Tackling social exclusion in European neighbourhoods: experiences and lessons from the NEHOM project

Disadvantaged urban neighbourhoods with their complex social, economic and physical situations have increasingly become the focus of governmental policies in the EU. The emphasis has shifted from improving physical qualities to building opportunities for social groups in these areas. While physical upgrade is easier to achieve, at least in the short run, initiatives often fail in outcomes on communities and local participation. This paper aims to improve understanding on how to tackle area-based social exclusion and create socially coherent communities. Building on the results of the NEHOM project, the focus is on examining how various interventions have impacted local communities and their opportunities for better inclusion. A comparison between neighbourhoods shows that mixing social groups to a certain degree is likely to be a necessary step towards opening long-term opportunities for a disadvantaged neighbourhood. The planned initiatives should at the same time directly benefit local communities, and the involvement of local groups in the planning and implementation process helps to guarantee that the overall changes are accepted by the local community. However, the proposed guidelines do not provide a universal recipe for a successful renewal suiting each neighbourhood—the contextual matters should always be a starting point when planning an initiative.     

Formation of iron-containing colloids by the weathering of phyllite

The formation of colloids during the weathering of phyllite was investigated by exposing ground phyllite to Milli-Q water. Secondary mineral colloids of 10¹–10² nm were detected in significant concentrations. At pH of about 8.5, the solution concentration of these colloids reached up to 10 mg/L (however, acidification to pH 4.0 prevented the formation of the colloids). The mineralogical composition of the secondary mineral colloids is assumed to be a mixture of ferrihydrite, manganese oxyhydroxides, aluminosilicates, amorphous Al(OH)₃ and gibbsite with possible additions of iron silicates and␣iron-alumino silicates. The colloids were stable over longer periods of time (at least several weeks), even in the presence of suspended ground rock. Direct formation of iron-containing secondary mineral colloids at the rock–water interface by the weathering of rock material is an alternative to the well-known mechanism of iron colloid formation in the bulk of water bodies by mixing of different waters or by aeration of anoxic waters. This direct mechanism is of relevance for colloid production during the weathering of freshly crushed rock in the unsaturated zone as for instance crushed rock in mine waste rock piles. Colloids produced by this mechanism, too, can influence the transport of contaminants such as actinides because these colloids have a large specific surface area and a high sorption affinity.     

Dissolved Trace Metal–Organic Complexes in the Lot–Garonne River System Determined Using the C18 Sep-Pak System

An 11-month observation of dissolved and particulate organic matter, chlorophyll a(Chl a), C18 Sep-Pak extractable hydrophobic dissolved organic matter (hDOM) fraction and associated dissolved trace metals (Cd, Cu, V, Co, Ni, Mo, U) was performed in the Lot–Garonne River system. This system includes the Riou Mort, the Lot River and the downstream reaches of the Garonne River and represents the fluvial transport path of trace metals between the major point source of polymetallic pollution, located in the Riou Mort watershed and the Gironde estuary. Spatial and temporal variations of dissolved and particulate organic carbon and Chl areflect the presence of different types of organic matter and their relation with the hDOM fraction. Maximum Chl a/POC ratios (up to 0.03), indicate intense phytoplankton production from March to May. In the Lot River (Temple), DOC and POC concentrations were clearly higher and mean Chl a concentration (2.8 mg g⁻¹) was about three times higher than those of the other sites. High Chl a/POC ratios suggest high phytoplankton activity with maxima in spring and late summer. In the Riou Mort River, very high POC concentrations of up to 40 (mean: 20) occurred, whereas Chl a concentrations were relatively low indicating low phytoplankton activity. High, strongly variable DOC and POC concentrations suggest important natural (Carboniferous soils, forests) or anthropogenic (e.g., former coal mines, waste areas, agriculture, sewage) carbon sources within the small Riou Mort watershed. Despite high DOC concentrations in the Riou Mort River, hDOM metal fractions were generally lower than those at the other sites. The general order of decreasing binding strength between metals and the organic hydrophobic phase (Cu, U > Co, Ni > V, Mo > Cd) at all four sites was in good agreement with the Irving–William series of transition element affinity towards organic ligands. Accordingly, the role of the hydrophobic phase in dissolved Cd transport appeared to be negligible, whereas the hDOM–Cu fraction strongly contributed to dissolved Cu transport.     

Semi-Analytic Modelling of Subsidence

This paper presents a forward model for subsidence prediction caused by extraction of hydrocarbons. The model uses combinations of analytic solutions to the visco-elastic equations, which approximate the boundary conditions. There are only a few unknown parameters to be estimated, and, consequently, calculations are very fast. The semi-analytic model is applicable to a uniform and layer-cake stratigraphy, with visco-elastic parameters changing per layer, and an arbitrary depletion pattern. By its capabilities to handle a multi-layered visco-elastic subsurface, the semi-analytic model fills the gap between the analytic single-layered elastic models available to date and the more elaborate numerical, e.g. finite element, models.     

Space-Time Intelligence Systems: Technology, applications and methods

Geographic Information System (GIS) software is constrained, to a greater or lesser extent, by a static world view that is not well-suited to the representation of time (Goodchild 2000). Space Time Intelligence System (STIS) software holds the promise of relaxing some of the technological constraints of spatial only GIS, making possible visualization approaches and analysis methods that are appropriate for temporally dynamic geospatial data. This special issue of the Journal of Geographical Systems describes some recent advances in STIS technology and methods, with an emphasis on applications in public health and spatial epidemiology.The STIS expert workshops were funded in part by grants R01CA092669 and R01CA096002 from the National Cancer Institute, and by grants R43-ES010220 and R44-ES010220 from the National Institute of Environmental Health Sciences. Gillian AvRuskin provided cheerful editorial assistance. We thank the participants at the workshops for providing invaluable expertise and critical insights.     

