青岛文昌鱼的生活史──年龄、生长和死亡研究

于１９８９年８月－１９９０年７月对青岛文昌鱼的生活史进行研究。结果表明：（１）青岛文昌鱼种群由４个齿组组成，它至少生产４ａ以上，甚至可达６ａ左右。（２）在Ⅰ、Ⅱ齿时生长较快，平均年生长１３－１５ｍｍ，Ⅲ龄后生长速度减慢，即使同一年龄组的文晶鱼，在不同季节其生长速度也不同。（３）在冬春采集的文昌鱼中Ⅲ龄组的峰值较小。（４）繁殖季节过后，老龄文昌鱼因衰老而死亡。     

UNB多波束数据格式解析

采用VB进行程序设计,实现了对数据文件的解析,提取出了各种不同类型的数据,介绍了数据的处理与应用.     

海拉尔盆地乌尔逊凹陷与松辽盆地孤店CO2气田含片钠铝石砂岩的岩石学特征

海拉尔盆地乌尔逊凹陷南屯组与松辽盆地孤店CO₂气田泉头组发育大量含片钠铝石砂岩。通过偏光显微镜、扫描电镜、茜素红-S染色、X射线衍射、电子探针与INCA能谱分析等,对含片钠铝石砂岩的骨架碎屑组分、胶结物与自生矿物、成岩共生序列等岩石学特征进行了系统研究。研究表明,含片钠铝石砂岩的岩石类型为长石砂岩和岩屑长石砂岩,粒度以细粒、细-中粒为主,分选差-中等。砂岩中胶结物主要为次生加大石英、自生石英、片钠铝石、铁白云石和粘土矿物。其中,片钠铝石最高可达砂岩总体积的22％在砂岩中或以放射状、束状、菊花状、杂乱毛发状、毛球状、板状等集合体充填孔隙,或呈束状和板状交代长石和岩屑。电子探针与INCA能谱综合分析表明,片钠铝石主要由Na、Al、O、C等组成。在含片钠铝石砂岩中,成岩共生序列依次为粘土矿物包壳-次生加大石英、自生石英、自生高岭石-油气充注-CO₂充注-片钠铝石-铁白云石。其中,CO₂注入前形成的自生矿物组合主要为次生加大石英、自生石英和自生高岭石,CO₂注入后形成的自生矿物组合主要为片钠铝石和铁白云石。     

鲁23井“动水位”观测的分析

本文介绍了鲁23井“动水位”观测情况。提出了一个分析有泄流的“动水位”的新方法,即把流量换算成水位,以等效静水位来表示“动水位”与流量。由于把“动水位”与流量用一个量来计算,从而为“动水位”观测定量的、统一的分析研究提供了新的方法。这对提高“动水位”井的监测预报地震能力起一定的作用。 本文还以鲁23井“动水位”观测资料为例,利用新方法进行处理的观测分析结果与理论研究结果是一致的。     

新疆准噶尔地区富硫型与贫硫型浅成低温热液金矿床成矿流体与碳、硫、铅同位素

对新疆准噶尔地区浅成低温热液型金矿床中富硫型的阔尔真阔腊金矿、贫硫型的石英滩金矿进行了流依包裹体的均一温度、爆裂温度、包裹体气液相成分、H、O 同位素、矿体围岩及脉石英包裹体 C 同位素、矿体中黄铁矿等 S、Ph 同位素等系统地进行了研究,综合研究表明,本区该类型金矿成矿流体一般温度低、盐度低,来源主要为循环的大气水、矿石中黄铁矿的 S、Pb 同位素均为深源,暗示金的深部来源:矿体石英包裹体中 CO_2的δ~(13)C 为低于-10‰的有机碳,反映了本区年轻的富含有机质的沉积地层参与了金的成矿。此外,本文首次提出了富硫型阔尔真阔腊金矿床成矿流体中有侵入岩浆热液参与,深部有多金属成矿远景;贫硫型石英滩金矿没有侵入岩浆热液的参与,成矿仅与火山古热液活动有关,其成矿较单一。此外,阔尔真阔腊金矿中低温流体活动较强,金矿化也较强:石英滩金矿低温流体活动相对较弱,金矿化也较弱,也体现了该类型金矿床低温流体活动的越强烈,金矿化越强的规律。     

