzing non-linear wave-wave interaction

During wave growth non-linear wave–wave interactions cause transfer of some wave energy from lower to higher wave periods as the spectrum grows. Wavelet bicoherence, which is a new technique in the analysis of wind–wave and wave–wave interactions, is used to analyze non-linear wave–wave interactions. A selected record of wind wave that contains the maximum wave height observed during 6 h of wave generation is divided into five segments and wavelet bicoherence is computed for the whole record, and for all divided segments. The study shows that the non-linear wave–wave interaction occurs at different bicoherence levels and these levels are different from one segment to another due to the non-stationarity feature of the examined data set.     

Filters for linear sea-wave prediction

Deterministic sea-wave prediction (DSWP) models are appearing in the literature designed for quiescent interval prediction in marine applications dominated by large swell seas. The approach has focused upon spectral methods which are straightforward and intuitively attractive. However, such methods have the disadvantage that while the sea is aperiodic in nature, the standard discrete spectral processing techniques force an absolutely periodic structure onto the resulting sea surface prediction models. As it is the shape of the sea surface that is important in such applications, particularly near the end of the domain which is important, the standard windowing techniques used in signal processing work to reduce leakage artifacts cannot be employed. This has necessitated the use of end matching methods that can be both inconvenient and may reduce the fraction of the time for which legitimate predictions are available. As a result, an investigation has been undertaken of the use of finite impulse response prediction filters to provide the necessary dispersive phase shifting required in DSWP systems. The present work examines the theoretical basis for such filters and explores their properties together with their application to both long and short crested swell seas. It is shown that wide band forms of such filters are only convergent in the sense of distributions having both infinite duration impulse responses and asymptotically divergent first derivatives. However, appropriate band limitation can produce useful finite impulse responses allowing implementation via standard discrete convolution methods. It is demonstrated that despite the prediction filters having a non-causal impulse response such filters can be used in practice due to a combination of the asymmetric nature of the impulse response and the fundamental nature of the prediction process. The findings are confirmed against actual sea-wave data.     

Variability in oceanographic and ecological processes in the Canadian Arctic Archipelago

This paper brings together unpublished historical data sets and published literature to review the role of climatic, oceanographic and ecological processes in the marine ecosystem of the eastern Canadian Archipelago. Physical data include characteristics of the water masses, circulation patterns, sea ice conditions, and climatic records from 1950s onward. Biological data include unpublished data sets on nutrients, primary and secondary production, and sedimentation, which were collected during the 1980–1990s in the eastern Canadian Archipelago. These results show high year-to-year variability in nutrient inventories and ratios, the magnitude of the ice algae and phytoplankton bloom, the timing of ice algae sedimentation in the spring, and the composition of the zooplankton community. The significance of this high interannual variability and its effect on pelagic–benthic coupling processes is discussed in the context of climatic and oceanographic forcing, with emphasis on recent (past decade) Arctic changes. An estimate of total primary production in the Archipelago is also presented, along with published production estimates for other Arctic shelves, showing that the Archipelago may support up to 32% of the total primary production of Arctic shelves. The high year-to-year variability in production and carbon transfer pathways (e.g. pelagic versus benthic) in the Archipelago suggest that the system might be resilient to the increased variability in climatic conditions occurring in the past decade. However, this increased variability combined with directional change in climatic and oceanographic conditions might also modify the existing balance of ecological processes. For example, shifts in the timing of events appear to have already occurred in the past decade, with potential cascading effects throughout the ecosystem.     

Abundance of the introduced seastar, Asterias amurensis, and spatial variability in soft sediment assemblages in SE Tasmania: Clear correlations but complex interpretation

The northern Pacific seastar, Asterias amurensis, was first collected in southeast Tasmania in 1986. Mistaken for the endemic asteroid Uniophora granifera, its true identity was not realised until 1992. It is now a conspicuous predator in soft sediment habitats in this region, and is considered a major threat to native assemblages and commercial species. We examined the structure of soft sediment assemblages at different spatial scales in southeast Tasmania, and correlated spatial variation in community composition with seastar abundances. We found that the structure of soft sediment assemblages is highly variable at a range of spatial scales from metres to tens of kilometres. Clear differences in the composition of assemblages and abundances of major taxa were detected between areas with and without seastars and between areas with low and high seastar densities. However, the nature of these patterns suggests that they are more likely due to differences in sediment characteristics than due to impacts of the seastar. Thus, spatial differences in soft sediment assemblages might have been erroneously attributed to seastars without detailed information on important physical factors such as sediment characteristics. A second survey, using larger sampling units (1 m²) but across a more limited spatial extent, targeted bivalves and heart urchins that were identified as important prey of the seastar in observations of feeding and in experimental studies. Large-scale patterns of abundance and size structure were consistent with seastar effects anticipated from small-scale experimental and feeding studies for some, but not all, species. While the field survey ultimately provided evidence about the presence or absence of seastar impacts at large-scales, the identification of key ecological variables in experimental and feeding studies proved crucial to both the design and interpretation of patterns observed in the large-scale surveys. Overall, this work highlighted the necessity to consider multiple lines of evidence rather than relying on a single ‘inferential’ test, in the absence of pre-impact data.     

