贵州石阡-花桥断裂构造特征及其对地热资源的控制作用

石阡地区具有丰富的地热资源,在石阡-花桥断裂带及其次级构造中形成了一系列的温泉群。断裂构造对地热资源具有严格的控制作用。本文通过对石阡-花桥断裂带显微构造、运动学等构造地质特征和该地区地热特征,系统分析石阡-花桥断裂带构造特征及其对地热资源的控制作用。研究认为,石阡地区地热资源的主要热源为地温梯度增温,地热资源的分布严格受控于石阡-花桥断裂。石阡断裂为逆冲兼左行平移断层,为地热水的传导和储集提供了有利空间。花桥断裂带发育拉张裂隙、扭裂隙及分枝状断层,圈闭了含水岩系,在拉裂破碎带上形成热储。温泉大多沿主要控热、导热断裂出露,平面上呈线状分布于石阡和花桥断裂上盘及花桥断裂的断夹块中。     

Seasonal variability of oxygen and hydrogen isotopes in a wetland system of the Yunnan-Guizhou Plateau,southwest China: a quantitative assessment of groundwater inflow fluxes

The Caohai Wetland serves as an important ecosystem on the Yunnan–Guizhou Plateau and as a nationally important nature reserve for migratory birds in China. In this study, surface water, groundwater and wetland water were collected for the measurement of environmental isotopes to reveal the seasonal variability of oxygen and hydrogen isotopes (δ¹⁸O, δD), sources of water, and groundwater inflow fluxes. Results showed that surface water and groundwater are of meteoric origin. The isotopes in samples of wetland water were well mixed vertically in seasons of both high-flow (September) and low-flow (April); however, marked seasonal and spatial variations were observed. During the high-flow season, the isotopic composition in surface wetland water varied from ?97.13 to ?41.73‰ for δD and from ?13.17 to ?4.70‰ for δ¹⁸O. The composition of stable isotopes in the eastern region of this wetland was lower than in the western region. These may have been influenced by uneven evaporation caused by the distribution of aquatic vegetation. During the low-flow season, δD and δ¹⁸O in the more open water with dead aquatic vegetation ranged from ?37.11 to ?11.77‰, and from ?4.25 to ?0.08‰, respectively. This may result from high evaporation rates in this season with the lowest atmospheric humidity. Groundwater fluxes were calculated by mass transfer and isotope mass balance approaches, suggesting that the water sources of the Caohai Wetland were mainly from groundwater in the high-flow season, while the groundwater has a smaller contribution to wetland water during the low-flow season.     

Acquiring high-resolution topography and performing spatial analysis of loess landslides by using low-cost UAVs

The Loess Plateau is a region in China prone to frequent geological disasters, where thousands of loess landslides can be found. Conventional field survey methods are inadequate for the requirements of fine spatial analysis of landslides. Due to its numerous advantages (fast, efficient, low cost, safe, and able to acquire high-resolution data), structure from motion (SfM) technique to photogrammetric orientation of flights and modeling applied to photographs taken by unmanned aerial vehicles (UAVs) equipped with a camera has become a powerful new tool for the generation of high-resolution topography that has emerged in recent years, which has become a powerful new technique for acquiring high-resolution topographic data. In this study, we conducted nearly two months of field UAV surveys of loess landslides on the Loess Plateau, eventually established 3D digital models for 11 loess landslides, and produced high-resolution digital orthophoto maps (DOMs) and digital elevation models (DEMs). High-resolution spatial analysis of the loess landslides (mainly including characteristic parameter extraction, topography profile analysis, surface feature analysis, and hydrologic analysis) was performed using Agisoft PhotoScan, ArcGIS 10.2, Global Mapper 17, and Origin Pro 9.0. The UAV technique allows us to further understand the micro-level internal spatial and structural characteristics of loess landslides. Moreover, not only does it allow us to accurately measure the characteristic geometric parameters but also enables us to detect the surface details of loess landslides (e.g., textures, fissures, and micro-landforms). Manifestly, we can also deduce the original structural characteristics and possible inducement mechanism of landslides based on a combination of high-resolution data acquired by UAVs, proper ground surveys, and theoretical knowledge. In summary, the low-cost UAVs are highly and especially suitable for surveys and digital terrain analysis of landslides on the Loess Plateau with sparse vegetation.     

