Research on Water-Taking Characteristics of Huanghua Power Plant Reach

In this paper the water-taking characteristics of the first,the second and the third stage of theHuanghua Power Plant are studied by numerical model and physical model.The results show that the pres-ent inlet channel only satisfies the supply need of the first stage of the power plant.If the riverbed of the in-let reach is properly dredged,the need of water supply for the third stage of the power plant could be met.     

锦州湾表层海水微塑料分布特征

海洋微塑料是全球关注的新兴环境问题,海湾由于特殊的地理环境特征,成为微塑料分布研究的热点区域。本研究以锦州湾为研究海域,于2017年10月布设了11个点位开展表层海水微塑料样品采集,在实验室采用湿式氧化法开展样品前处理,应用傅立叶变换显微红外光谱仪分析鉴定微塑料成分。研究结果表明,锦州湾表层水体微塑料平均丰度为(0.93±0.59)个/m³,微塑料数量占全部塑料样品的96.2%。微塑料的主要成分为聚丙烯和聚乙烯,分别占55.0%和23.5%;线状和片状塑料的比例最高,分别占41.7%和26.2%;白色、蓝色和半透明微塑料分别占35.1%、26.0%和21.4%。受水动力条件和陆域河流输入等影响,锦州湾表层水体中微塑料的空间分布整体呈现北部偏高,向南部递减的趋势。     

绿色海堤的沉积地貌与生态系统动力学原理: 研究综述*

绿色海堤是传统结构工程与海岸生态系统共同组合而成的新型海堤, 用以应对未来海面上升、风暴加剧给低地海岸防护带来的挑战。需解决的问题主要有海岸生态系统消浪过程及生态系统在海堤体系中的配置方式。理论分析、现场观测、物模数模所获结果表明, 海岸生态系统确有显著的消浪功能: 1) 陆架泥区消浪, 其机制以再悬浮和浮泥运动为主, 底部摩擦为次; 2) 潮滩下部的粉砂细砂滩底部摩擦和推移质运动共同造成波能耗散, 而上部的泥滩则以再悬浮和悬沙输运为主; 3) 在盐沼、红树林、海草床等由植被构成的生态系统, 植物通过形态阻力、茎秆运动来阻滞水流、耗散波能, 其效能高于沉积物床面对波能的耗散; 4) 生物礁主要有珊瑚礁和牡蛎礁, 其消能作用主要通过床面摩擦和波浪破碎, 效能较高, 尤其是在风暴期间。生态系统如何成为海堤的有机组成部分, 尤其是侵蚀型海岸的生态位修复和绿色海堤整体设计, 还需进一步研究相关的科学问题: 与硬质工程结合的盐沼-牡蛎礁的适应性生物学; 未来环境变化条件下生态系统的稳定性; 绿色海堤生态系统空间配置及其与风暴事件的时间尺度匹配; 基于均衡剖面理论的海堤形态优化。     

FIO-ESM v2.0 CORE2-forced experiment for the CMIP6 Ocean Model Intercomparison Project

We introduced the Coupled Model Intercomparison Project Phase 6 (CMIP6) Ocean Model Intercomparison Project CORE2-forced (OMIP-1) experiment by using the First Institute of Oceanography Earth System Model version 2.0 (FIO-ESM v2.0), and comprehensively evaluated the simulation results. Unlike other OMIP models, FIO-ESM v2.0 includes a coupled ocean surface wave component model that takes into account non-breaking surface wave-induced vertical mixing in the ocean and effect of surface wave Stokes drift on air-sea momentum and heat fluxes in the climate system. A sub-layer sea surface temperature (SST) diurnal cycle parameterization was also employed to take into account effect of SST diurnal cycle on air-sea heat ?uxes to improve simulations of air-sea interactions. Evaluations show that mean values and long-term trends of significant wave height were adequately reproduced in the FIO-ESM v2.0 OMIP-1 simulations, and there is a reasonable fit between the SST diurnal cycle obtained from in situ observations and that parameterized by FIO-ESM v2.0. Evaluations of model drift, temperature, salinity, mixed layer depth, and the Atlantic Meridional Overturning Circulation show that the model performs well in the FIO-ESM v2.0 OMIP-1 simulation. However, the summer sea ice extent of the Arctic and Antarctic is underestimated.     

