Identification of Groundwater Parameters Using an Adaptative Multiscale Method

The identification of groundwater parameters in heterogeneous systems is a major challenge in groundwater modeling. Flexible parameterization methods are needed to assess the complexity of the spatial distributions of these parameters in real aquifers. In this article, we introduce an adaptative parameterization to identify the distribution of hydraulic conductivity within the large‐scale (4400 km²) Upper Rhine aquifer. The method is based on adaptative multiscale triangulation (AMT) coupled with an inverse problem procedure that identifies the parameters' distributions by reducing the error between measured and simulated heads. The AMT method has the advantage of combining both zonation and interpolation approaches. The AMT method uses area‐based interpolation rather than an interpolation based on stochastic features. The method is applied to a standard 2D groundwater model that takes into account the interactions between the aquifer and surface water bodies, groundwater recharge, and pumping wells. The simulation period covers 204 months, from January 1986 to December 2002. Recordings at 109 piezometers are used for model calibration. The simulated heads are globally quite accurate and reproduce the main dynamics of the system. The local hydraulic conductivities resulting from the AMT method agree qualitatively with existing local experimental observations across the Rhine aquifer.     

A case study of the mesoscale dynamics in the North-Western Mediterranean Sea: a combined data–model approach

The Northern current is the main circulation feature of the North-Western Mediterranean Sea. While the large-scale to mesoscale variability of the northern current (NC) is well known and widely documented for the Ligurian region, off Nice or along the Gulf of Lions shelf, few is known about the current instabilities and its associated mesoscale dynamics in the intermediate area, off Toulon. Here, we took advantage of an oceanographic cruise of opportunity, the start of a HF radar monitoring programme in the Toulon area and the availability of regular satellite sea surface temperature and chlorophyll a data, to evaluate the realism of a NEMO-based regional high-resolution model and the added value brought by HF radar. The combined analysis of a 1/64° configuration, named GLAZUR64, and of all data sets revealed the occurrence of an anticyclonic coastal trapped eddy, generated inside a NC meander and passing the Toulon area during the field campaign. We show that this anticyclonic eddy is advected downstream along the French Riviera up to the study region and disturbs the Northern current flow. This study aims to show the importance of combining observations and modelling when dealing with mesoscale processes, as well as the importance of high-resolution modelling.     

Methodology of seasonal morphological modelisation for nourishment strategies on a Mediterranean beach

A modified 2DH morphodynamical model was employed to simulate the evolution of large-scale features with major implications for beach nourishment. The study was focused on modelling the evolution of material artificially placed in different parts of the profile, extracting or adding material to the natural bars, and quantifying how the profile responds to different wave climates and nourishment placements. The simulated results were compared with field data from a Mediterranean beach.     

Pb,Hf and Nd isotope compositions of the two Réunion volcanoes (Indian Ocean): A tale of two small-scale mantle “blobs”?

Pb, Hf, Nd and Sr isotopes of basaltic lavas from the two Réunion Island volcanoes are reported in order to examine the origin of the sources feeding these volcanoes and to detect possible changes through time. Samples, chosen to cover the whole lifetime of the two volcanoes (from 2 Ma to present), yield a chemically restricted (compared to OIB lavas) but complex distribution. Réunion plume isotopic characteristics have been defined on the basis of the composition of uncontaminated shield-building lavas from the Piton de la Fournaise volcano. The average ?_Nd, ?_Hf, ⁸⁷Sr/⁸⁶Sr and ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb, and ²⁰⁸Pb/²⁰⁴Pb isotope ratios calculated for this component are + 4.4, + 9.1, 0.70411, 18.97, 15.59 and 39.03, respectively. In Pb–Pb isotope space, each volcano defines a distinct linear trend but slight variations are also detected within the various volcanic sequences. The Piton des Neiges volcano yields a distinct and significantly more scattered isotopic distribution than Piton de la Fournaise for both Pb, Hf and Nd isotope tracers. A principal component analysis of the Pb isotope data from Piton de la Fournaise reveals a major contribution of the C and EM-1 components (with a clear Dupal flavor) as main components for the modern Réunion plume. The same components have been identified for Piton des Neiges but with a stronger participation of a depleted mantle component and a weaker EM-1 contribution. The compositional change of the lavas erupted by the Piton des Neiges and Piton de la Fournaise volcanoes is attributed to the impingement of two small-scale blobs of plume material at the base of the Réunion lithosphere. Compared to other hot-spots worldwide, in particular Hawaii and Kerguelen, magmas beneath Réunion are generated from a considerably more homogeneous, compositionally more primitive plume higher in ²⁰⁶Pb. Although shallow-level contamination processes have been locally detected they did not alter significantly the composition of the plume magmas. This is tentatively attributed to mantle dynamics producing small, high-velocity blobs that ascend rapidly through the lithosphere, and to the lack of a well-developed magma chamber at depth in the lithosphere.     

