A note on the overall vorticity balance in wind-driven ocean circulation

Some constraints resulting from a required overall vorticity balance in an ocean forced by a net wind-stress curl are considered. It is pointed out that the Sverdrup balance holds for Ekman-geostrophic flow in an area-averaged sense even in the presence of topography. It is suggested that nonlinear stretching and twisting of vorticity in an inertial boundary current may provide a source of vorticity which may balance a net wind-stress curl, without help of frictional effects at the bottom or sides. It is also suggested that potential vorticity generated by the wind-stress curl can be balanced by other local potential vorticity sources in the top layer. At this stage no proof for the need of bottom or side friction in a generally stratified ocean exists, and a counterexample is also lacking, leaving the question open for further studies.     

Effects of hydrocarbon contamination on a free living marine nematode community: results from microcosm experiments

Anthropogenic inputs of crude and refined petroleum hydrocarbons into the sea require knowledge of the effects of these contaminants on the receiving assemblages of organisms. A microcosm experiment was carried out to study the influence of diesel on a free living nematode community of a Tunisian lagoon. Sediments were contaminated by diesel that ranged in concentration from 0.5 to 20 mg diesel kg⁻¹ dry weight (dw), and effects were examined after 90 days. Gradual changes in community structure were revealed depending on the quantity of diesel administrated. In the medium (1 mg diesel kg⁻¹ and 5 mg diesel kg⁻¹ (dw)) and high (10 mg diesel kg⁻¹, 15 mg diesel kg⁻¹ and 20 mg kg⁻¹ (dw)) treated microcosms, most univariate measures, including diversity and species richness, decreased significantly with increasing level of diesel contamination whereas nematode assemblage from the low treated microcosm (0.5 mg diesel kg⁻¹ (dw)) remained unaffected. Results from multivariate analyses of the species abundance data demonstrated that responses of nematode species to the diesel treatments were varied: Chaetonema sp. was eliminated at all doses tested and seemed to be intolerant species to diesel contamination; Pomponema sp. and Oncholaimus campylocercoïdes were significantly affected at all diesel contamination levels but they were not eliminated, these species were categorized as “diesel-sensitive”; Hypodontolaimus colesi, Daptonema trabeculosum and Daptonema fallax which significantly increased respectively at 0.5, 1 and 5 mg diesel kg⁻¹ (dw) concentrations and appeared to be “opportunistic” species at these doses whereas Marylynnia stekhoveni which increased at all high doses (10, 15 and 20 mg diesel kg⁻¹ (dw)) seemed to be a “diesel-resistant” species.     

Surface area, porosity and water adsorption properties of fine volcanic ash particles

Our understanding on how ash particles in volcanic plumes react with coexisting gases and aerosols is still rudimentary, despite the importance of these reactions in influencing the chemistry and dynamics of a plume. In this study, six samples of fine ash (<100 m) from different volcanoes were measured for their specific surface area, a_s, porosity and water adsorption properties with the aim to provide insights into the capacity of silicate ash particles to react with gases, including water vapour. To do so, we performed high-resolution nitrogen and water vapour adsorption/desorption experiments at 77 K and 303 K, respectively. The nitrogen data indicated a_s values in the range 1.1–2.1 m²/g, except in one case where a a_s of 10 m²/g was measured. This high value is attributed to incorporation of hydrothermal phases, such as clay minerals, in the ash surface composition. The data also revealed that the ash samples are essentially non-porous, or have a porosity dominated by macropores with widths >500 Å. All the specimens had similar pore size distributions, with a small peak centered around 50 Å. These findings suggest that fine ash particles have relatively undifferentiated surface textures, irrespective of the chemical composition and eruption type. Adsorption isotherms for water vapour revealed that the capacity of the ash samples for water adsorption is systematically larger than predicted from the nitrogen adsorption a_s values. Enhanced reactivity of the ash surface towards water may result from (i) hydration of bulk ash constituents; (ii) hydration of surface compounds; and/or (iii) hydroxylation of the surface of the ash. The later mechanism may lead to irreversible retention of water. Based on these experiments, we predict that volcanic ash is covered by a complete monolayer of water under ambient atmospheric conditions. In addition, capillary condensation within ash pores should allow for deposition of condensed water on to ash particles before water reaches saturation in the plume. The total mass of water vapour retained by 1 g of fine ash at 0.95 relative water vapour pressure is calculated to be ~10^–2 g. Some volcanic implications of this study are discussed.Editorial responsibility: J. Gilbert     

Effects of 12 years' operation of a sewage treatment plant on trace metal occurrence within a Mediterranean commercial sponge (Spongia officinalis, Demospongiae)

The present field study uses Spongia officinalis for assessing trace metals occurrence in time and space within Mediterranean rocky communities. Nine sites were selected in the Marseille area for studying spatial trends in 12 metal concentrations. Long term changes in 8 metal concentrations were assessed at sites that had been sampled before and 12 years after the opening of a treatment plant. Spongia officinalis highly concentrated all the trace metal surveyed excepted Hg and Cd. The overall contamination level registered provided a classification of the study sites which is congruent with that given by other studies on pollutant accumulation in neighbouring sandy-bottoms or benthic assemblages. Among the metals studied, Fe, Pb, Cr are those that best highlighted a pollution gradient. In the present study, only Cd concentration did not vary in space. Except for Ni, all pollutant concentrations clearly decreased between 1984 and 1999. This very impressive decrease in heavy metal concentrations within the Marseille area represents an indisputable evidence of the improvement of the seawater quality resulting from 12 years' operation of the Marseille sewage plant. Moreover, the significant decrease also recorded in the reference population at Port-Cros might reflect an overall improvement in the seawater quality of the NW Mediterranean.     

