Lateral heterogeneities in the upper and mid-mantle conductivity in Argentina

Regional studies of Sq variations measured at five permanent observatories in Argentina were performed to estimate the distribution of the electrical conductivity of the upper and mid-mantle, reaching a depth of approximately 800 km. After separating the total field into its parts of external and internal origin, the in duced field was modeled, applying two-dimensional techniques. Additionally, induction arrows and an equivalent apparent resistivity curve were calculated A north-south heterogeneity was detected, showing an increase of the conductivity of the shallower layers north of the profile, which may be related to the presence of high volcanic activity in the area.Also at CONICET (Consejo Nacional de Investigaciones Científicas y Técnicas).     

Molluscs as multidisciplinary models in environment toxicology

The primary goal of this paper is to stimulate discussion and promote the use of mollusc models and multidisciplinary research approaches in the field of environmental toxicology. Molluscs are effective models because they are ubiquitous, have highly conserved control and regulatory pathways that are often homologous to vertebrate systems, and are extremely sensitive to anthropogenic inputs. We have attempted to provide initial references as an avenue into the literature and as a means for researchers to expand their thoughts to regions outside of their own area of expertise. The authors are particularly interested in developing multidisciplinary international collaborative efforts.     

Source process of very-long-period events accompanying long-period signals at Cotopaxi Volcano,Ecuador

Renewed seismic activity of Cotopaxi, Ecuador, began in January 2001 with the increased number of long-period (LP) events, followed by a swarm of volcano-tectonic (VT) earthquakes in November 2001. In late June 2002, the activity of very-long-period (VLP) (2 s) events accompanying LP (0.5–1 s) signals began beneath the volcano. The VLP waveform was characterized by an impulsive signature, which was accompanied by the LP signal showing non-harmonic oscillations. We observed temporal changes of both the VLP and LP signals from the beginning until September 2003: The VLP signal gradually disappeared and the LP signal characterized by decaying harmonic oscillations became dominant. Assuming possible source geometries, we applied a waveform inversion method to the observed waveforms of the largest VLP event. Our inversion and particle motion analyses point to volumetric changes of a sub-vertical crack as the VLP source, which is located at a depth of 2–3 km beneath the northeastern flank. The spectral analysis of the decaying harmonic oscillations of LP events shows frequencies between 2.0 and 3.5 Hz, with quality factors significantly above 100. The increased VT activity and deformation data suggest an intrusion of magma beneath the volcano. A release of gases with small magma particles may have repetitively occurred due to the pressurization, which was caused by sustained bubble growth at the magma ceiling. The released particle-laden gases opened a crack above the magma system and triggered the resonance of the crack. We interpret the VLP and LP events as the gas-release process and the resonance of the crack, respectively.     

Antifouling biocides in discarded marine paint particles

Antifouling paint fragments collected from marinas and leisure boat maintenance facilities and in the vicinity of abandoned boats have been chemically characterised. High concentrations of Cu (23-380 mg g⁻¹) and Zn (14-160 mg g⁻¹) in the samples (n = 14) are consistent with the use of these metals in the principal biocidal and non-biocidal pigments in contemporary antifouling formulations. Up to about 2% and 7% of the respective metals were solvent-extractable, suggesting that organo-forms of Cu and Zn (e.g. pyrithiones) were also present. Of the organic biocides, dichlofluanid was present in most samples and at concentrations up to about 20 mg g⁻¹. Chlorothalonil and Irgarol 1051® were only detected in one and four cases, respectively, and Sea Nine 211® was not detected in any sample. Results are discussed in terms of UK legislation regarding biocide usage and the likely effects and fate of discarded paint particles in coastal environments where boats are repaired or moored.     

The role of antecedent groundwater heads in controlling transient aquifer storage and flood peak attenuation in karst watersheds

Transient storage of floodwaters in aquifers is known to attenuate peak flows in rivers and drive subsurface dissolution. Transient aquifer storage could be enhanced in watersheds overlying karst aquifers where caves facilitate surface and groundwater exchange. Few studies, however, have examined controls on, or magnitudes of, transient aquifer storage or flood peak attenuation in karstic watersheds. Here we evaluate flood peak attenuation with multiple linear regression analyses of 10 years of river and groundwater data from the Suwannee River, which flows over the karstic upper Floridan aquifer in north-central Florida and experiences frequent flooding. Regressions show antecedent river stage exerts the dominant control on magnitudes of transient aquifer storage, with recharge and time to peak having secondary controls. Specifically, low antecedent stages result in larger magnitudes of transient aquifer storage and thus greater flood attenuation than conditions of elevated antecedent stage. These findings suggest subsurface weathering, including cave formation and enlargement, caused by transient aquifer storage could occur on a more frequent basis in aquifers where groundwater table elevation is lowered due to anthropogenic or climatic influences. Our work also shows that measures of groundwater table elevation prior to an event could be used to improve predictive flood models. © 2018 John Wiley & Sons, Ltd.     

