Propagation and Damping of a Localized Impulsive Longitudinal Perturbation in Coronal Loops

We use linear analysis to simulate the evolution of a coronal loop in response to a localized impulsive event. The disturbance is modeled by injecting a narrow Gaussian velocity pulse near one footpoint of a loop in equilibrium. Three different damping mechanisms, namely viscosity, thermal conduction, and optically thin radiation, are included in the loop calculations. We consider homogeneous and gravitationally stratified, isothermal loops of varying length (50≤L≤400 Mm) and temperature (2≤T≤10 MK). We find that a localized pulse can effectively excite slow magnetoacoustic waves that propagate up along the loop. The amplitudes of the oscillations increase with decreasing loop temperature and increasing loop length and size of the pulse width. At T≥4 MK, the waves are dissipated by the combined effects of viscosity and thermal conduction, whereas at temperatures of 2 MK, or lower, wave dissipation is governed by radiative cooling. We predict periods in the range of 4.6?–?41.6 minutes. The wave periods remain unaltered by variations of the pulse size, decrease with the loop temperature, and increase almost linearly with the loop length. In addition, gravitational stratification results in a small reduction of the periods and amplification of the waves as they propagate up along the loop.     

A Century of Solar Ca <Emphasis Type="SmallCaps">ii</Emphasis> Measurements and Their Implication for Solar UV Driving of Climate

Spectroheliograms and disk-integrated flux monitoring in the strong resonance line of Ca ii (K line) provide the longest record of chromospheric magnetic plages. We compare recent reductions of the Ca ii K spectroheliograms obtained since 1907 at the Kodaikanal, Mt. Wilson, and US National Solar Observatories. Certain differences between the individual plage indices appear to be caused mainly by differences in the spectral passbands used. Our main finding is that the indices show remarkably consistent behavior on the multidecadal time scales of greatest interest to global warming studies. The reconstruction of solar ultraviolet flux variation from these indices differs significantly from the 20th-century global temperature record. This difference is consistent with other findings that, although solar UV irradiance variation may affect climate through influence on precipitation and storm tracks, its significance in global temperature remains elusive.     

Central Paratethys paleoenvironment during the Badenian (Middle Miocene): evidence from foraminifera and stable isotope (δ<Superscript>13</Superscript>C and δ<Superscript>18</Superscript>O) study in the Vienna Basin (Slovakia)

Stable isotope data of the foraminiferal carbonate shells and bulk sediment samples from the Central Paratethys were investigated to contribute to better knowledge of the paleoenvironmental changes in Badenian (Middle Miocene). Five benthic (Uvigerina semiornata, U. aculeata, Ammonia beccarii, Elphidium sp. and Heterolepa dutemplei) and three planktonic taxa (Globigerina bulloides, G. diplostoma and Globigerinoides trilobus), characterising the bottom, intermediate and superficial layers of the water column, were selected from the Vienna Basin (W Slovakia). The foraminiferal fauna and its isotope signal point out to temperature-stratified, nutrient-rich and consequently less-oxygenated marine water during the Middle/Late Badenian. Negative carbon isotope ratios indicate increased input of ¹²C-enriched organic matter to the bottom of the Vienna Basin. Positive benthic δ¹⁸O implies that the global cooling tendency recorded in the Middle Miocene has also affected the intramountain Vienna Basin. In this time, the Central Paratethys has been in the process of isolation. Our stable isotope trend suggests that the communication with Mediterranean Sea has been still more or less active on the south of Vienna Basin (Slovak part) in the Late Badenian, whereas the seawater exchange towards north was apparently reduced already during the Middle Badenian.     

