Nitrogen uptake and denitrification in restored and unrestored streams in urban Maryland, USA

There is growing interest in rates of nitrate uptake and denitrification in restored streams to better understand the effects of restoration on nitrogen processing. This study quantified nitrate uptake in two restored and two unrestored streams in Baltimore, Maryland, USA using nitrate additions, denitrification enzyme assays, and a ¹⁵N isotope tracer addition in one of the urban restored streams, Minebank Run. Restoration included either incorporation of stormwater ponds below a storm drain and catch basins to attenuate flow or hydrologic “reconnection” of a stream channel to its floodplain. Stream restoration was conducted for restoring aging sanitary and bridge infrastructure and introducing some stormwater management in watersheds developed prior to current regulations. Denitrification potential in sediments was variable across streams, whereas nitrate uptake length appeared to be significantly correlated to surface water velocity, which was low in the restored streams during summer baseflow conditions. Uptake length of NO₃ ⁻–N in Minebank Run estimated by ¹⁵N tracer addition was 556 m. Whole stream denitrification rates in Minebank Run were 153 mg NO₃ ⁻–N m⁻² day⁻¹, and approximately 40% of the daily load of nitrate was estimated to be removed via denitrification over a distance of 220.5 m in a stream reach designed to be hydrologically “connected” to its floodplain. Increased hydrologic residence time in Minebank Run during baseflow likely influenced rates of whole stream denitrification, suggesting that hydrologic residence time may be a key factor influencing N uptake and denitrification. Restoration approaches that increase hydrologic “connectivity” with hyporheic sediments and increase hydrologic residence time may be useful for stimulating denitrification. More work is necessary, however, to examine changes in denitrification rates in restored streams across different seasons, variable N loads, and in response to the “flashy” hydrologic flow conditions during storms common in urban streams.     

The topography of Iapetus' leading side

We have used Cassini stereo images to study the topography of Iapetus' leading side. A terrain model derived at resolutions of 4-8 km reveals that Iapetus has substantial topography with heights in the range of −10 km to +13 km, much more than observed on the other middle-sized satellites of Saturn so far. Most of the topography is older than 4 Ga [Neukum, G., Wagner, R., Denk, T., Porco, C.C., 2005. Lunar Planet. Sci. XXXVI. Abstract 2034] which implies that Iapetus must have had a thick lithosphere early in its history to support this topography. Models of lithospheric deflection by topographic loads provide an estimate of the required elastic thickness in the range of 50-100 km. Iapetus' prominent equatorial ridge [Porco, C.C., and 34 colleagues, 2005. Science 307, 1237-1242] reaches widths of 70 km and heights of up to 13 km from their base within the modeled area. The morphology of the ridge suggests an endogenous origin rather than a formation by collisional accretion of a ring remnant [Ip, W.-H., 2006. Geophys. Res. Lett. 33, doi:10.1029/2005GL025386. L16203]. The transition from simple to complex central peak craters on Iapetus occurs at diameters of 11±3 km. The central peaks have pronounced conical shapes with flanking slopes of typically 11° and heights that can rise above the surrounding plains. Crater depths seem to be systematically lower on Iapetus than on similarly sized Rhea, which if true, may be related to more pronounced crater-wall slumping (which widens the craters) on Iapetus than on Rhea. There are seven large impact basins with complex morphologies including central peak massifs and terraced walls, the largest one reaches 800 km in diameter and has rim topography of up to 10 km. Generally, no rings are observed with the basins consistent with a thick lithosphere but still thin enough to allow for viscous relaxation of the basin floors, which is inferred from crater depth-to-diameter measurements. In particular, a 400-km basin shows up-domed floor topography which is suggestive of viscous relaxation. A model of complex crater formation with a viscoplastic (Bingham) rheology [Melosh, H.J., 1989. Impact Cratering. Oxford Univ. Press, New York] of the impact-shocked icy material provides an estimate of the effective cohesion/viscosity at . The local distribution of bright and dark material on the surface of Iapetus is largely controlled by topography and consistent with the dark material being a sublimation lag deposit originating from a bright icy substrate mixed with the dark components, but frost deposits are possible as well.     