Numerical analysis of effect of baffle configuration on impact force exerted from rock avalanches

In mountainous areas, channelized rock avalanches swarm downslope leading to large impact forces on building structures in residential areas. Arrays of rock avalanche baffles are usually installed in front of rigid barriers to attenuate the flow energy of rock avalanches. However, previous studies have not sufficiently addressed the mechanisms of interaction between the rock avalanches and baffles. In addition, empirical design approaches such as debris flow (Tang et al., Quat Int 250:63–73, 2012), rockfall (Spang and Rautenstrauch, 1237–1243, 1988), snow avalanches (Favier et al., 14:3–15, 2012), and rock avalanches (Manzella and Labiouse, Landslides 10:23–36, 2013), which are applied in natural geo-disasters mitigation cannot met construction requirements. This study presents details of numerical modeling using the discrete element method (DEM) to investigate the effect of the configuration of baffles (number and spacing of baffle columns and rows) on the impact force that rock avalanches exert on baffles. The numerical modeling is firstly conducted to provide insights into the flow interaction between rock avalanches and an array of baffles. Then, a modeling analysis is made to investigate the change pattern of the impact force with respect to baffle configurations. The results demonstrate that three crucial influencing factors (baffle row numbers, baffle column spacing, and baffle row spacing) have close relationship with energy dissipation of baffles. Interestingly, it is found that capacity of energy dissipation of baffles increases with increasing baffle row numbers and baffle row spacing, while it decreases with increasing baffle column spacing. The results obtained from this study are useful for facilitating design of baffles against rock avalanches.     

Residual-state creep of clastic soil in a reactivated slow-moving landslide in the Three Gorges Reservoir Region,China

We study the creep properties of clastic soil in residual state. The intact samples are taken from a reactivated slow-moving landslide in the Three Gorges Reservoir Region, China. Firstly, the patterns of the landslide movement are analysed based on recent monitoring data, which indicate that the soil within the shear zone is undergoing two deformation processes: a creep phase, characterised by different creep rates, and a dormant phase. We then study the creep behaviour of the soil samples through a series of ring shear creep tests under various shear stress conditions. The creep response depends strongly on the ratio of the shear stress to the residual strength, and the normal effective stress, whereas the creep rate decreases due to strength regain. The long-term strength of the clastic soil is close to the residual strength. Therefore, the residual strength obtained from conventional shear test, which is less time consuming than creep test, can be used in long-term stability analyses of creeping landslides.     

Photodegradation of dimethyl phthalate (DMP) by UV–TiO<Subscript>2</Subscript> in aqueous solution: operational parameters and kinetic analysis

In this paper, the adsorption and degradation phenomenon involved in the photocatalytic degradation of dimethyl phthalates (DMPs) by titanium dioxide (TiO₂) was studied. A variety of operating variables were selected firstly. Then, it was proved that even for such weak adsorption properties molecules as DMP, adsorption was still an important prerequisite for photolysis. A surface-mediated reaction process was proposed that the photodegradation of DMP assisted by TiO₂ particles occurred primarily at the surface of the photocatalyst rather than in the homogeneous phase. According to Langmuir–Hinshelwood model, the adsorption constant determined from the dark adsorption was far less than that obtained in the light condition. Enhanced DMP adsorption on the surface of TiO₂ under irradiation was the possible reason for the improvement of photodegradation efficiency. Under the irradiation of light, a synergistic mechanism of adsorption and photocatalysis was responsible for DMP degradation. The quantitative analysis by adding scavengers indicated that ^·OH radical was primarily responsible for the photodegradation of DMP. It was further verified that ^·OH was produced much more from conduction band electrons rather than valance band holes toward photodegradation of DMP by adding foreign Cu²⁺.     

Probabilistic calibration of a coupled hydro-mechanical slope stability model with integration of multiple observations

Multiple types of responses, such as displacements, ground water level, pore water pressures, water contents, etc., are usually measured in comprehensive monitoring programmes for rainfall-induced landslide prevention. In this study, a probabilistic calibration method for coupled hydro-mechanical modelling of slope stability is presented with integration of multiple types of measurements. A numerical example of a soil slope under rainfall infiltration is illustrated to compare the effects of single and multiple types of responses on parameter estimation and model calibration. The results show that the soil parameters can be estimated with less uncertainty and total uncertainty bounds are narrower with multiple types of responses than with a single type of response. Model calibration based on multiple types of responses can compromise different responses and hence the means and standard deviations of model error are the smallest. A feasible correlation coefficient between soil modulus and permeability can be obtained from model calibration with multiple types of responses and single type of response as long as the responses include displacement data.     

