Comparison of web plate numerical models for self‐centering steel plate shear walls

Previous research has shown that self‐centering steel plate shear walls (SC‐SPSWs) are capable of achieving enhanced seismic performance at multiple hazard levels, including recentering following design‐level earthquakes. When modeling SC‐SPSWs numerically, these studies considered an idealized tension‐only steel plate shear wall (SPSW) web plate behavior. Research has shown that web plate behavior is more complex than predicted by the idealized model, and web plates can provide more strength, stiffness, and energy dissipation than predicted by the idealized model. The idealized model of web plate behavior is used widely in SPSW numerical models where the moment‐resisting boundary frame provides supplemental hysteretic damping and stiffness; however, in SC‐SPSWs, where the post‐tensioned boundary frame is designed to remain elastic during an earthquake, accounting for the more complex web plate behavior can have a significant impact on seismic performance estimates from numerical simulation. This paper presents different methods for modeling SC‐SPSWs. Responses from these models are compared with experimental results. A simple modification of the tension‐only model, referred to as the tension‐compression strip model, is shown to provide a reasonable approximation of SC‐SPSW behavior. Results from nonlinear response history analyses of SC‐SPSWs with the tension‐only and tension‐compression web plate models are compared to assess how the approximation of web plate behavior affects SC‐SPSW seismic performance. Copyright © 2015 John Wiley & Sons, Ltd.     

Radial velocity searches for other planetary systems:Current status and future prospects

Measurement of variations in the radial velocities of stars due to the reflex orbital motion of the star around the planetary-system barycenter constitutes a powerful method of searching for substellar or planetary mass companions. After several years of patient data acquisition, radial-velocity searches for planetary systems around other stars are now beginning to bear fruit. In late 1995 and early 1996, three candidate systems were announced with Jovian-mass planets around solar-type stars. The current paradigm for low-mass star formation suggests that planetary systems should be able to form in the circumstellar disks surrounding young stellar objects. These newly discovered systems, and other discoveries which will soon follow them, will test critically our understanding of the processes of star- and planet-formation. We review the techniques used in these radial-velocity searches and their results to date. We then discuss planned improvements in the surveys, and the prospects for the next 20 years.     

Late glacial and holocene landscapes of central Beringia

New palynological and sedimentological data from St. Lawrence Island present a rare view into late-glacial and Holocene environments of the central Bering Land Bridge. The late glaciation was a time of dynamic landscape changes in south-central Beringia, with active thermokarst processes, including the formation and drainage of thaw lakes. The presence of such a wet, unstable substrate, if widespread, probably would have had an adverse impact on food sources and mobility for many of the large mammal populations. The establishment of Betula shrub tundra on the island suggests late-glacial summers that were warmer than present, consistent with regional paleoclimatic interpretations. However, the increasing proximity to the Bering Sea, as postglacial sea levels rose, modified the intensity of warming and prevented the establishment of deciduous forest as found in other areas of Beringia at this time. The mid- to late Holocene is marked by more stable land surfaces and development of Sphagnum and Cyperaceae peat deposits. The accumulation of organic deposits, decline of shrub Betula, and decrease in thermokarst disturbance suggest that conditions were cooler than the previous. A recent decline in peat accumulation at the study sites may relate to local geomorphology, but similar decreases have been noted for other arctic regions.     

A heat perturbation flow meter for application in soft sediments

A prototype flow meter has been developed, based upon the heat perturbation principle, to monitor groundwater specific discharge in soft sediments. The device is designed for use in spatially intensive, long-term monitoring campaigns in remote or inconvenient locations, and is cheap, robust and capable of being logged automatically. The results of the laboratory tests indicate that the heat perturbation principle is suitable for determining the magnitude of specific discharge to a degree of accuracy that would be useful in practical applications in dynamic groundwater systems with rapidly changing flows of approximately 1 md⁻¹ or more and that the groundwater flow direction can generally be determined to a high level of precision. The accuracy and reliability of the estimates of specific discharge have been shown to depend strongly upon the geometrical precision of manufacture and the quality of the temperature monitoring system. These factors become most significant in the estimation of lower flows and further investigation is required to determine the detection limit of the device. Specific discharge estimates have been shown to be insensitive to dispersivity values appropriate to the scale of the device. Unlike the majority of heat perturbation devices, calibration is unnecessary.     

