Investigation of heavy metal uptake by three types of ornamental plants as affected by application of organic and chemical fertilizers in contaminated soils

Accumulation of heavy metals in soil media is considered as a serious environmental problem, which is hazardous to human and animal health. There have been several methods for the removal of these toxic metals. One of the commonly used methods is the use of plants, especially ornamental plants to remove heavy metals from soils. In this regard, the study has been conducted on the soils contaminated with Mn, Pb, Ni, and Cd using factorial experiment in a completely randomized design with two factors including three types of soil (soil A for the highest level of contamination, B for the lowest level of pollution, and C for the non-contaminated soil) with different contamination levels as well as three types of ornamental plants, gladiolus, daffodils, and narcissus with four replications. In another part of the study, soil A and gladiolus were used in a completely randomized design with three replications, and also three types of fertilizers, such as municipal solid waste compost, triple superphosphate and diammonium phosphate, were added to this soil. In addition, the availability of heavy metal was studied in gladiolus as influenced by the application of organic and chemical fertilizers. The results showed that heavy metal pollution caused reduction in the dry weight of gladiolus and tulips compared to the control sample, while there was no significant effect of pollution on the dry weight of narcissus. The uptake of Mn, Pb, Ni, and Cd by all three plants has been increased with enhancing the pollution levels of heavy metals. The highest concentration of Pb in the shoots of plants was observed in soil A with an average amount of 61.16 (mg kg^?1), which revealed a substantial difference relative to the treatment of soil B and C. The most and least amount of Ni in the plants shoots were related to soil A and soil C with an average of 2.35 and 0.89 mg kg^?1, respectively. The uptake of Pb by shoots of all three plants was nearly similar to each other, while more Pb was absorbed by the bulbs of gladiolus compared to the bulbs of other plants. Increment in the pollution levels led to the decrement in enrichment factor (EF); however, there was no effect of pollution levels on EF of Mn and Pb. Moreover, there was no effect of increasing pollution levels on translocation factor of these elements. In gladiolus, after application of organic and chemical fertilizers, it was observed that the concentration of heavy metals was far more in the bulbs compared to the shoots. In conclusion, the cultivation of these ornamental plants is highly recommended due to not only their decorative aspect but also their ability for bioremediation as well as being economical.     

The Starzach site in Southern Germany: a site with naturally occurring CO<Subscript>2</Subscript> emissions recovering from century-long gas mining as a natural analog for a leaking CCS reservoir

In this paper, we present the Starzach site, a region featuring numerous natural CO₂ emission spots, such as mofettes, that reappeared after a longer period of extensive industrial CO₂ mining. We discuss the results of a detailed literature study on the geological setting and the activities related to the gas mining in combination with own measurements to introduce the site as an example on how gas leakage from an insecure CCS reservoir could manifest at the surface. The site is in particular interesting for such investigations as the CO₂ emissions started to replenish after the end of the CO₂ mining and offers the unique possibility to investigate an increase in degassing activity as it might be expected for an active CCS site where leakage is suspected. Based on the geological setting and soil, gas emission, and isotope investigations, we further discuss the source of the CO₂ emission and the gas ascent to the ground surface via deep-reaching faults, latter being so far excluded by previous work. The combination of our extensive literature review and recent field investigations allowed us to draw new geological conclusions for the site that were under discussion for a long time and to give insight into the site’s potential for CCS-related analog studies in the future.     

Comparative study for environmental performances of traditional manufacturing and directed energy deposition processes

Additive manufacturing is considered more sustainable than traditional manufacturing due to its efficient energy and materials usage. However, previous literature indicates that this suggestion is applicable only for the polymer materials, and the environmental issues of additive manufacturing with metallic materials are still not clear. With the method of life cycle assessment, this paper analyzes and compares the energy consumptions and environmental impacts of direct energy deposition and traditional machining processes for a typical metal part. Further, the article attempts to identify the significant issues in the two manufacturing options that contribute most to the environmental impacts. Six environmental impacts were assessed in this study: global warming potential (GWP); acidification potential (AP); eutrophication potential; ozone depletion potential (ODP); photochemical ozone creation potential (POCP); and abiotic depletion potential (ADP). The results show that the gear laser fabrication process consumes more energy and releases more negative emissions compared with traditional gear manufacturing processes. The results of GWP, AP, ODP, ADP and POCP of the traditional gear manufacturing are only 30.33, 43.42, 17, 65.05 and 54.68% of the gear laser fabrication.     

