Large temporal changes in contributions of groundwater-borne nutrients to coastal waters off a volcanic island

We examined the contribution of submarine groundwater discharge (SGD) to nutrient budgets in Hwasun Bay, Jeju Island, Korea in August 2009, October 2014, and May 2015. The concentrations of dissolved inorganic nitrogen (DIN) and dissolved inorganic phosphorus (DIP) in fresh groundwater were in the range of 285?716 μM and 2.3?3.2 μM, respectively, which were each 1?2 orders of magnitude higher than those in the bay seawater. The outer-bay seawater flowing into the bay was oligotrophic (2.9 ± 1.9 μM for DIN and 0.2 ± 0.3 μM for DIP). Nutrient budget calculations were performed for each season by accounting for submarine fresh groundwater discharge (SFGD) and water residence times. In August 2009 (DIN = 1.8 μM and DIN:DIP ratio = 4.6 for the outerbay water), DIN inputs from SFGD accounted for approximately 40% of the DIN inventory in the bay seawater. In October 2014 (DIN = 1.1 μM and DIP < 0.05 μM for the outer-bay water), DIP from SFGD accounted for approximately 100% of the DIP inventory in the bay seawater. In May 2015, mean concentrations of DIN and DIP in the bay seawater were 8.6 ± 12 μM and 0.11 ± 0.04 μM, respectively, with conservative behaviors in the bay seawater in association with excessive groundwater inputs. These results imply that SGD plays a critical but different role in nutrient budgets and stoichiometry in coastal waters off a volcanic island depending on open-ocean nutrient conditions.     

Annual gametogenesis and reproductive effort of the limpet <Emphasis Type="Italic">Cellana grata</Emphasis> (Gould, 1859) (Gastropoda: Nacellidae) in a rocky intertidal beach at Ulleungdo Island off the east coast of Korea

Widely distributed from the northern coast of Vietnam to the northern Japan, the limpet Cellana grata (Gould, 1859) occurs commonly on the south and east coasts of Korea. Despite their wide distribution range, few studies have investigated the annual gametogenesis and reproductive effort of C. grata. In an attempt to understand the reproductive physiology of the limpet, we investigated the annual gametogenesis and reproductive effort of C. grata from Ulleungdo Island off the east coast of Korea. Histology revealed that the gonial mitosis commenced in January, as the female exhibited small oogonia (10–40 μm) in the follicle. From March to June, the oocyte size increased dramatically, and fully mature eggs (110–170 μm in diameter) appeared in early summer. First spawning males and females were observed in July, as the surface seawater temperature (SST) reached 22.1°C. The spawning male and females could be observed until the end of December. Gonad somatic index (GSI), a ratio of gonad mass to the total tissue weight, of the male ranged from 0.6 (April) to 17.9 (July), while the female GSI varied from 1.0 (February) to 18.3 (July). GSI of male and female declined rapidly from July to August, suggesting that the major purse of the spawning at the study site was between July and August. Our study suggested that the commercial catch of C. grata during July and August must be suspended at Ulleungdo Island, in order to protect the spawning limpets, which enhances C. grata recruitment and the population.     

Study on Sound-Speed Dispersion in A Sandy Sediment at Frequency Ranges of 0.5–3 kHz and 90–170 kHz

In order to study the properties of sound-speed dispersion in a sandy sediment, the sound speed was measured both at high frequency(90–170 k Hz) and low frequency(0.5–3 k Hz) in laboratory environments. At high frequency, a sampling measurement was conducted with boiled and uncooked sand samples collected from the bottom of a large water tank. The sound speed was directly obtained through transmission measurement using single source and single hydrophone. At low frequency, an in situ measurement was conducted in the water tank, where the sandy sediment had been homogeneously paved at the bottom for a long time. The sound speed was indirectly inverted according to the traveling time of signals received by three buried hydrophones in the sandy sediment and the geometry in experiment. The results show that the mean sound speed is approximate 1710–1713 m/s with a weak positive gradient in the sand sample after being boiled(as a method to eliminate bubbles as much as possible) at high frequency, which agrees well with the predictions of Biot theory, the effective density fluid model(EDFM) and Buckingham's theory. However, the sound speed in the uncooked sandy sediment obviously decreases(about 80%)both at high frequency and low frequency due to plenty of bubbles in existence. And the sound-speed dispersion performs a weak negative gradient at high frequency. Finally, a water-unsaturated Biot model is presented for trying to explain the decrease of sound speed in the sandy sediment with plenty of bubbles.     