Antifouling biocides in discarded marine paint particles

Antifouling paint fragments collected from marinas and leisure boat maintenance facilities and in the vicinity of abandoned boats have been chemically characterised. High concentrations of Cu (23-380 mg g⁻¹) and Zn (14-160 mg g⁻¹) in the samples (n = 14) are consistent with the use of these metals in the principal biocidal and non-biocidal pigments in contemporary antifouling formulations. Up to about 2% and 7% of the respective metals were solvent-extractable, suggesting that organo-forms of Cu and Zn (e.g. pyrithiones) were also present. Of the organic biocides, dichlofluanid was present in most samples and at concentrations up to about 20 mg g⁻¹. Chlorothalonil and Irgarol 1051® were only detected in one and four cases, respectively, and Sea Nine 211® was not detected in any sample. Results are discussed in terms of UK legislation regarding biocide usage and the likely effects and fate of discarded paint particles in coastal environments where boats are repaired or moored.     

An observational study of coronal hole rotation over the sunspot cycle

An analysis of the rotation of coronal holes (CHs) spanning 18 years was done based on data from theCatalogue of Coronal Holes (Sanchez-Ibarra and Barraza-Paredes, 1992). A differential rotation of CHs is confirmed for the totality of CHs, but a different behavior was found when those were separated as equatorial or isolated, and polar hole extensions, such as in theCatalogue. Isolated CHs show a typical differential rotation, but polar hole extensions display two different types of behavior: a rotation rate below 40° ± 5° of heliographic latitude, increasing to the equator, and a rotation rate above the same heliographic latitude but increasing to the poles. Also discussed here is how this last result agrees with other studies that indicate the mostly rigid rotation of the corona at higher latitudes.     

Crustal attenuation in the Southern Andean retroarc (38°–39°30′ S) determined from tectonic and gravimetric studies: The Lonco-Luán asthenospheric anomaly

The western retroarc of the Southern Andes between 38° and 40° S is formed by a NNW-elongated ridge not associated with stacked thrust sheets. On the contrary, during the last 4–3 Ma this ridge was affected by extensional deformation, regional uplift and related folding on a very broad scale. Receiver function analysis shows that the drainage divide area and adjacent retroarc lie over an attenuated crust. Expected crustal thickness at these latitudes is around 38 km, whereas in this part of the retroarc the thickness is less than 32 km. The causes for such attenuation have been linked to a moderate steepening of the subducted Nazca plate beneath the South American plate, which is suggested by a westward shift and narrowing of the magmatic arc during the last 4 to 5 Ma. Gravimetric studies show that the upper plate did not react homogeneously to slab steepening, but ancient sutures and lithospheric discontinuities deeply buried under Mesozoic to Cenozoic sequences in the retroarc were locally reactivated. These processes resulted in an asthenospheric anomaly that correlates at the surface with the area of Pliocene to Quaternary doming, widespread extension and three radial troughs. Two of the troughs have accommodated substantial amounts of extension, but the third was probably aborted at an early stage. Moreover, the presence of an anomalous concentration of calderas and large volcanic centers over the proposed asthenospheric anomaly, and their age distribution, may indicate minor migration of the asthenospheric anomaly between 4 and 2 Ma through the western South American plate.     

Nonseismic phenomena in the generation and augmentation of tsunamis

While earthquakes generate about 90% of all tsunamis, volcanic activity, landslides, explosions, and other nonseismic phenomena can also result in tsunamis. There have been 53 000 reported deaths as a result of tsunamis generated by landslides and volcanoes. No death tolls are available for many events, but reports indicate that villages, islands, and even entire civilizations have disappeared. Some of the highest tsunami wave heights ever observed were produced by landslides. In the National Geophysical Data Center world-wide tsunami database, there are nearly 200 tsunami events in which nonseismic phenomena played a major role. In this paper, we briefly discuss a variety of nonseismic phenomena that can result in tsunamis. We discuss the magnitude of the disasters that have resulted from such events, and we discuss the potential for reducing such disasters by education and warning systems.     

Effects of mechanical and chemical processes on the degradation of plastic beach debris on the island of Kauai, Hawaii

Plastic debris is accumulating on the beaches of Kauai at an alarming rate, averaging 484 pieces/day in one locality. Particles sampled were analyzed to determine the effects of mechanical and chemical processes on the breakdown of polymers in a subtropical setting. Scanning electron microscopy (SEM) indicates that plastic surfaces contain fractures, horizontal notches, flakes, pits, grooves, and vermiculate textures. The mechanically produced textures provide ideal loci for chemical weathering to occur which further weakens the polymer surface leading to embrittlement. Fourier transform infrared spectroscopy (FTIR) results show that some particles have highly oxidized surfaces as indicated by intense peaks in the lower wavenumber region of the spectra. Our textural analyses suggest that polyethylene has the potential to degrade more readily than polypropylene. Further evaluation of plastic degradation in the natural environment may lead to a shift away from the production and use of plastic materials with longer residence times.