Control of wind strength and frequency in the Aral Sea basin during the late Holocene

Changing content of detrital input in laminated sediments traced by XRF scanning and microfacies analyses reflect prominent variations in sedimentation processes in the Aral Sea. A high-resolution record of titanium from a core retrieved in the northwestern Large Aral Sea allows a continuous reconstruction of wind strength and frequency in western Central Asia for the past 1500 yr. During AD 450–700, AD 1210–1265, AD 1350–1750 and AD 1800–1975, detrital inputs (bearing titanium) are high, documenting an enhanced early spring atmospheric circulation associated with an increase in intensity of the Siberian High pressure system over Central Asia. In contrast, lower titanium content during AD 1750–1800 and AD 1980–1985 reflects a diminished influence of the Siberian High during early spring with a reduced atmospheric circulation. A moderate circulation characterizes the time period AD 700–1150. Unprecedented weakened atmospheric circulation over western Central Asia are inferred during ca. AD 1180–1210 and AD 1265–1310 with a considerable decrease in dust storm frequency, sedimentation rates, lamination thickness and detrital inputs (screened at 40-μm resolution). Our results are concurrent with changes in the intensity of the Siberian High during the past 1400 yr as reported in the GISP2 Ice Core from Greenland.     

Perennial frost blisters of the outer Mackenzie Delta,western Arctic coast,Canada

Saturated floodplains in Arctic deltas provide conditions favourable for frost mound growth. Little work has been reported from these settings to determine the origin of frost mounds and the controls on their distribution, to assess the longevity of individual mounds, or to quantify variation of mound distribution over time. A case study is presented on low mounds in low‐centred syngenetic ice‐wedge polygons of Big Lake Delta Plain, outer Mackenzie Delta. In 2008 and 2009, 12 mounds were examined by drilling to describe their morphologic variations and to investigate their growth processes. The mounds, containing a core of ice 15 to 58 cm thick, were less than 1 m high and 3 · 7 to 8 · 5 m in diameter; other mounds were over 10 m long. Organic inclusions in the ice, bubble densities, electrical conductivity profiles, and ice‐crystal structure indicated that the mounds were hydrostatic frost blisters. Up to six frost blisters were found within individual polygons due to the relatively small volume of water needed to create each mound. Frost‐blister densities, of greater than 1700 km^–2, increased toward the wet centres of alluvial islands down gentle topographic gradients. The frost blisters were perennial, with individuals remaining identifiable on aerial photographs and satellite images for up to 10 years. Frost blisters collapsed along dilation cracks opened by hydrostatic uplift and by thawing from their sides caused by snow drifting and water ponding. Cyclical growth and decay of the mounds may degrade the visible polygonal network over time. Copyright © 2013 John Wiley & Sons, Ltd.     

The marine and coastal access act—A hornets' nest?

The Marine and Coastal Access Act 2009 is now enacted into law. This paper looks at predictions made about new law by one of the authors, Peter Jones, in his paper The Marine Bill: Cornucopia or Pandora's Box [1] and assesses how successful the Act has been in turning aspirations into law. The paper focuses on the following areas: ecosystem protection, stakeholder engagement, marine spatial planning and the provision of a network of highly protected marine reserves, and raises concerns that the ecosystem approach has progressively been dropped in the drafting process of the legislation. Concerns are raised that the new Inshore Fisheries and Conservation Authorities have similar inherent conflicts of interest to those exhibited by Sea Fisheries Committees, which they sought to replace. The effectiveness of marine planning is questioned, as there appear to be inbuilt loopholes for public authorities to avoid complying with the marine plans. The draft marine policy statement (MPS), published in July 2010, includes appropriate environmental safeguards, but the MPS has not yet been formally adopted. The absence of a concrete target for highly protected marine reserves means there is a danger that designations under the Act may have little effect on the ground. In conclusion the Act provides some new mechanisms for marine protection, but arguably does not yet provide a framework for implementing the ecosystem approach and is not an end in itself.     