Numerical simulation of groundwater flowing to horizontal seepage wells under a river

A horizontal seepage well, consisting of an interconnected vertical well, galleries, chambers and small-diameter radiating bores, is used to acquire relatively clean water that has been filtered through natural alluvial deposits in a riverbed. It has wide application, especially in arid and semi-arid areas. The lack of calculation formulae or models for horizontal seepage wells, up until now, has resulted in several false applications. Based on the analysis of groundwater flow characteristics, it has been concluded that several flow regimes coexist and hydraulic head loss exists in the horizontal seepage well. To avoid the difficulty of confirming the flux or head distribution in such a complex system, the model boundary of the whole horizontal seepage well has been moved to that of just the vertical well, and the well-aquifer system was treated as a heterogeneous medium, where the horizontal seepage well itself is a highly permeability medium. A mathematical model has been developed, based on the coupled seepage-pipe flow, by the introduction of equivalent hydraulic conductivity according to different flow regimes. Then a three-dimensional finite difference numerical model, based on the mathematical model, was developed and applied to a horizontal seepage well in China. The numerical model verified the groundwater flow characteristics of the horizontal seepage well. An erratum to this article can be found at     

Paleoproterozoic quartz-pebble conglomerate type uranium mineralisation in Mankarhachua area,Angul district,Orissa

Ground Radiometric survey of Paleoproterozoic pyritiferous quartz-pebble conglomerate (QPC) occurring to the north of Pallahara area led to the discovery of a QPC type uranium mineralisation near Mankarhachua village. Significant radioactivity is recorded in three sub-parallel uraniferous QPC horizons with metamorphosed pebbly to medium grained recrystallised massive sandstones. Detrital grains of uranothorite, thorite, radioactive allanite, monazite, zircon, minute uraninite grains in carbonaceous matter and thucolite contributes to the radioactive phases present in QPC matrix. Adsorbed U on limonite and goethite, secondary uranyl minerals in matrix, along bedding planes and fractures are commonly observed. This discovery has opened up a new horizon for future exploration for QPC type uranium mineralization in the area. The paper presents observations on geology, radioactivity, petrological and geochemical nature of the uraniferous QPC horizons.     

Mid and late Holocene forest fires and deforestation in the subalpine belt of the Iberian range,northern Spain

The conversion of subalpine forests into grasslands for pastoral use is a well-knownphenomenon, although for most mountain areas the timing of deforestation has not been determined. The presence of charcoal fragments in soil profiles affected by shallow landsliding enabled us to date the occurrence of fires and the periods of conversion ofsubalpine forest into grasslands in the Urbión Mountains, Iberian Range, Spain. We found that the treeline in the highest parts of the northwestern massifs of the Iberian Range(the Urbión, Demanda, Neila, and Cebollera massifs) is currently between 1500 and 1600 m a.s.l., probably because of pastoral use of the subalpine belt, whereas in the past it would have reached almost the highest divides(at approximately 2100–2200 m a.s.l.). The radiocarbon dates obtained indicate that the transformation of the subalpine belt occurred during the Late Neolithic, Chalcolithic, Bronze Age, Iron Age, and Middle Ages. Forest clearing was probably moderate during fires prior to the Middle Ages, as the small size of the sheep herds and the local character of the markets only required small clearings, and therefore more limited fires. Thus, it is likely that the forest recovered burnt areas in a few decades; this suggests the management of the forest and grasslands following a slash-andburn system. During the Middle and Modern Ages deforestation and grassland expansion affected most of the subalpine belt and coincided with the increasing prevalence of transhumance, as occurred in other mountains in the Iberian Peninsula(particularly the Pyrenees). Although the occurrence of shallow landslides following deforestation between the Neolithic and the Roman Period cannot be ruled out, the most extensive shallow landsliding processes would have occurred from the Middle Ages until recent times.     

Reasoning about climate uncertainty

This paper argues that the IPCC has oversimplified the issue of uncertainty in its Assessment Reports, which can lead to misleading overconfidence. A concerted effort by the IPCC is needed to identify better ways of framing the climate change problem, explore and characterize uncertainty, reason about uncertainty in the context of evidence-based logical hierarchies, and eliminate bias from the consensus building process itself.     