Some characteristics of an S-component of solar radiation identified on November 1966 eclipse at 4.28-cm wavelength

A strong S-component of solar radiation was identified during the total solar eclipse of November 12, 1966. Its characteristics, as measured at 4.28 cm, were studied in terms of flux and polarization, and its spectral features were derived by the use of data from other observatories. The whole source presented approximately the typical characteristics suggested by some authors in the last few years, and further it has been shown that it could be resolved into at least two enhanced regions, one showing unpolarized radiation with a brightness temperature T _b 1.2 × 10⁶ °K, and the other showing 50% of left-handed circularly polarized radiation, with T _b 0.7 × 10⁶ °K. The source's overall characteristics favour the presence of non-thermal absorption at the emitting regions.     

Matching solute breakthrough with deterministic and stochastic aquifer models

Two different deterministic and two alternative stochastic (i.e., geostatistical) approaches to modeling the distribution of hydraulic conductivity (K) in a nonuniform (sigma2ln(K)) = 0.29) glacial sand aquifer were used to explore the influence of conceptual model selection on simulations of three-dimensional tracer movement. The deterministic K models employed included a homogeneous effective K and a perfectly stratified 14 layer model. Stochastic K models were constructed using sequential Gaussian simulation and sequential i ndicator simulation conditioned to available K values estimated from measured grain size distributions. Standard simulation software packages MODFLOW, MT3DMS, and MODPATH were used to model three-dimensional ground water flow and transport in a field tracer test, where a pulse of bromide was injected through an array of three fully screened wells and extracted through a single fully screened well approximately 8 m away. Agreement between observed and simulated transport behavior was assessed through direct comparison of breakthrough curves (BTCs) and selected breakthrough metrics at the extraction well and at 26 individual multilevel sample ports distributed irregularly between the injection and extraction wells. Results indicate that conceptual models incorporating formation variability are better able to capture observed breakthrough behavior. Root mean square (RMS) error of the deterministic models bracketed the ensemble mean RMS error of stochastic models for simulated concentration vs. time series, but not for individual BTC characteristic metrics. The spatial variability models evaluated here may be better suited to simulating breakthrough behavior measured in wells screened over large intervals than at arbitrarily distributed observation points within a nonuniform aquifer domain.     

Atomic oxygen distribution in the Venus mesosphere from observations of O2 infrared airglow by VIRTIS-Venus Express

This VIRTIS instrument on board Venus Express has collected spectrally resolved images of the Venus nightside limb that show the presence of the (0,0) band of the infrared atmospheric system of O₂ at 1.27 μm. The emission is produced by three-body recombination of oxygen atoms created by photodissociation of CO₂ on the dayside. It is consistently bright so that emission limb profiles can be extracted from the images. The vertical distribution of O₂() may be derived following Abel inversion of the radiance limb profiles. Assuming photochemical equilibrium, it is combined with the CO₂ vertical distribution to determine the atomic oxygen density. The uncertainties on the O density caused by the Abel inversion reach a few percent at the peak, increasing to about 50% near 120 km. We first analyze a case when the CO₂ density was derived from a stellar occultation observed with the SPICAV spectrometer simultaneously with an image of the O₂ limb airglow. In other cases, an average CO₂ profile deduced from a series of ultraviolet stellar occultations is used to derive the O profile, leading to uncertainties on the O density less than 30%. It is found that the maximum O density is generally located between 94 and 115 km with a mean value of 104 km. It ranges from less than 1×¹⁰¹¹ to about 5×¹⁰¹¹ cm⁻³ with a global mean of 2.2×¹⁰¹¹ cm⁻³. These values are in reasonable agreement with the VIRA midnight oxygen profile. The vertical O distribution is generally in good agreement with the oxygen profile calculated with a one-dimensional chemical-diffusive model. No statistical latitudinal dependence of the altitude of the oxygen peak is observed, but the maximum O density tends to decrease with increasing northern latitudes. The latitudinal distribution at a given time exhibits large variations in the O density profile and its vertical structure. The vertical oxygen distribution frequently shows multiple peaks possibly caused by waves or variations in the structure of turbulent transport. It is concluded that the O₂ infrared night airglow is a powerful tool to map the distribution of atomic oxygen in the mesosphere between 90 and 115 km and improve future Venus reference atmosphere models.