Observations And Modelling Of The On-Ice And Off-Ice Air Flow Over The Northern Baltic Sea

Two cases of on-ice and off-ice air flow characterizing the opposite weather situations over the ice-edge zone in the northern Baltic Sea are analysed on the basis of aircraft observations, and modelled using atwo-dimensional mesoscale model. The stable boundary layer (SBL) during theon-ice flow exhibited little thermal modification, but a low-level jet (LLJ) was generated at the 250-m high top of the SBL. In the model, the LLJ was associated with inertial oscillations in space, while the baroclinicity explained the shape of the wind profile well above the SBL. Although the observed LLJ was most pronounced over the ice, the modelling suggests that it was not generated by the ice edge but by the coastline some 400 km upwind of the ice edge, where a much more drastic change in the thermal stratification and surface roughness took place. The generation, maintenance, and strength of the LLJ were very sensitive to the parameterization of turbulent mixing in the SBL. In the case of the off-ice flow, the modification of the air mass and the development of a convective boundary layer (CBL) both over the ice and open sea were reasonably well modelled. Sensitivity runs suggested that it was essential to take into account the effects of subgrid-scale leads, a forest in the archipelago (which was crossed by the air flow), and water vapour condensationinto ice crystals. The heat flux from leads was particularly important for the heatbudget of the CBL, and the observed growth of the CBL was partly due to theeffective mixing over the rough and relatively warm forest.     

Impact of the North Atlantic Oscillation on Middle Eastern Climate and Streamflow

Interannual to decadal variations in Middle Eastern temperature, precipitationand streamflow reflect the far-field influence of the North Atlantic Oscillation (NAO), a dominant mode of Atlantic sector climate variability. Using a new sea surface temperature (SST) based index of the NAO and availablestreamflow data from five Middle Eastern rivers, we show that the first principal component of December through March streamflow variability reflects changes in the NAO. However, Middle East rivers have two primary flooding periods.The first is rainfall-driven runoff from December through March, regulated on interannual to decadal timescales by the NAO as reflected in local precipitation and temperature.The second period, from April through June, reflects spring snowmelt and contributes in excess of 50% of annual runoff.This period, known locally as the khamsin, displays no significantNAO connections and a less direct relationship with local climatic factors, suggesting that streamflow variability during this period reflects land-cover change, possibly related to agriculture and hydropower generation, and snowmelt.     

Geochemistry and Rb–Sr geochronology of a ductile shear zone in the Orlica-Śnieżnik dome (West Sudetes, Poland)

Amphibolite-facies orthogneisses of the Orlica-vnie™nik dome in the West Sudetes (Poland) show a local continuous transition from weakly deformed augen gneisses to finely laminated mylonites. Field evidence indicates that ductile shearing developed pre- or syntectonically to a migmatization event. Bulk-rock compositions of variably deformed samples yield no indications for deformation- and/or fluid-enhanced element mobility and redistribution. ⁸⁷Rb-⁸⁶Sr geochronology (biotite, phengite, whole rock) places time constraints on the deformation process and the post-orogenic cooling history. Phengite- and biotite-whole-rock pairs yield Rb-Sr ages of 340 to 334 Ma and 335 to 294 Ma, respectively, independent of the degree of deformation. The weighted mean of phengite-whole-rock pairs indicates an age of 337.4DŽ.3 Ma. Combining most of the biotite-whole-rock data yields a weighted mean age of 328.6dž.4 Ma. Because of their different closure temperatures for the Rb-Sr system, these differences are interpreted to date cooling after a thermal event. Direct dating of the deformation is not possible, but the cooling history record defines a minimum age for the development of ductile shearing and the last migmatization event. These time constraints provide evidence for the initiation of crustal collapse during or immediately following peak metamorphic conditions. The results of this study further document the importance of Variscan metamorphism in the Orlica-vnie™nik dome.     

Facies partitioning and sequence stratigraphy of cool-water, mixed carbonate-siliciclastic sediments (Upper Miocene Guadalquivir Domain, southern Spain)

During the late Miocene, the Guadalquivir Basin and its satellite basin, the Ronda Basin, were under Atlantic cool-water influence. The aim of our study is to develop a sequence stratigraphic subdivision of the Ronda Basin fill and to provide models for the cool-water carbonates. The Upper Miocene of the Ronda Basin can be divided into three depositional sequences. Sequence 1 is early Tortonian, Sequence 2 late Tortonian to earliest Messinian, and Sequence 3 Messinian in age. The sediments were deposited in a ramp depositional system. Sequence 1 is dominated by conglomerates and marls. In Sequence 2 and Sequence 3, carbonate deposits dominate in the inner ramp whereas siliciclastics preferentially occur in the middle and outer ramp. Bryomol carbonate sediments occur in all sequences whereas rhodalgal carbonates are restricted to Sequence 3. In bays protected from siliciclastic influx, rhodalgal deposits formed under transgressive conditions. A bryomol factory occurs in zones of continuous siliciclastic supply. This distribution results from facies partitioning during the flooding of the Ronda Basin, which has a rugged and irregular relief. Embayments were protected from siliciclastic influx and provided regions with less hydraulic energy.