Mid-holocene climate change in Lake Bosumtwi, Ghana

Lake Bosumtwi is one of the most widely studied palaeoclimate archives in West Africa. Results from numerous AMS ¹⁴C dates of samples from four piston cores from Lake Bosumtwi show that an abrupt sedimentary transition from a mid-Holocene sapropel to calcareous laminated muds occurred at about 3200 cal yr B.P. High-resolution analyses of the nitrogen isotopic composition of organic matter across this transition confirm its abrupt nature, and suggest that the change may signal a step toward increased aridity and intensified surface winds that affected western equatorial Africa from Ghana to the Congo basin. Northern and Eastern Africa experienced a similar abrupt shift toward aridity during the late Holocene, but at about 5000 cal yr B.P., a difference in timing that illustrates the regional nature of climate changes during the Holocene and the importance of feedback mechanisms in regulating Holocene climate variability. Furthermore, an abrupt change at about 3000 cal yr B.P. occurs at several sites adjacent to the tropical and subtropical Atlantic, which may hint at major changes in the surface temperatures of the tropical Atlantic and/or Pacific at this time.     

High latitude river runoff in a doubled CO2 climate

A global atmospheric model is used to calculate the monthly river flow for nine of the world's major high latitude rivers for the present climate and for a doubled CO₂ climate. The model has a horizontal resolution of 4° × 5°, but the model's runoff from each grid box is quartered and added to the appropriate river drainage basin on a 2° × 2.5° resolution. A routing scheme is used to move runoff from a grid box to its neighboring downstream grid box and ultimately to the mouth of the river. In a model simulation in which atmospheric carbon dioxide is doubled, mean annual precipitation and river flow increase for all of these rivers, increased outflow at the river mouths begins earlier in the spring, and the maximum outflow occurs approximately one month sooner due to an earlier snow melt season. In the doubled CO₂ climate, snow mass decreases for the Yukon and Mackenzie rivers in North America and for rivers in northwestern Asia, but snow mass increases for rivers in northeastern Asia.     

Physical,chemical, and biological conditions associated with the early stages of the Lake Michigan vernal thermal front

An investigation of the thermal front in southeastern Lake Michigan during April 1988 revealed a dynamic physical, chemical, and biological environment. The front was observed approximately 4 km from the coast as a distinct gradient separating cold open-lake waters from warmer nearshore waters. Surface isotherms near the front were generally parallel to one another but skewed with respect to shore. Comparison between April 22 and 29 showed that the surface isothern pattern was modulated by wind stress. The pattern from April 29 showed signs of flow instabilities with horizontal scales of 1 km to 5 km. Surface drifter trajectories provided estimates of horizontal convergence at the fron which varied from 7×10^?6 s^?1 to 20×10^?6 s^?1. Inferred rates of downwelling, which ranged from 9.5 m d^?1 to 20.7 m d^?1, were sufficient to move a water parcel from the surface to the bottom in 2 to 6 d at the front. Convergent circulation was observed on both sampling dates despite contrasts in wind stress. Concentrations of chloride, soluble silica, and chlorophyll, which were always higher inshore, were 5% to 82% larger than offshore mean values. The aquatic environment just inshore of the thermal front was characterized by chlorphyll concentrations which exceeded 5.0 μg 1^?1 while concentrations offshore were between 1.0 μg 1^?1 and 2.0 μg 1^?1. A relatively uniform vertical structure in chlorophyll concentrations in the frontal zone was consistent with the observed convergence and inferred downwelling near the front.     

Using distributed temperature sensing (DTS) technology in acid gas injection design

The use of slickline distributed temperature sensing (SL-DTS) technology is becoming widespread due to its ease of operation and ability to acquire real-time multiple temperature traces inside the wellbore. Injection of treated acid gas (TAG)—a mixture of CO₂ and H₂S—into geologic formations has become an attractive technical and economic option for oil and gas producers and processors who are faced with regulations concerning excess sulfur and greenhouse gas emissions. Acid gas injection (AGI) into geologic formations is more economical and more flexible in dealing with varying TAG compositions than sulfur recovery units (SRUs) using the Claus process. SRUs do not achieve air quality standards and have high operation and maintenance costs. In addition, there is low demand for sulfur and sulfur disposal costs are high. The results of the analysis of SL-DTS data acquired in conjunction with step rate and pressure falloff (PFO) tests are presented in this paper. These tests were conducted to evaluate the injection potential of geologic formations. The injection zone consisted of a carbonate formation characterized by Karst features, vugs, and natural fractures. The SL-DTS data during the initial injection flow rate for the step rate test (SRT) indicated that high permeability zones accepted fluid at lower injection rates. An increasing number of discrete zones began to accept fluid as the injection rate was increased. The results of the SRT provided the fracture pressure of the formation. This information was used to design an AGI program that would avoid fracturing the formation while allowing for the required volume of TAG to be injected. The results of the PFO test provided information on the reservoir pressure and permeability and also indicated the presence of one or more hydraulic fractures. This case study of SL-DTS measurements made during a SRT and a PFO test for the design of an AGI well provides valuable insights into the potential of DTS technology and its use in AGI and carbon capture/sequestration (CCS) operations. Its findings could be applied to analyze injection potential of geological formations not only for AGI projects but also for CCS, and CO₂ enhanced oil recovery opportunities.     