A heat perturbation flow meter for application in soft sediments

A prototype flow meter has been developed, based upon the heat perturbation principle, to monitor groundwater specific discharge in soft sediments. The device is designed for use in spatially intensive, long-term monitoring campaigns in remote or inconvenient locations, and is cheap, robust and capable of being logged automatically. The results of the laboratory tests indicate that the heat perturbation principle is suitable for determining the magnitude of specific discharge to a degree of accuracy that would be useful in practical applications in dynamic groundwater systems with rapidly changing flows of approximately 1 md⁻¹ or more and that the groundwater flow direction can generally be determined to a high level of precision. The accuracy and reliability of the estimates of specific discharge have been shown to depend strongly upon the geometrical precision of manufacture and the quality of the temperature monitoring system. These factors become most significant in the estimation of lower flows and further investigation is required to determine the detection limit of the device. Specific discharge estimates have been shown to be insensitive to dispersivity values appropriate to the scale of the device. Unlike the majority of heat perturbation devices, calibration is unnecessary.     

Investigation of natural and anthropogenic hydrocarbon inputs in sediments using geochemical markers. I. Santos, SP--Brazil

A study on the inputs of organic matter to marine sediments of Santos Bay and Estuary, located in southeastern S?o Paulo State, Brazil, is presented here. The following geochemical markers were identified and quantified: aliphatic hydrocarbons (normal and isoprenoid alkanes), petroleum biomarkers, linear alkylbenzenes (LABs) and polycyclic aromatic hydrocarbons (PAHs). Sediment samples, collected at 15 sites in the bay and surrounding channels, were extracted and analyzed by gas chromatography with flame ionization and mass spectrometer detectors. Total concentrations varied from 0.17 to 107.80 microg g(-1) for aliphatics, from 47.2 to 2560.1 ng g(-1) for petroleum biomarkers, from 16.9 to 430.6 ng g(-1) for LABs and from 79.6 to 15389.1 ng g(-1) for PAHs. Anthropogenic contributions were apparent, indicating the influences of the Cubatao industrial complex, sewage outfalls along the area, the waste deposit of Santos city and storage facilities for petroleum and derivatives, based on the higher concentrations of geochemical markers detected.     

Foraminifera as indicators of marine pollutant contamination on the inner continental shelf of southern Brazil

Analyses of living foraminiferal and environmental parameters near an outfall at Mar Grosso Beach (Laguna, SC, Brazil) demonstrate its usefulness as indicators of domestic sewage pollution. The low species diversity may be due to sand accumulation in the central part. Higher diversity was noted closer to the mouth of Laguna estuarine system where reduced salinity and higher temperatures indicate freshwater influence, suggesting a relationship between increased diversity and greater availability of terrestrial food. On the basis of foraminiferal diversity and average coliform count the higher values are closer to the mouth of the estuarine system and under the influence of the outfall. Due to the effect of local hydrodynamics, the particulate organic waste derived from the outfall does not settle down locally, and thus, do not accumulate nearby. Our hypothesis is that the fine material derived from the outfall is accumulating on the southwestern and northwestern parts of the beach.     

Surface changes on crystalline stones due to salt crystallisation

This study assesses the changes on the surface of crystalline stones due to salt crystallisation. Efflorescence was forced to grow on the surface of granite and marbles through 60 cycles of salt crystallisation with sodium sulphate. Changes on surface roughness, gloss and colour were measured every 15 cycles and the specimens were examined with naked eye and SEM. Sodium sulphate produces damage which depends on mineral composition. Results show that granites experience a mechanical decay with an increase in roughness. Peaks of mica can be observed on the surface and cracks widen and grow deeper. Colour and gloss do not show any significant change, although gloss decreases with an increase in surface roughness. In marbles, the decay is mainly chemical. Surface roughness increases due to dissolution of the calcite. White marbles exhibit yellowing. Gloss decreases during the first cycles—as grain boundaries become more visible—but tends to regain almost its initial value as the number of cycles increases. In this case, gloss does not show any relation with surface roughness.