Formation of saddle dolomites in Upper Cambrian carbonates, western Tarim Basin (northwest China): Implications for fault-related fluid flow

The saddle dolomites occur more intensely in cores closely to fault than that in cores far away from the fault in Upper Cambrian carbonate of western Tarim basin, suggesting that formation of the saddle dolomites is likely related to fault-controlled fluid flow. They partially fill in fractures and vugs of replacement dolomite. The saddle dolomites exhibit complex internal textures, commonly consisting of core and cortex. In comparison with the matrix dolomites, the saddle dolomites show lower Sr-content and ⁸⁷Sr/⁸⁶Sr ratios, higher Fe- and Mn-content, and more negative δ¹⁸O values. Combined with high Th (100–130 °C) of primary fluid inclusions, it is suggested that the saddle dolomites precipitated from hydrothermal fluid derived from the deep evaporite-bearing Middle Cambrian strata, and the magnesium source may be due to dissolution of host dolomite during hydrothermal fluid migration. Fault activity resulted in petrographic and geochemical difference of the core and cortex of the saddle dolomites. The cores precipitated from the formation water mixed by deep brines at the early stage of fault activity, and the cortexes precipitated from the deep fluid with higher temperatures through the Middle Cambrian later. In summary, the formation of the saddle dolomites implies a hydrothermal fluid event related to fault activity, which also resulted in high porosity in Upper Cambrian carbonate in western Tarim Basin.     

地形与热源强迫下的南方涛动

用El Nino和La Nina位相时的海温异常和地形作为大气下垫面的异常强迫,引入IAP的两层原始方程大气环流模式,模拟出了南方涛动的典型结构.当去掉地形后,仅仅由海温异常也能模拟出太平洋东西部的气压异常振荡,但太平洋东部振荡中心的位置并不与观测的一致.由此可见,观测到的南方涛动是在实际地形下对全球海温异常的响应.     

青岛2006年“8．26”暴雨过程的中尺度分析

多普勒天气雷达和L-波段探空雷达在探测中尺度天气方面,各有长处.前者具有较高的时空分辨率,缺点是需要反演.后者数据直接且要素多,但为局地数据,存在代表性的问题.利用多普勒雷达反演风廓线和300 m分辨率的探空数据相结合,可以很好的解释2006年8月26日发生在青岛的一次对流性暴雨过程的演变.在这次过程中,300 m分辨率的探空数据捕捉到了2 km左右高度上的冷平流信息,而多普勒雷达反演数据显示,温度平流对于对流的发生发展和消亡起着非常重要的作用.而且,多普勒雷达反演数据还揭示,在天气尺度影响系统仍然存在的背景下,冷平流的持续作用,引起了青岛上空大气状态的变化,导致整个降水过程结束.     

不同海区石英悬浮体颗粒表面微结构特征及其成因

悬浮石英颗粒表面在不同的水动力环境中会形成一些特有的表面结构,对这些特点的研究有助于理解微小颗粒在水中的行为以及沉积环境的变化。基于对在不同海区采取表层和不同深度的悬浮石英颗粒表面结构的扫描电镜的观察, 发现在水动力较强的南海海域石英颗粒表面大多呈现出机械作用成因的结构,化学溶蚀痕迹不明显;马六甲海峡、孟加拉湾南部海域、阿拉伯海东部海域站位石英颗粒表面开始出现明显的化学溶蚀痕迹,为机械-化学溶蚀作用的结果;莫克兰海沟站位表层样品石英颗粒表面化学溶蚀作用强烈,随着深度的增加,溶蚀作用减弱,200m水深以下,石英颗粒表面的结构主要为机械-化学溶蚀作用的结果。中国南海西南部3号站位、马六甲海峡北部7号站位以及孟加拉湾南部的11号站位的表层石英悬浮体颗粒较大,可以达到10μm左右,大于其他海区的石英颗粒(3～4μm)。研究海区海水中悬浮体石英颗粒大都呈现棱角状,表现为近源沉积,偶尔可见磨圆度较好且表面有新月形撞击坑,推测可能为风尘沉积。     

江苏海岸中部近岸冬季潮汐和潮流特征

南黄海西侧的江苏海岸近岸区域,素以地形复杂、潮流强劲、悬沙输运剧烈著称,但是较长期的同步潮位和潮流观测数据仍然缺乏,尤其是在近岸(20 km)浅水(20 m)区域。2014年1月在大丰港附近开展了连续潮位和潮流观测,获得的数据揭示了一系列特征。此地潮汐潮流为正规半日潮,浅水分潮显著。平均潮差为3.05 m,最显著的两个分潮为M2和S2分潮,振幅分别为1.45 m和0.52 m。潮流最显著的半日分潮M2分潮和最显著的浅水分潮M4分潮在沿岸方向上振幅分别为0.84m/s和0.12m/s,在跨岸方向上振幅分别为0.24 m/s和0.01 m/s,沿岸方向占绝对优势。潮波的沿岸传播介于前进波和驻波之间,驻波的特征稍强。M2分潮潮流椭圆最大流(长轴)方向为南偏东7.4°。存在冬季沿岸向北的余流,垂向平均值的大小为2.2 cm/s。以上潮汐潮流特征为该区域海洋物质输运研究提供了基础资料。