Regional ash fall hazard II: Asia-Pacific modelling results and implications

In a companion paper (this volume), the authors propose a methodology for assessing ash fall hazard on a regional scale. In this study, the methodology is applied to the Asia-Pacific region, determining the hazard from 190 volcanoes to over one million square kilometre of urban area. Ash fall hazard is quantified for each square kilometre grid cell of urban area in terms of the annual exceedance probability (AEP), and its inverse, the average recurrence interval (ARI), for ash falls exceeding 1, 10 and 100?mm. A surrogate risk variable, the Population-Weighted Hazard Score: the product of AEP and population density, approximates the relative risk for each grid cell. Within the Asia-Pacific region, urban areas in Indonesia are found to have the highest levels of hazard and risk, while Australia has the lowest. A clear demarcation emerges between the hazard in countries close to and farther from major subduction plate boundaries, with the latter having ARIs at least 2 orders of magnitude longer for the same thickness thresholds. Countries with no volcanoes, such as North Korea and Malaysia, also face ash falls from volcanoes in neighbouring countries. Ash falls exceeding 1?mm are expected to affect more than one million people living in urban areas within the study region; in Indonesia, Japan and the Philippines, this situation could occur with ARIs less than 40?years.     

Control‐volume mixed finite element methods

A key ingredient in simulation of flow in porous media is accurate determination of the velocities that drive the flow. Large‐scale irregularities of the geology (faults, fractures, and layers) suggest the use of irregular grids in simulation. This paper presents a control‐volume mixed finite element method that provides a simple, systematic, easily implemented procedure for obtaining accurate velocity approximations on irregular (i.e., distorted logically rectangular) block‐centered quadrilateral grids. The control‐volume formulation of Darcy’s law can be viewed as a discretization into element‐sized “tanks” with imposed pressures at the ends, giving a local discrete Darcy law analogous to the block‐by‐block conservation in the usual mixed discretization of the mass‐conservation equation. Numerical results in two dimensions show second‐order convergence in the velocity, even with discontinuous anisotropic permeability on an irregular grid. The method extends readily to three dimensions.     

Gelification of victorian tertiary soft brown coal wood. II. Changes in chemical structure associated with variation in the degree of gelification

The gross chemical structures of xylites and gelified soft brown coal woods, Latrobe Valley, Victoria, Australia, as determined by solid state nuclear magnetic resonance spectroscopy, are compared with those of present-day wood-derived materials prepared from an angiosperm, Eucalyptus regnans, and a gymnosperm (conifer), Pinus radiata. Also examined are the changes in the gross chemical structures of soft brown coal woods with increase in their degree of gelification and the relationship between these changes and variations in their chemical composition and microscopic appearance.The Victorian xylites exhibit greater affinities with the present-day gymnosperm than the present-day angiosperm. The progressive removal of cellulose with increasing degree of gelification can be equated with an increase in huminite reflectance, elimination of humotelinite autofluorescence and changes in the relative proportions of the humotelinite submacerals. The lignin structure of xylite is also modified during the gelification process, including the progressive loss of methoxyl groups and evidence of minor oxidation.     

March 1990 Hailstorm Damage in Sydney,Australia

On 18 March 1990, an intense hailstorm in Sydney, New South Wales, Australia caused insured damage valued at A$million – the third most expensive loss event in Australian insurance history.While damage was widespread with claims for buildings spread across more than 130 postcodes, 20% of the claims came from just two postcodes. The proportion of dwellings of brick construction that made a claim was significantly less than the proportion of policies for this type of construction. Fibro (fibre-cement), timber and aluminium-clad dwellings are more likely to sustain damage than brick buildings in this type of storm.Hail caused the majority of damage to exterior building items while water damage more commonly affected interior building items and contents. While the repair of Interior building items such as ceilings and walls cost more than contents damage on average, the repair/replacement costs of contents contributed more to the total costs. Damage to window glass and roofs together made up more than 50% of the total claim.     

The red bed controversy revisited: shape analysis of Colorado Plateau units suggests long magnetization times

Several Triassic and earliest Jurassic sedimentary units from the Colorado Plateau region have distributions of virtual geomagnetic poles (VGPs) that are highly elongate along the path of apparent polar wander (APW). This suggests that the remanent magnetizations measured in these units were acquired over an extended period of time, possibly approaching 35 m.y., and are not precisely coeval with the stratigraphic age of the rock. Comparison with other paleomagnetic studies shows that the observed elongation is not a general attribute of the age of the rock, nor is it related to paleolatitude. The rocks that yield elongate VGP distributions are dominantly red to brown mudstones, and it is possible that their remanence is dominated by a slowly acquired chemical remanent magnetization, as suggested by Larson et al. [J. Geophys. Res. 87 (1982) 1081] and other authors. However, several superficially similar units from the Colorado Plateau have nearly circular VGP distributions. The process by which remanence is acquired in clastic sedimentary rocks merits further study.