Interactive effect of cadmium and zinc on chromium uptake in spinach grown in Vertisol of Central India

A pot culture experiment was conducted to study impact and interaction of multi-metals on growth, yield and metals uptake by spinach (variety All Green). Three levels of each chromium (0, 50 and 100 mg/kg), cadmium (0, 1 and 2 mg/kg) and zinc (0, 10 and 20 mg/kg) in combinations (total treatments 3 × 3 × 3 = 27) were applied in a Vertisol (5 kg). The results showed that increasing the concentration of chromium, cadmium and zinc in soil enhanced the respective metal concentrations in spinach root and shoot. When cadmium at 2 mg/kg along with chromium at 100 mg/kg soil was applied, chromium concentration and uptake were decreased in root and shoot. Meanwhile, zinc application had no significant effect on chromium uptake and concentration in spinach biomass. From the results, it was concluded that cadmium at higher dose had an antagonistic effect over chromium. On the other hand, in chromium, cadmium and zinc combinations particularly at their higher levels, a competition among each other was found. Therefore, the findings could be used as guidelines for controlling and management of heavy metals pollution in farmland.     

Climate variability/change and attitude to adaptation technologies: a pilot study among selected rural farmers’ communities in Nigeria

Understanding climate variability and change is essential for designing adaptation policies and strategies to deal with the impacts of climate change on the agricultural sector. This Paper aims at assessing climate variability/change, the perception of rural farmers on climate change and preferred  adaptation strategies among the farmers in some selected farming communities in Nigeria. The study thus used both meteorology data and social survey, to examine variability/change in climate and factors determining the adaptation techniques adopts by rural farmers. The results show a relatively uniform temperatures and some seasonal variations in recent years (diurnal range of temperature is about 10 °C) but the rainfall shows much more seasonal variations. The rainfall has relatively undeviating trend from 1981 to 1996 but the trend appears to be upwards from the year 1997 to 2010. About 72.8% participants responded in the affirmative that climate is changing but there appears to be a significant relationship between the length of farming experiences and farmers’ perceptions of climate change adaptation techniques. Water-related (about 53%) and nutrient related (about 52%) technologies appear to have a high preference among the farmers. The major driver that determines farmers’ preference for climate change adaptation techniques is their incomes and experiences.     

An agent-based evacuation model for the 2011 Brisbane City-scale riverine flood

In this study, an agent-based model is proposed in order to provide new insights into the policy analysis and strategy assessment of city-scale evacuation management. The proposed model is suitable for assessment of the influence of different departure times and communications among peer evacuees on the number of residents at risk who arrive at official shelters. A case study is applied to build a simulation model for the coastal city of Brisbane in Australia. The Brisbane River catchment experiences regular flooding almost every year; the second severest flood since the twentieth century occurred in 2011. During that event, over 15,000 properties were inundated and around 3600 households evacuated in metropolitan Brisbane alone. Making use of high-performance computing clusters, the evacuation simulation was coupled with results from a validated hydrodynamic model to test a variety of escaping scenarios based on the 2011 flood situation. This case study demonstrates the proposed model’s capacity to represent the dynamic evacuation process and also shows that the model is able to help develop flood emergency plans and evaluate response measures through exploring key elements in a range of scenarios.     

Three-dimensional numerical and analytical study of horizontal group of square anchor plates in sand

In this paper, numerical and analytical methods are used to evaluate the ultimate pullout capacity of a group of square anchor plates in row or square configurations, installed horizontally in dense sand. The elasto-plastic numerical study of square anchor plates is carried out using three-dimensional finite element analysis. The soil is modeled by an elasto-plastic model with a Mohr–Coulomb yield criterion. An analytical method based on a simplified three-dimensional failure mechanism is developed in this study. The interference effect is evaluated by group efficiency η, defined as the ratio of the ultimate pullout capacity of group of N anchor plates to that of a single isolated plate multiplied by number of plates. The variation of the group efficiency η was computed with respect to change in the spacing between plates. Results of the analyses show that the spacing between the plates, the internal friction angle of soil and the installation depth are the most important parameters influencing the group efficiency. New equations are developed in this study to evaluate the group efficiency of square anchor plates embedded horizontally in sand at shallow depth (H = 4B). The results obtained by numerical and analytical solutions are in excellent agreement.     

Prediction of fog/visibility over India using NWP Model

Frequent occurrence of fog in different parts of northern India is common during the winter months of December and January. Low visibility conditions due to fog disrupt normal public life. Visibility conditions heavily affect both surface and air transport. A number of flights are either diverted or cancelled every year during the winter season due to low visibility conditions, experienced at different airports of north India. Thus, fog and visibility forecasts over plains of north India become very important during winter months. This study aims to understand the ability of a NWP model (NCMRWF, Unified Model, NCUM) with a diagnostic visibility scheme to forecast visibility over plains of north India. The present study verifies visibility forecasts obtained from NCUM against the INSAT-3D fog images and visibility observations from the METAR reports of different stations in the plains of north India. The study shows that the visibility forecast obtained from NCUM can provide reasonably good indication of the spatial extent of fog in advance of one day. The fog intensity is also predicted fairly well. The study also verifies the simple diagnostic model for fog which is driven by NWP model forecast of surface relative humidity and wind speed. The performance of NWP model forecast of visibility is found comparable to that from simple fog model driven by NWP forecast of relative humidity and wind speed.