Conditional nonlinear optimal perturbation: Applications to stability,sensitivity, and predictability

Conditional nonlinear optimal perturbation (CNOP) is a nonlinear generalization of linear singular vector (LSV) and features the largest nonlinear evolution at prediction time for the initial perturbations in a given constraint. It was proposed initially for predicting the limitation of predictability of weather or climate. Then CNOP has been applied to the studies of the problems related to predictability for weather and climate. In this paper, we focus on reviewing the recent advances of CNOP’s applications, which involves the ones of CNOP in problems of ENSO amplitude asymmetry, block onset, and the sensitivity analysis of ecosystem and ocean’s circulations, etc. Especially, CNOP has been primarily used to construct the initial perturbation fields of ensemble forecasting, and to determine the sensitive area of target observation for precipitations. These works extend CNOP’s applications to investigating the nonlinear dynamical behaviors of atmospheric or oceanic systems, even a coupled system, and studying the problem of the transition between the equilibrium states. These contributions not only attack the particular physical problems, but also show the superiority of CNOP to LSV in revealing the effect of nonlinear physical processes. Consequently, CNOP represents the optimal precursors for a weather or climate event; in predictability studies, CNOP stands for the initial error that has the largest negative effect on prediction; and in sensitivity analysis, CNOP is the most unstable (sensitive) mode. In multi-equilibrium state regime, CNOP is the initial perturbation that induces the transition between equilibriums most probably. Furthermore, CNOP has been used to construct ensemble perturbation fields in ensemble forecast studies and to identify sensitive area of target observation. CNOP theory has become more and more substantial. It is expected that CNOP also serves to improve the predictability of the realistic predictions for weather and climate events plays an increasingly important role in exploring the nonlinear dynamics of atmospheric, oceanic and coupled atmosphere-ocean system. Supported by National Basic Research Program of China (Grant Nos. 2006CB403606, 2007CB411800), National Natural Science Foundation of China (Grant Nos. 40830955, 40675030, 40505013), Institute of Atmospheric Physics, Chinese Academy of Sciences (Grant No. IAP07202), and LASG State Key Laboratory Special Fund     

Hydrothermal hexahydrite spherules erupted during the 2008–2010 summit eruption of Kīlauea Volcano,Hawai`i

Small (1–3 mm), hollow spherules of hexahydrite have been collected falling out of the magmatic gas plume downwind of Kīlauea’s summit vent. The spherules were observed on eight separate occasions during 2009–2010 when a lake of actively spattering lava was present ~150–200 m below the rim of the vent. The shells of the spherules have a fine bubbly foam structure less than 0.1 mm thick, composed almost entirely of hexahydrite [MgSO₄·6H₂O] Small microspherules of lava (<5 μm across) along with mineral and rock fragments from the magmatic plume adhered to the outside of the hexahydrite spherules. Phase relationships and the particulate matter in the magmatic plume indicate that the spherules originated as a bubbly solution injected into and mixed with the magmatic plume. The most likely mechanism for production of hexahydrite spherules is boiling of MgSO₄-saturated meteoric water in the walls of the conduit above the surface of the lava lake. Solfataric sulfates may thus be recycled and reinjected into the plume, creating particulates of sulfate minerals that can be distributed far from their original source.     

Assessment of the pseudo total metal content in alluvial sediments from Danube River,Serbia

We used elemental carbon, nitrogen, hydrogen and sulfur as well as ratios of hydrogen and nitrogen with total organic carbon for investigation of source and conditions of organic matter in alluvial Danube sediments. We also determined the pseudo total concentrations of metals presented as a sum of extracted concentration after five sequential extraction steps. The pseudo total metal concentrations were found to be (mg kg⁻¹) for Mn, 666; Fe, 25,852; Mg, 16,193; K, 2,063; Ni, 32.4; Zn, 72.2; Pb, 15.0; Cu, 26.0 and for Cr, 15.9. Correlation analysis and two multivariate analysis methods (principal component and cluster analysis) were helpful in determining the associations between the pseudo total extracted fractions of metals and with elemental carbon, hydrogen, nitrogen, sulfur, total inorganic and organic carbon. These correlations will help us to identify substrates of trace metals in different oxic/anoxic conditions. The correlation results of the trace metals and Fe, K, Mg and Mn suggest their adsorption, mainly onto Fe and Mn (hydro)oxides and K alumosilicates, whereas correlations of metals with sulfur indicate that they were precipitated as Fe-sulfides.     

