Early Permian–Late Triassic Magmatism in the Tuotuohe Region of the Qinghai–Tibet Plateau: Constraints on the Tectonic evolution of the Western Segment of the Jinshajiang Suture

In this paper we present new zircon U–Pb ages, whole-rock major and trace element analyses, and zircon Hf isotopic data for magmatic rocks in the Tuotuohe region of the western segment of the Jinshajiang suture. Our aim is to constrain the Early Permian–Late Triassic tectonic evolution of the region. Zircons from the magmatic rocks of the Tuotuohe region are euhedral–subhedral in shape and display fine-scale oscillatory zoning as well as high Th/U ratios(0.4–4.6), indicating a magmatic origin. The zircon U–Pb ages obtained using LA–ICP–MS are 281 ± 1 Ma, 258 ± 1 Ma, 244 ± 1 Ma, and 216 ± 1 Ma, which indicate magmatism in the Early Permian–Late Triassic. A diorite from Bashihubei(BSHN) has SiO2 = 57.18–59.97 wt%, Al2O3 = 15.70–16.53 wt%, and total alkalis(Na2O + K2O) = 4.46–6.34 wt%, typical of calc-alkaline and metaluminous series. A gabbro from Bashibadaoban(BSBDB) belongs to the alkaline series, and is poor in SiO2(45.46–54.03 wt%) but rich in Al2O3(16.19–17.39 wt%) and total alkalis(Na2O + K2O = 5.48–6.26 wt%). The BSHN diorite and the BSBDB gabbro both display an enrichment of LREEs and LILEs and depletion of HFSEs, and they have no obvious Eu anomaly; they have relatively low MgO contents(2.54–4.93 wt%), Mg# values of 43 to 52, and low Cr and Ni contents(8.07–33.6 ppm and 4.41–14.2 ppm, respectively), indicating they differentiated from primitive mantle magmas. They have low Nb/U, Ta/U, and Ce/Pb ratios(1.3–9.6, 0.2–0.8, and 0.1–18.1, respectively), and their initial Hf isotopic ratios range from +9.6 to +16.9(BSHN diorite) and +6.5 to +12.6(BSBDB gabbro), suggesting their primary magmas were derived mainly from the partial melting of a mantle wedge that had been metasomatized by subduction fluids. Taking all the new data together, we conclude that the western and eastern segment of the Jinshajiang suture regions underwent identical processes of evolution in the Early Permian–Late Triassic: oceanic crust subduction before the Early Permian, continental collision during the Early–Middle Triassic, and post-collisional extension from the Late Triassic.     

贵州涟江惠水段河流阶地特征与地貌演化研究

贵州涟江惠水段级次清晰的四级阶地是流域地貌阶段性演化的直观记录。笔者等利用差分GPS测量法精确厘定了涟江阶地的级序和高程,结合剖面观测发现从上游到下游,涟江惠水段阶地标高和级差逐渐降低,地貌面整体呈“收拢”趋势;阶地沉积物呈现砾石层厚度变小,砾石含量降低、砾径减小,砂质沉积占比增大趋势;阶地类型从基座阶地为主向堆积阶地为主演变。光释光（OSL）测年显示,T1阶地埋藏年龄31.2±2.0 ka BP到14.7±1.3 ka BP,T2阶地122.4±8.5 ka BP到66.9±3.8 ka BP,阶地年龄与贵州高原其他流域十分相近,具有同步演化特征。结合阶地时代和发育特征,认为贵州高原河流阶地是构造运动的产物。涟江四级阶地记录了在更新世以来四次构造抬升背景下,流域经过多期自北向南“削高补低”的地貌改造,逐步由构造洼地演变为山间盆地的地貌过程。     

探地雷达野外勘察数据干扰及其滤除方法

针对探地雷达的数据干扰问题,讨论了探地雷达接收波的种类和速度参数,确定干扰信息,并分别对电线杆、架空线路、山体等各种干扰体进行了实例分析,利用到达时间和传播速度上的差异,综合运用反褶积、FK滤波、偏移等方法对干扰进行了滤波处理,结果显示多次波、弧形干扰、水平干扰等一系列干扰都被有效滤除,突出了有效波.证明这种滤波思路和方法是可行的,能够为下一步的解释工作打下良好基础.     

四种湍流模型对空化流动模拟的比较

采用四种湍流模型对NACA66水翼空化流动进行模拟,分析了不同湍流模型和壁面函数对空化流动模拟结果的影响.分析结果表明:ASM模型和RNG k-ε模型对空化数不敏感,且计算精度较高;Realizable k-ε模型对空化数的变化很敏感,对不同的空化数计算精度相差很大;标准k-ε模型对空化数不敏感,但精度不高.增强壁面函数法对空化数不敏感,计算精度较高;标准壁面函数法和非平衡壁面函数法对空化数有一定的敏感性,但计算结果差异不大.     

