Towards a climate event stratigraphy for New Zealand over the past 30 000 years (NZ‐INTIMATE project)

It is widely recognised that the acquisition of high‐resolution palaeoclimate records from southern mid‐latitude sites is essential for establishing a coherent picture of inter‐hemispheric climate change and for better understanding of the role of Antarctic climate dynamics in the global climate system. New Zealand is considered to be a sensitive monitor of climate change because it is one of a few sizeable landmasses in the Southern Hemisphere westerly circulation zone, a critical transition zone between subtropical and Antarctic influences. New Zealand has mountainous axial ranges that amplify the climate signals and, consequently, the environmental gradients are highly sensitive to subtle changes in atmospheric and oceanic conditions. Since 1995, INTIMATE has, through a series of international workshops, sought ways to improve procedures for establishing the precise ages of climate events, and to correlate them with high precision, for the last 30 000 calendar years. The NZ‐INTIMATE project commenced in late 2003, and has involved virtually the entire New Zealand palaeoclimate community. Its aim is to develop an event stratigraphy for the New Zealand region over the past 30 000 years, and to reconcile these events against the established climatostratigraphy of the last glacial cycle which has largely been developed from Northern Hemisphere records (e.g. Last Glacial Maximum (LGM), Termination I, Younger Dryas). An initial outcome of NZ‐INTIMATE has been the identification of a series of well‐dated, high‐resolution onshore and offshore proxy records from a variety of latitudes and elevations on a common calendar timescale from 30 000 cal. yr BP to the present day. High‐resolution records for the last glacial coldest period (LGCP) (including the LGM sensu stricto) and last glacial–interglacial transition (LGIT) from Auckland maars, Kaipo and Otamangakau wetlands on eastern and central North Island, marine core MD97‐2121 east of southern North Island, speleothems on northwest South Island, Okarito wetland on southwestern South Island, are presented. Discontinuous (fragmentary) records comprising compilations of glacial sequences, fluvial sequences, loess accumulation, and aeolian quartz accumulation in an andesitic terrain are described. Comparisons with ice‐core records from Antarctica (EPICA Dome C) and Greenland (GISP2) are discussed. A major advantage immediately evident from these records apart from the speleothem record, is that they are linked precisely by one or more tephra layers. Based on these New Zealand terrestrial and marine records, a reasonably coherent, regionally applicable, sequence of climatically linked stratigraphic events over the past 30 000 cal. yr is emerging. Three major climate events are recognised: (1) LGCP beginning at ca. 28 000 cal. yr BP, ending at Termination I, ca. 18 000 cal. yr BP, and including a warmer and more variable phase between ca. 27 000 and 21 000 cal. yr BP, (2) LGIT between ca. 18 000 and 11 600 cal. yr BP, including a Lateglacial warm period from ca. 14 800 to 13 500 cal. yr BP and a Lateglacial climate reversal between ca. 13 500 and 11 600 cal. yr BP, and (3) Holocene interglacial conditions, with two phases of greatest warmth between ca. 11 600 and 10 800 cal. yr BP and from ca. 6 800 to 6 500 cal. yr BP. Some key boundaries coincide with volcanic tephras. Copyright © 2007 John Wiley & Sons, Ltd.     

GNSS satellite transmit power and its impact on orbit determination

Antenna thrust is a small acceleration acting on Global Navigation Satellite System satellites caused by the transmission of radio navigation signals. Knowledge about the transmit power and the mass of the satellites is required for the computation of this effect. The actual transmit power can be obtained from measurements with a high-gain antenna and knowledge about the properties of the transmit and receive antennas as well as losses along the propagation path. Transmit power measurements for different types of GPS, GLONASS, Galileo, and BeiDou-2 satellites were taken with a 30-m dish antenna of the German Aerospace Center (DLR) located at its ground station in Weilheim. For GPS, total L-band transmit power levels of 50–240 W were obtained, 20–135 W for GLONASS, 95–265 W for Galileo, and 130–185 W for BeiDou-2. The transmit power differs usually only slightly for individual spacecraft within one satellite block. An exception are the GLONASS-M satellites where six subgroups with different transmit power levels could be identified. Considering the antenna thrust in precise orbit determination of GNSS satellites decreases the orbital radius by 1–27 mm depending on the transmit power, the satellite mass, and the orbital period.     

Estimation of unrecorded groundwater abstractions in Jordan through regional groundwater modelling

Jordan suffers from water scarcity and groundwater covers the majority of Jordan’s water supply. Therefore, there is an urgent need to manage this resource conscientiously. A regional numerical groundwater flow model, developed as part of a decision support system for the country of Jordan, allows for quantification of the overexploitation of groundwater resources and enables determination of the extent of unrecorded agricultural groundwater abstraction. Groundwater in Jordan is abstracted from three main aquifers partly separated by aquitards. With updated geological, structural, and hydrogeological data available in the country, a regional numerical groundwater flow model for the whole of Jordan and the southernmost part of Syria was developed using MODFLOW. It was first calibrated for a steady-state condition using data from the 1960s, when groundwater abstraction was negligible. After transient calibration using groundwater level measurements from all aquifers, model results reproduce the large groundwater-level declines experienced in the last decades, which have led to the drying out of numerous springs. They show a reversal of groundwater flow directions in some regions, due to over-abstraction, and demonstrate that documented abstractions are not sufficient to cause the observed groundwater-level decline. Only after considering irrigation water demand derived from remote sensing data, the model is able to simulate these declines. Illegal abstractions can be quantified and predictive scenarios show the potential impact of different management strategies on future groundwater resources.