Eine Verbesserung von Alsops Methode zur Bestimmung der Reflexions- und Transmissionskoeffizienten von Oberflächenwellen

Zusammenfassung Die Methode von Alsop (1966) für den Durchgang von schräg einfallenden Oberflächenwellen durch eine vertikale Diskontinuität wird durch Verwendung eines neuen Funktionals, das auf der Diskontinuitätsfläche stationär sein soll, verbessert Das modifizierte Funktional hat die Dimension eines Energieflusses und wird durch diejenige Spannungs- und Verschiebungsdiskontinuität charakterisiert, die durch das Oberflächenwellenfeld auf der Diskontinuitätsfläche erzeugt wird. Modellrechnungen für SV-Wellen und Lovewellen zeigen, daß die neue Version von Alsoos Verfahren in jeder Hinsicht konsistentere Ergebnisse als die bisherige liefert.

---

An improvement of Alsop's method for the determination of reflection and transmission coefficients of surface waves

Summary Alsop's method (1966) for the non-normal passage of surface waves through a vertical discontinuity is improved by using a new functional to be made stationary on the plane of discontinuity. The modified functional has the dimension of an energy flux and is characterized by the discontinuous surface wave displacements and stresses on the vertical discontinuity. Model calculations which were carried out for SV-waves and Love waves show that the new version of Alsop's method yields in all respects more consistent results than the old one.

     

Thermally distinct craters near Hrad Vallis, Elysium Planitia, Mars

Evidence of volcano-ground ice interactions on Mars can provide important constraints on the timing and distribution of martian volcanic processes and climate characteristics. Northwest of the Elysium Rise is Hrad Vallis, a ∼370 m deep, 800 km long sinuous valley that begins in a source region at 34° N, 218° W. Flanking both sides of the source region is a lobate deposit that extends ∼50 km perpendicular from the source and is an average of ∼40 m thick. Previous studies have suggested the formation of the Hrad Vallis source region was the result of explosive magma-ice interaction and that the lobate deposit is a mudflow; here we use newly available MOLA, MOC, and THEMIS data to investigate the evidence supporting this hypothesis. Within the lobate deposit we have identified 12 craters with thermal infrared signatures and morphologies that are distinct from any other craters or depressions in the region. The thermally distinct craters are distinguished by their cool interiors surrounded by warm ejecta in the nighttime THEMIS IR data and warm interiors surrounded by cool ejecta in the daytime THEMIS IR data. The craters are typically 1100-1800 m in diameter (one crater is ∼2300 m across) and 30-40 m deep, but may be up to 70 m. The craters are typically circular and have central depressions (several with interior dune fill) surrounded by ∼1 to >6 concentric fracture sets. The distribution of the craters and their morphology suggests that they are likely the result of the interaction between a hot mudflow and ground ice.     

A determination of the composition of the Saturnian stratosphere using the IUE

We reduced ultraviolet spectra of Saturn from the IUE satellite to produce a geometric albedo of the planet from 1500 to 3000 Å. By matching computer models to the albedo we determined a chemical composition consistent with the data. This model includes C₂H₂ and C₂H₆ with mixing ratios and distributions of (9 ± 3) × 10^?8 in the top 20 mbar of the atmosphere with none below for C₂H₂ and (6 ± 1) × 10^?6 also in the top 20 mbar with none below for C₂H₆. The C₂H₂ and C₂H₆ distributions and the C₂H₆ mixing ratio are taken directly from the Voyager IRIS model [R. Courtin et al., Bull. Amer. Astron. Soc.13, 722 (1981), and private communication]. The Voyager IRIS model also includes PH₃, which is not consistent with the uv albedo from 1800 to 2400 Å. Our model requires a previously unidentified absorber to explain the albedo near 1600 Å. After considering several candidates, we find that the best fit to the data is obtained with H₂O, having a column density of (6 ± 1) × 10^?3 cm-am.     

Service contracts—An instrument of international logistics supply chain: Under United States and European Union regulatory frameworks

Service contracts have emerged as an important instrument to secure a long-term relationship between carriers in the container shipping industry and shippers requiring scheduled services covering a global market. This contract, entered into largely on an individual and confidential basis, continues to enjoy anti-trust immunity under current United States and European Union regulations. It will continue to be in place even after the EC Council Regulation 4056/86 is repealed in October 2008 although it may operate in a modified way because of the absence of the common external conference tariff. This article examines the implications of this instrument on the international supply chain and explores its future role in defining efficiencies in international trade flows.