Sediment flux-driven channel geometry adjustment of bedrock and mixed gravel–bedrock rivers

Sediment supply (Q_s) is often overlooked in modelling studies of landscape evolution, despite sediment playing a key role in the physical processes that drive erosion and sedimentation in river channels. Here, we show the direct impact of the supply of coarse-grained, hard sediment on the geometry of bedrock channels from the Rangitikei River, New Zealand. Channels receiving a coarse bedload sediment supply are systematically (up to an order of magnitude) wider than channels with no bedload sediment input for a given discharge. We also present physical model experiments of a bedrock river channel with a fixed water discharge (1.5 l min⁻¹) under different Q_s (between 0 and 20 g l⁻¹) that allow the quantification of the role of sediment in setting the width and slope of channels and the distribution of shear stress within channels. The addition of bedload sediment increases the width, slope and width-to-depth ratio of the channels, and increasing sediment loads promote emerging complexity in channel morphology and shear stress distributions. Channels with low Q_s are characterized by simple in-channel morphologies with a uniform distribution of shear stress within the channel while channels with high Q_s are characterized by dynamic channels with multiple active threads and a non-uniform distribution of shear stress. We compare bedrock channel geometries from the Rangitikei and the experiments to alluvial channels and demonstrate that the behaviour is similar, with a transition from single-thread and uniform channels to multiple threads occurring when bedload sediment is present. In the experimental bedrock channels, this threshold Q_s is when the input sediment supply exceeds the transport capacity of the channel. Caution is required when using the channel geometry to reconstruct past environmental conditions or to invert for tectonic uplift rates, because multiple configurations of channel geometry can exist for a given discharge, solely due to input Q_s. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

himu-em: The French Polynesian connection

himu, em i andem ii are three of the main geochemical mantle components that give rise to oceanic island basalts [1]. They represent the end members that produce the extreme isotopic compositions measured on intraplate volcanics. In French Polynesia, all three mantle components are represented in volcanic rocks. The characteristichimu signature is found in Tubuai, Mangaia and Rurutu,em i is present in the source of Rarotonga and Pitcairn volcanics andem ii dominates the composition of most Society Islands. Intermediate values between the three end members are found on most islands.We suggest that the three components are not independent but are physically related in the mantle. Thehimu component is thought to be recycled oceanic crust that lost part of its Pb through hydrothermal processes prior to and during subduction.em i andem ii are believed to acquire their isotopic and trace element characteristics through entrainment of sediments that were subducted together with the oceanic crust.The trace element pattern and the isotopic composition ofhimu lavas can be quantitatively modelled using a mixture of 25% old recycledmorb crust and 75% mantle peridotite. The extreme Pb composition is modelled assuming that Pb was lost from oceanic crust when hydrothermal alteration at the ridge leached Pb from the basalt to redeposit it as sulphides on top of and throughout the crust, followed by preferential dissolution of sulphides during dehydration in the subduction zone. These processes led to a drastic increase of theU/Pb ratio of the subducted material which evolved over 2 Ga to very radiogenic Pb isotopic compositions. Pb isotopic compositions similar to those ofem i andem ii are modelled assuming that sediments with average crustal Pb isotopic compositions were subducted and recycled into the mantle together with the underlyingmorb oceanic crust. Pelagic sediments (μ 5 andκ 6) account for the Pb isotopic composition ofem i whereas terrigenous sediments (μ 10 andκ 4.5) evolve towards theem ii end member. A few percent of sediment in the recycled crust-sediment mixture will destroy the characteristic Pb isotopic signature of thehimu component. This, together with the low probability of isolating oceanic crust in the mantle for 2 Ga, explains why the extremehimu composition, as seen on Tubuai and St Helena, is sampled so rarely by oceanic volcanism.     

Etude des Déformations et Inclinaisons du Sous-sol: Développements Instrumentaux et Applications dans la Région Sismique d’Arette,France

We present a modified version of a tilt and strain meter conceived to have great sensibility and good stability. These instruments were deployed in a cave at the seismic Pyrenean region of Arette (France). We set in evidence several types of phenomena, of which deformations brought about by water recharge filling up fissures on the massif are of importance. Owing to the redundance in the data, the study of the co-seismic deformations allows one to separate instrumental displacements and local readjustments from regional motions.     

A preliminary investigation of strong-motion data from the French Antilles

Strong-motion networks have been operating in the Caribbean region since the 1970s, however, until the mid-1990s only a few analogue stations were operational and the quantity of data recorded was very low. Since the mid-1990s, digital accelerometric networks have been established on islands within the region. At present there are thought to be about 160 stations operating in this region with a handful on Cuba, 65 on the French Antilles (mainly Guadeloupe and Martinique), eight on Jamaica, 78 on Puerto Rico (plus others on adjacent islands) and four on Trinidad.After briefly summarising the available data from the Caribbean islands, this article is mainly concerned with analysing the data that has been recorded by the networks operating on the French Antilles in terms of their distribution with respect to magnitude, source-to-site distance, focal depth and event type; site effects at certain stations; and also with respect to their predictability by ground motion estimation equations developed using data from different regions of the world. More than 300 good quality triaxial acceleration time-histories have been recorded on Guadeloupe and Martinique at a large number of stations from earthquakes with magnitudes larger than 4.8, however, most of the records are from considerable source-to-site distances. From the data available it is found that many of the commonly-used ground motion estimation equations for shallow crustal earthquakes poorly estimate the observed ground motions on the two islands; ground motions on Guadeloupe and Martinique have smaller amplitudes and are more variable than expected. This difference could be due to regional dependence of ground motions because of, for example, differing tectonics or crustal structures or because the ground motions so far recorded are, in general, from smaller earthquakes and greater distances than the range of applicability of the investigated equations.