Using of Key Stratum Theory to Study the Structural Development of Roof Aquifer

<正>During the underground mining of coal resources,overlying rocks on the roof of excavated tunnels will be destroyed due to ground pressure,and as a result,part of them will break and fall into the tunnels.How to determine the distribution of fractured areas and fissures presents a major problem for preserving the overlying aquifer.In most cases,the distribution of fissures induced     

筑堤土防渗性状试验研究

结合淮河入海水道河道工程,通过渗透变形试验确定了筑堤土料的渗透变形型式、临界水力坡降和允许坡降,同时指出了采用泓道开挖土筑堤的施工控制措施、质量要求和防渗措施。     

基于RAGA的指数曲线模型预测基桩承载力

预测挤扩支盘桩单桩极限承载力指数曲线模型的函数表达式是一个超定非线性方程。采用传统的最小二乘法对该模型参数进行回归处理时,往往由于计算复杂和人为因素的影响使预测结果存在较大的误差。为此,用实数编码加速遗传算法（RAGA）,对指数曲线模型的参数和理论极限承载力进行优化,并基于MATLAB环境下编写了模型的计算程序。结合工程实例,应用指数曲线模型对挤扩支盘桩静载荷试验实测数据进行了拟合分析。结果表明,基于RAGA的指数曲线优化模型能够更好地拟合实测数据和有效地预测单桩极限承载力,且基于RAGA的指数曲线优化模型具有求解速度快、计算精度和自动化程度高、人为干扰因素小、通用性强等优点。     

汶川5.12地震发震机理的数值模拟

将围岩看成弹性体, 断层看成具有应变软化的弹塑性体, 断层和围岩组成统一的地质介质系统。在给定的地应力、孔隙压力及边界位移的作用下, 应力逐渐积累, 当达到断层强度时, 断层进入塑性状态, 应变随之软化, 应力突然下降, 能量突然释放, 形成地震。根据这个原理, 利用有限差分FLAC软件, 对汶川5.12地震的机理进行了模拟。模拟结果证实:汶川5.12地震是在青藏高原侧向挤压, 四川盆地阻挡, 使龙门山断裂带受到缓慢增加的挤压应力场作用下形成的。计算结果给出了应力降、能量释放量、断层错动量、地震同震位移、震前位移、地震复发周期等重要参数, 结果与野外调查及其它资料给出的数据具有较好的一致性。      

云南石林世界地质公园阿诗玛石柱碳酸盐岩 显微特征及沉积环境

云南石林世界地质公园阿诗玛石柱,其岩石地层是呈水平产状的中二叠统茅口组厚层块状灰岩,但其构成岩石的具体岩性却未见做过详细工作。笔者等经公园管理部门同意,自下而上分别在阿诗玛石柱背侧底部、下部、中部、上部和顶部共采集样品五块,对其岩石学特征及沉积微相作了详细研究,弄清了这一世界著名景点自下而上的岩石构成及沉积相。底部为高能浅滩相灰色厚层块状具平行层理生屑颗粒灰岩,构成阿诗玛脚部。下部为中能浅潮下灰色厚层块状虫筳生屑泥粒灰岩,构成阿诗玛腿部。中部为中能浅潮下灰色厚层块状砂屑泥粒灰岩,构成阿诗玛腰部。上部为中能浅潮下灰色厚层块状具生物扰动含砂屑生屑泥粒灰岩,构成阿诗玛胸部;顶部为高能浅滩相灰色厚层块状砂屑生屑颗粒灰岩,构成阿诗玛头部。其中含有大量生物化石碎屑:有孔虫、三叶虫、藻类、介形虫、腕足、苔藓虫、虫筳、海百合茎、双壳类,为高能浅滩相和中等能量浅潮下环境。希能为石林形成过程研究和科学普及提供参考。     

内蒙古东乌旗阿尔哈达铅锌矿区矿床成因探讨

阿尔哈达铅锌矿主要产于泥盆系的NW向断裂破碎带中，矿体具雁行排列、局部交叉产出的特征，以盲矿体为主；成矿早期可能以岩浆热液（399-407℃）为主，而中、晚期的热液以大气降水或混合水（194-287℃）为主；硫分别来源于岩浆热液、沉积地层和大气降水；铅同位素测试结果则显示了成矿（岩）物质的混源特点。矿床为与岩浆热液有关的受断裂控制的中温热液铅锌（银）矿。