Measurement on soil deformation caused by expanded-base pile in transparent soil using particle image velocimetry (PIV)

A new small-scale geotechnical physical model in 1-g and unconfined condition, combining the transparent soil, close-range photogrammetry and particle image velocimetry (PIV), was employed, which provides a non-intrusively internal deformation measurement approach to monitor the internal deformation of soil caused by expanded-base pile jacking with casing. The transparent soil was made of fused quartz and its refractive index matched blended oil, adding reflective particles (glass beads). Close-range photogrammetry was employed to record the images of the process of casing jacking and extraction in transparent soil, allowing the use of Matlab-based Geo-PIV to figure out the displacement field converted from image space to object space. Analysis of test results indicates that the maximum displacement caused by casing jacking for expanded-conical-base pile is decreased by 29% compared with that for expanded-flat-base pile. The main movement happens at the early stage of casing extraction. The maximum displacement caused by casing extraction for the conical base is about 43% of that for the flat base, while the affected zone caused by casing extraction for the conical base accounts for about 1/3 of that for the flat base. The contraction for horizontal displacements tends to decrease with the depth increasing. By contrast, the contraction under pile base decreases with the increasing of displacement. The displacements generated by jacking a conventional pile having a diameter equal to the casing diameter of the expanded-base pile were comparable to the net displacement taking place due to expanded-base pile installation for the conical base pile.     

Characteristics and interpretation of the seismic signal of a field-scale landslide dam failure experiment

Outburst floods caused by breaches of landslide dams may cause serious damages and loss of lives in downstream areas; for this reason the study of the dynamic of the process is of particular interest for hazard and risk assessment. In this paper we report a field-scale landslide dam failure experiment conducted in Nantou County, in the central of Taiwan.The seismic signal generated during the dam failure was monitored using a broadband seismometer and the signal was used to study the dam failure process.We used the short-time Fourier transform(STFT) to obtain the time–frequency characteristics of the signal and analyzed the correlation between the power spectrum density(PSD) of the signal and the water level. The results indicate that the seismic signal generated during the process consisted of three components: a low-frequency band(0–1.5 Hz), an intermediate-frequency band(1.5–10 Hz) and a highfrequency band(10–45 Hz). We obtained the characteristics of each frequency band and the variations of the signal in various stages of the landslide dam failure process. We determined the cause for the signal changes in each frequency band and its relationship with the dam failure process. The PSD sediment flux estimation model was used to interpret the causes of variations in the signal energy before the dam failure and the clockwise hysteresis during the failure. Our results show that the seismic signal reflects the physical characteristics of the landslide dam failure process. The method and equipment used in this study may be used to monitor landslide dams and providing early warnings for dam failures.     

Spatial patterns and storage composition of woody debris in a natural secondary forest dominated by <Emphasis Type="Italic">Pinus tabulaeformis</Emphasis> on Loess Plateau,China

Woody debris (WD) is an important part of natural Pinus tabulaeformis mixed stands, and it affects the forest ecosystem stability and development. The WD spatial patterns are especially important structural characteristics that can provide insights into forest dynamics. In this paper, the WD storage, WD spatial patterns and WD associations among the main species were examined in the natural secondary forest on Loess Plateau in northwest China. Data were collected in a 1 ha (100 m × 100 m) permanent plot, and all the trees with a diameter at breast height of more than 3 cm were measured and stem-mapped. Ripley’s K functions from the spatial-point-pattern-analysis method were used to analyze the spatial distribution and associations. The results showed that: (1) The total storage of WD was 10.73 t/ha, fallen wood was the main source of WD, and the majority diameters were greater than 20 cm, and in intermediate levels of decay; (2) The overall spatial pattern was closely related to the spatial scale, which exhibited an aggregated pattern on a small scale, and a random pattern on a large scale. The spatial patterns of coarse woody debris also gradually transitioned from an aggregated pattern in fine scales to a random pattern in broader spatial scales, which matched the overall spatial pattern. The spatial intensity was gradually decreased with the increasing diameters, and increased with the decomposition classes; (3) The WD of Pinus tabulaeformis species was negatively associated with Betula platyphylla and Populus davidiana on a small scale but positively associated with these species on a large scale. The spatial pattern and interspecies relations were the results of long-term interactions between the natural secondary forest community and the surrounding natural environment. These findings would provide a scientific basis for the sustainable management and protection of natural secondary forest ecosystems on Loess Plateau.