     

格陵兰岛西南部Nassaq地区辉钼矿Re-Os年龄及意义

格陵兰矿产资源丰富,种类繁多,目前已探明的金属矿点(床)有800多个,具有巨大的找矿潜力,世界主要矿业公司多数对格陵兰的找矿与开发表现出积极态度。因此,选择典型地区开展深入研究对进一步找矿有重要的理论指导意义。格陵兰西南部的那萨克(Nassaq)地区交通较为便利,本文在对该地区系统的野外地质特征研究基础上,采集了含辉钼矿斜长角闪岩样品,并从中选择代表性样品,进行辉钼矿Re-Os年代学研究,为其成矿作用及相关问题的研究提供基本依据。该地区辉钼矿的形成年龄为2553 Ma,为新太古界末期的产物,其矿化是Qorqut花岗岩侵入时(2550Ma)所形成,在格陵兰西南部应重视Qorqut花岗岩有关的辉钼矿的找矿与评价工作。     

http://www.sciencedirect.com/science/article/pii/S167498711400108X

We present three 3D numerical models of deep subduction where buoyant material from an oceanic plateau and a plume interact with the overriding plate to assess the influence on subduction dynamics,trench geometry,and mechanisms for plateau accretion and continental growth.Transient instabilities of the convergent margin are produced,resulting in:contorted trench geometry;trench migration parallel with the plate margin;folding of the subducting slab and orocline development at the convergent margin;and transfer of the plateau to the overriding plate.The presence of plume material beneath the oceanic plateau causes flat subduction above the plume,resulting in a "bowed" shaped subducting slab.In plateau-only models,plateau accretion at the edge of the overriding plate results in trench migration around the edge of the plateau before subduction is re-established directly behind the trailing edge of the plateau.The plateau shortens and some plateau material subducts.The presence of buoyant plume material beneath the oceanic plateau has a profound influence on the behaviour of the convergent margin.In the plateau + plume model,plateau accretion causes rapid trench advance.Plate convergence is accommodated by shearing at the base of the plateau and shortening in the overriding plate.The trench migrates around the edge of the plateau and subduction is re-established well behind the trailing edge of the plateau,effectively embedding the plateau into the overriding plate.A slab window forms beneath the accreted plateau and plume material is transferred from the subducting plate to the overriding plate through the window.In all of the models,the subduction zone maintains a relatively stable configuration away from the buoyancy anomalies within the downgoing plate.The models provide a dynamic context for plateau and plume accretion in Phanerozoic accretionary orogenic systems such as the East China Orogen and the Central Asian Orogen(Altiads),which are characterised by accreted ophiolite complexes with diverse geochemical affinities,and a protracted evolution of accretion of exotic terranes including oceanic plateau and terranes with plume origins.     

Evaluation of stress strain non-uniformities in the laboratory direct simple shear test specimens using 3D discrete element analysis

The direct simple shear (DSS) device is one of the commonly used laboratory element testing tools to characterize the shear behaviour of soil. The interpretation of results from an element test requires understanding of the degree of stress and strain non-uniformities in a given test specimen. So far, studies on stress and strain non-uniformities in the DSS test have been conducted using direct boundary measurements of stresses in laboratory specimens supported by a continuum based analytical approach. Discrete element modelling now provides a means of modelling the soil behaviour in a realistic manner using a particulate approach. Accordingly, the performance of a DSS specimen was modelled using discrete element modelling with emphasis on assessing stress and strain non-uniformities in the specimen during shearing. The approach allowed for the numerical determination of stresses not only at the boundaries, but also within the DSS specimen. It was shown that mobilised stress ratio distribution throughout the shearing phase for the majority of specimen volume at locations near the central planes parallel and perpendicular to the direction of shearing is fairly uniform. Finally, it was noted that the potential for particle slippage at locations near the specimen centre can result in non-uniform shear strain distributions.     

Non‐unique stratal geometries: implications for sequence stratigraphic interpretations

There is now strong evidence that stratal geometries on basin margins are most likely a consequence of multiple controls, not just variations in accommodation. Consequently, correct sequence stratigraphic interpretation of stratal geometries requires an understanding of how multiple different controls may generate similar geometries. Using a simple numerical stratigraphic forward model, we explore the impact of time variable sediment supply and different sediment transport rates on stratal geometries. We demonstrate how four common types of stratal geometry can form by more than one set of controlling parameter values and are thus likely to be non‐unique, meaning that there may be several sets of controlling factors that can plausibly explain their formation. For example, a maximum transgressive surface can occur in the model due to an increase in rate of relative sea‐level rise during constant sediment supply, and due to a reduction in rate of sediment supply during a constant rate of relative sea‐level rise. Sequence boundaries, topset aggradation and shoreline trajectories are also examples of non‐unique stratal geometries. If the model simulations in this work are sufficiently realistic, then the modelled stratal geometries are important examples of non‐uniqueness, suggesting the need for a shift towards sequence stratigraphic methods based on constructing and evaluating multiple hypotheses and scenarios.