Cross-Calibration and Long-Term Monitoring of the Microwave Radiometers of ERS, TOPEX, GFO, Jason, and Envisat

The radiometers on board the satellites ERS-1, TOPEX/Poseidon, ERS-2, GFO, Jason-1, and Envisat measure brightness temperatures at two or three different frequencies to determine the total columnal water vapor content and wet tropospheric path delay, a major correction to the altimeter range measurements. In order to asses the long-term stability of the path delay, the radiometers are calibrated against vicarious cold and hot references, against each other, and against several atmospheric models. Four of these radiometers exhibit significant drifts in at least one of the channels, resulting in yet unmodeled errors in path delay of up to 1 mm/year, thus limiting the accuracy at which global sea level rise can be inferred from the altimeter range measurements.     

A Sensitivity Analysis of the Waterline Method of Constructing a Digital Elevation Model for Intertidal Areas in ERS SAR scene of Eastern England

A sensitivity analysis of the waterline method of constructing a Digital Elevation Model (DEM) of an intertidal zone using remote sensing and hydrodynamic modelling is described. Variation in vertical height accuracy as a function of beach slope is investigated using a set of nine ERS Synthetic Aperture Radar (SAR) images of the Humber/Wash area on the English east coast acquired between 1992 and 1994. Waterlines from these images are heighted using a hydrodynamic tide-surge model and interpolated using block kriging. On 1:500 slope beaches, an average block height estimation standard deviation of 18–22 cm is achieved. This rises to 27 cm on 1:100 slope beaches, and 32 cm on 1:30 slope beaches. The average heighting error at different slopes is decomposed into components due to waterline heighting error, inadequate sensor resolution and interpolation inaccuracy. It is shown that, at 1:500 slope, waterline heighting error and interpolation inaccuracy are the main error sources, whilst at 1:30 slope, errors due to inadequate sensor resolution become dominant. The ability of the technique to generate intertidal DEMs for almost the entire coastal zone in a complete ERS SAR scene covering 100×100 km is demonstrated.     

Ultimate strength of ship hulls under torsion

For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength characteristics of ships with large hatch openings. The primary aim of the present study is to investigate the ultimate strength characteristics of ship hulls with large hatch openings under torsion. Axial (warping) as well as shear stresses are normally developed for thin-walled beams with open cross sections subjected to torsion. A procedure for calculating these stresses is briefly described. As an illustrative example, the distribution and magnitude of warping and shear stresses for a typical container vessel hull cross section under unit torsion is calculated by the procedure. By theoretical and numerical analyses, it is shown that the influence of torsion induced warping stresses on the ultimate hull girder bending strength is small for ductile hull materials while torsion induced shear stresses will of course reduce the ship hull ultimate bending moment.     

The Mid-atlantic Ridge (31°S–34°30′S): Temporal and spatial variations of accretionary processes

The ridge located between 31° S and 34°30′S is spreading at a rate of 35 mm yr⁻¹, a transitional velocity between the very slow (≤20 mm yr⁻¹) opening rates of the North Atlantic and Southwest Indian Oceans, and the intermediate rates (60 mm yr⁻¹) of the northern limb of the East Pacific Rise, and the Galapagos and Juan de Fuca Ridges. A synthesis of multi-narrow beam, magnetics and gravity data document that in this area the ridge represents a dynamically evolving system. Here the ridge is partitioned into an ensemble of six distinct segments of variable lengths (12 to 100 km) by two transform faults (first-order discontinuities) and three small offset (< 30 km) discontinuities (second-order discontinuities) that behave non-rigidly creating complex and heterogeneous morphotectonic patterns that are not parallel to flow lines. The offset magnitudes of both the first and second-order discontinuities change in response to differential asymmetric spreading. In addition, along the fossil trace of second-order discontinuities, the lengths of abyssal hills located to either side of a discordant zone are observed to lengthen and shorten creating a saw-toothed pattern. Although the spreading rate remains the same along the length of the ridge studied, the morphology of the spreading segments varies from a deep median valley with characteristics analogous to the rift segments of the North Atlantic to a gently rifted axial bulge that is indistinguishable from the shape and relief of the intermediate rate spreading centers of the East Pacific Rise (i.e., 21°N). Like other carefully surveyed ridge segments at slow and fast rates of accretion, the along-axis profiles of each ridge segment are distinctly convex upwards, and exhibit along-strike changes in relief of 500m to 1500 between the shallowest portion of the segment (approximate center) and the segment ends. Such spatial variations create marked along-axis changes in the morphology and relief of each segment. A relatively low mantle Bouguer anomaly is known to be associated with the ridge segment characterized by a gently rifted axial bulge and is interpreted to indicate the presence of focused mantle upwelling (Kuo and Forsyth, 1988). Moreover, the terrain at the ends of each segment are known to be highly magnetized compared to the centers of each segment (Carbotte et al, 1990). Taken together, these data clearly establish that these profound spatial variations in ridge segment properties between adjoining segments, and along and across each segment, indicate that the upper mantle processes responsible for the formation of this contrasting architecture are not solely related to passive upwelling of the asthenosphere beneath the ridge axis. Rather, there must be differences in the thermal and mechanical structure of the crust and upper mantle between and along the ridge segments to explain these spatial variations in axial topography, crustal structure and magnetization. These results are consistent with the results of investigations from other parts of the ridge and suggest that the emplacement of magma is highly focused along segments and positioned beneath the depth minimum of a given segment. The profound differences between segments indicate that the processes governing the behavior of upwelling mantle are decoupled and the variations in the patterns of axis flanking morphology and rate of accretion indicate that processes controlling upwelling and melt production vary markedly in time as well. At this spreading rate and in this area, the accretionary processes are clearly three-dimensional. In addition, the morphology of a ridge segment is not governed so much by opening rate as by the thermal structure of the mantle which underlies the segment.