黄河下游壶穴的研究

黄河下游(泺口以下)发育了大量的壶穴(Pothole),按成因可以分为6种:流水侵蚀、风蚀、圆砾铸模、冰压刻、冰融水滴蚀及泄气侵蚀。流水侵蚀形成的圆形Pothole规模不一,小者直径在十余厘米,深数厘米,大者直径达数米,深1 m余;风蚀形成的圆形Pothole规模一般比较小,直径多在二、三十厘米以下,深10 cm以下,大部分穴壁缓斜,状如盘碟;圆砾铸模形成的Pothole规模一般较小,直径多在一、二十厘米以下、穴壁陡倾,状如锅穴;冰融水滴蚀形成的Pothole形态复杂,规模不一,既有穴壁缓斜的盘碟状者,也有穴壁陡倾近乎直立的近圆柱状者,直径从不足1cm到三、四十厘米,其穴缘、穴壁和穴底常有次级构造;泄气侵蚀形成的Pothole更是十分复杂,平面形态可以圆形到近圆形甚至其他复杂形态,穴壁可以非常平缓,也可以陡倾,直径从数厘米到数十厘米,深数毫米到二、三十厘米,穴缘和穴壁也常有次级伴生构造,既可单独产出,也可成群产出,同时还可以多个密集产出,状如蜂巢,这一类Pothole的成因极为独特,主要与黄河断流河床捕获的空气泄漏有关。     

基于栅格空间信息定量化的湖南西部地区生态环境综合评价

以湖南西部地区为研究区域,采用遥感影像作为主要数据源,针对区域主要生态问题,利用栅格数据结构为主的数字环境模型,建立了生态环境质量综合评价模型. 对区域生态环境质量的空间分异格局进行了研究,通过将评价结果与数字高程模型迭加分析,研究了生态环境质量的垂直地带性分布规律,探索适合以山高坡陡为主要地貌特征的山区生态评价方法,结果显示,湖南西部地区生态环境综合指数呈正态分布,大部分地区环境质量属一般. 总体环境状况东南部好于西北部,河谷盆地优于山地. 研究表明,利用遥感和地理信息系统技术进行区域生态环境评价,具有数据采集快速、客观,评价和制图自动化,评价结果空间定位精度高,直观性与实用性强等优点.     

The BLAST-CODE model - A Computer-Aided Bench Blast Design and Simulation System

Blast design is a critical factor dominating fragmentation and cost of actual bench blasts. However, due to the varying nature of rock properties and geology as well as free surface conditions, reliable theoretic formulae are still unavailable at present and in most cases blast design is carried out by personal experience. As an effort to find a more scientific and reliable tool for blast design, a computer-aided bench blast design and simulation system, the BLAST-CODE model, is developed for Shuichang surface mine, Mining Industry Company of the Capital Iron and Steel Corporation Beijing. The BLAST-CODE model consists of a database representing geological and topographical conditions of the mine and the modules Frag + and Disp + for blast design and prediction of resultant fragmentation and displacement of rock mass. The two modules are established in accordance with cratering theory qualitatively and modified quantitatively by regression of the data collected from 85 bench blasting practices conducted in 3 mines of the Shuichang surface mine. Blasting parameters are selected based upon quantitative and comprehensive evaluation on the effect of the factors such as rock properties, geology, free surface conditions and detonation characteristics of the explosive products in use. In order to ensure practicality and reliability of the system, the BLAST-CODE model allows automatic adjustment to the selected parameters such as burden B and spacing S as well as explosive charge amount Q of any blasthole under irregular topographic and/or varying blastability conditions of the rock mass to be blasted. Simulation of the BLAST-CODE model includes prediction of fragmentation and displacement that are demonstrated in terms of swell factor, characteristic rock size x c and size distribution coefficient n by Rossin-Ramler's equation, and 3-dimentional muck pile profile. The BLAST-CODE model also permits interactive parameter selection based on comparison of the predicted fragmentation and displacement as well as the cost for drilling, explosives, and accessories until the most effective option can be selected.     

Dynamic processes of a simple linear dune—a study in the Taklimakan Sand Sea, China

Samples of dune sands, surveys of the morphology and field measurements of wind velocity and direction of a simple linear dune in Taklimakan Sand Sea show that the airflow and sand flux vary with the change of wind direction on the dune surface. Decrease of the airflow stress on the lee flank does not result in much decrease of the sand flux because of the low threshold shear velocities and the airflow conditions. There are no significant relations between the sand flux on the lee flank and the angle of incidence of the airflow. The low threshold shear velocities and the maintenance of the sand flux at the lee flank are the main mechanisms keeping the linear shape of the dunes. Measurements of the sand flux shows that it reaches a maximum on the crest of the dune. The grain size of the transported sands has some differences compared to that of the dune surface. The sands transported are finer than that on the dune surface, but better sorted under the influence of the medium to low wind activity. The field experiment results exhibit that it is possible for the dunes to be shaped as linear dunes during the processes of accumulation and elongation.