Effects of salinity downshock on dimethylsulfide production

During time-series observations in Sagami Bay, Japan, the concentration of dissolved dimethylsulfoniopropionate (DMSP_d), a precursor of dimethylsulfide (DMS), was negatively correlated with salinity. In the laboratory, low-salinity shock reduced DMS production rates of the natural bacterial community and induced rapid DMSP release from a dinophyte, Heterocapsa triquetra, suggesting that low-salinity shock reduced DMSP_d consumption but enhanced DMSP_d production, which agrees with the negative correlation between DMSP_d and salinity observed in Sagami bay. In addition, low-salinity shock did not affect DMSP lyase activity of H. triquetra. Low-salinity shock would increase the contribution from algae in DMS production, leading to an increase in potential DMS productivity in the environment.     

Autochthonous inheritance of zircon through Cretaceous partial melting of Carboniferous plutons: the Arthur River Complex,Fiordland, New Zealand

TIMS and SHRIMP U–Pb analyses of zircons from Milford Orthogneiss metadiorite (P = 1–1.4 GPa; T ≥ 750°C) of the Arthur River Complex of northern Fiordland reveal a bimodal age pattern. Zircons are predominantly either Paleozoic (357.0 ± 4.2 Ma) and prismatic with oscillatory zoning, or Cretaceous (133.9 ± 1.8 Ma) and ovoid with sector or patchy zoning. The younger age component is not observed overgrowing older grains. Most grains of both ages are overgrown by younger Cretaceous (~120 Ma) metamorphic zircon with very low U and Th/U (0.01). We interpret the bimodal ages as indicating initial igneous emplacement and crystallisation of a dioritic protolith pluton at ~357 Ma, followed by Early Cretaceous granulite-facies metamorphism at ~134 Ma, during which a significant fraction (~60%) of the zircon grains dissolved, and subsequently reprecipitated, effectively in situ, in partial melt pockets. The remaining ~40% of original Paleozoic grains were apparently not in contact with the partial melt, remained intact, and show only slight degrees of Pb loss. Sector zoning of the Cretaceous grains discounts their origin by solid state recrystallisation of Paleozoic grains. The alternative explanation—that the Paleozoic component represents a 40% inherited component in an Early Cretaceous transgressive dioritic magma—is considered less likely given the relatively high solubility of zircon in magma of this composition, the absence of 134 Ma overgrowths, the single discrete age of the older component, equivalent time-integrated ¹⁷⁷Hf/¹⁷⁶Hf compositions of both age groups, and the absence of the Cambrian-Proterozoic detrital zircon that dominates regional Cambro-Ordovician metasedimentary populations. Similar bimodal Carboniferous-Early Cretaceous age distributions are characteristic of the wider Arthur River Complex; 8 of 12 previously dated dioritic samples have a Paleozoic component averaging 51%. Furthermore, the age and chemical suite affinity of these and several more felsic rocks can be matched with those of the relatively unmetamorphosed Carboniferous plutonic terrane along the strike of the Mesozoic margin in southern Fiordland, also supporting the in situ derivation of the Carboniferous “inherited” component.     

Development and verification of the comprehensive model for physical properties of hydrate sediment

Natural gas hydrate is widely distributed all over the world and may be a potential resource in the near future, whereas hydrate dissociation during the development affects wellbore stability and drilling safety. However, the present modeling of hydrate reservoir parameters ignored the influence of effective stress and only considered the hydrate saturation. In this paper, a series of stress sensitivity experiments for the unconsolidated sandstone were carried out, and the influence of mean effective stress on physical parameters was obtained; a comprehensive model for the physical parameters of hydrate reservoir was developed subsequently. With the help of ABAQUS finite element software, the established comprehensive model was verified by the use of the wellbore stability numerical model of hydrate reservoir. The verification results show that ignoring the effect of mean effective stress on the parameters of hydrate formation aggravates the invasion of drilling fluid into the hydrate formation. Besides, ignoring the stress sensitivity of reservoir physical parameters will underestimate the wellbore instability during hydrate drilling, which will be a threat to the safety of gas hydrate drilling. At the end of the drilling operation, the maximum plastic strain of the model for considering and not considering stress sensitivity was 0.0145 and 0.0138, respectively. Therefore, the established comprehensive model will provide a theoretical support for accurately predicting the engineering geological disasters in hydrate development process.