Application of a unified linear yield criterion in plane strain to study the strength theory effect in geotechnical engineering

The plane strain condition is a common, but polyaxial stress state for geotechnical structure designs, in which the selection of an appropriate yield or failure criterion is crucial to reasonably account for the intermediate principal stress. Under plane strain condition, a unified linear yield criterion for seven commonly used geotechnical yield criteria is presented in conjunction with the inductive method. These seven yield criteria considered in this study are the Mohr–Coulomb, Tresca, Drucker–Prager, Mogi–Coulomb, Extended Matsuoka–Nakai, Extended Lade–Duncan criteria, and the Unified Strength Theory. The generalized analytical solutions for earth pressure of retaining walls, critical load of strip foundations as well as stress and displacement of circular tunnels are derived on the basis of the proposed unified yield criterion, and their respective theoretical significance is analyzed. Thereafter, the critical load of strip foundations obtained herein is compared with two numerical results from the literature. Furthermore, the effect of strength theory on result differences of the three typical geotechnical problems by simply selecting constants, which conform to different yield criteria, is explored through a parametric study. It is found that the proposed unified yield criterion is convenient for investigating analytical solutions of the aforementioned geotechnical structures. The strength theory effect due to adopting different yield criteria is considerably significant, which cannot be ignored. Additionally, recommendations are provided on how to make use of these seven yield criteria for an optimum design.     

Effects of mechanical layering on hydraulic fracturing in shale gas reservoirs based on numerical models

Generally, induced hydraulic fractures are generated by fluid overpressure and are used to increase reservoir permeability through forming interconnected fracture systems. However, in heterogeneous and anisotropic rocks, many hydraulic fractures may become arrested or offset at layer contacts under certain conditions and do not form vertically connected fracture networks. Mechanical layering is an important factor causing anisotropy in sedimentary layers. Hence, in this study, with a shale gas reservoir case study in the Longmaxi Formation in the southeastern Chongqing region, Sichuan Basin, we present results from several numerical models to gain quantitative insights into the effects of mechanical layering on hydraulic fracturing. Results showed that the fractured area caused by hydraulic fracturing indicated a linear relationship with the neighboring layer’s Young’s modulus. An increase of the neighboring layer’s Young’s modulus resulted in better hydraulic fracturing effects. In addition, the contact between two neighboring layers is regarded as a zone with thickness and mechanical properties, which also influences the effects of hydraulic fracturing in reservoirs. The initial hydraulic fracture was unable to propagate into neighboring layers under a relatively low contact’s Young’s modulus. When associated local tensile stresses exceeded the rock strength, hydraulic fractures propagated into neighboring layers. Moreover, with the contact’s Young’s modulus becoming higher, the fractured area increased rapidly first, then slowly and finally became stable.     

Carbon and nitrogen isotope,and mineral inclusion studies on the diamonds from the Pozanti–Karsanti chromitite,Turkey

The Pozanti–Karsanti ophiolite (PKO) is one of the largest oceanic remnants in the Tauride belt, Turkey. Micro-diamonds were recovered from the podiform chromitites, and these diamonds were investigated based on morphology, color, cathodoluminescence, nitrogen content, carbon and nitrogen isotopes, internal structure and inclusions. The diamonds recovered from the PKO are mainly mixed-habit diamonds with sectors of different brightness under the cathodoluminescence images. The total δ¹³C range of the PKO diamonds varies between ??18.8 and ??28.4‰, with a principle δ¹³C mode at ??25‰. Nitrogen contents of the diamonds range from 7 to 541 ppm with a mean value of 171 ppm, and the δ¹⁵N values range from ??19.1 to 16.6‰, with a δ¹⁵N mode of ??9‰. Stacking faults and partial dislocations are commonly observed in the Transmission Electron Microscopy foils whereas inclusions are rather rare. Combinations of (Ca_0.81Mn_0.19)SiO₃, NiMnCo-alloy and nano-sized, quenched fluid phases were observed as inclusions in the PKO diamonds. We believe that the ¹³C-depleted carbon signature of the PKO diamonds derived from previously subducted crustal matter. These diamonds may have crystallized from C-saturated fluids in the asthenospheric mantle at depth below 250 km which were subsequently carried rapidly upward by asthenospheric melts.