Pegmatite Emplacement in the Seridó Belt, Northeastern Brazil: Late Stage Kinematics of the Brasiliano Orogen

Geometric and kinematic analysis was performed in an area located in the central part of the Seridó Belt (NE Brazil), where supracrustal rocks affected by polyphase deformation are well exposed. The first event recognized in this area (and regionally known as the D₂ deformation) is characterized by top to the south thrust tectonics while a second one (D₃ deformation) is marked by upright folds, strike-slip or transpressive shear zones and the development of flower structures. Major pegmatite swarms were emplaced during and late as regards the second event (dated ca. 580 Ma), being part of the Brasiliano orogeny; similar dyke swarms are known from the Nigerian Shield. These pegmatite swarms provide reliable kinematic markers of the late evolutionary stage of the Neoproterozoic Trans-Sahara-Borborema collisional belt. Mineralogical, geometric and kinematic features support two stages of pegmatite emplacement during the strike-slip event: (i) older, syn-D₃ homogeneous pegmatites intruded mostly along lithological and structural discontinuities, such as foliation surfaces; (ii) late, D₃ heterogeneous pegmatites were emplaced along tension gashes and other dilation structures. The heterogeneous pegmatites are economically more important, being exploited for precious metals and stones, as well as industrial minerals.     

Two Brazilian archaeological sites investigated by GPR: Serrano and Morro Grande

The application of the ground penetrating radar (GPR) at two archaeological sites, Serrano and Morro Grande, situated in Araruama County, Rio de Janeiro, Brazil, aids the study of a prehistoric indigenous culture, associated with the “Tupinambá” that inhabited the region during prehistoric times.The archaeological remains of the study area are mainly characterized by pottery artifacts for several uses, including funerary urns, which were buried within layers of sand and clay. Several profiles were acquired using a RAMAC system, with a 200 and 400 MHz frequency antennae. At the Serrano site, the profiles were acquired around some partially exposed pottery shards, due to sand exploitation. The resultant profiles provided a response model to guide the interpretation of new profiles acquired at other sites in the area, which present similar characteristics.The results showed the great importance of the dielectric permittivity contrast which exists between the targets and the host media, in order for possibly significant features to be identified in radar data.     

U–Pb zircon chronostratigraphy of early-Pliocene ignimbrites from La Pacana, north Chile: implications for the formation of stratified magma chambers

High spatial resolution U–Pb dates of zircons from two consanguineous ignimbrites of contrasting composition, the high-silica rhyolitic Toconao and the overlying dacitic Atana ignimbrites, erupted from La Pacana caldera, north Chile, are presented in this study. Zircons from Atana and Toconao pumice clasts yield apparent ²³⁸U/²⁰⁶Pb ages of 4.11±0.20 Ma and 4.65±0.13 Ma (2σ), respectively. These data combined with previously published geochemical and stratigraphic data, reveal that the two ignimbrites were erupted from a stratified magma chamber. The Atana zircon U–Pb ages closely agree with the eruption age of Atana previously determined by K–Ar dating (4.0±0.1 Ma) and do not support long (>1 Ma) residence times. Xenocrystic zircons were found only in the Toconao bulk ignimbrite, which were probably entrained during eruption and transport. Apparent ²³⁸U/²⁰⁶Pb zircon ages of 13 Ma in these xenocrysts provide the first evidence that the onset of felsic magmatism within the Altiplano–Puna ignimbrite province occurred approximately 3 Myr earlier than previously documented.     

Pahoehoe and aa in Hawaii: volumetric flow rate controls the lava structure

The historical records of Kilauea and Mauna Loa volcanoes reveal that the rough-surfaced variety of basalt lava called aa forms when lava flows at a high volumetric rate (>5–10 m³/s), and the smooth-surfaced variety called pahoehoe forms at a low volumetric rate (<5–10 m³/s). This relationship is well illustrated by the 1983–1990 and 1969–1974 eruptions of Kilauea and the recent eruptions of Mauna Loa. It is also illustrated by the eruptions that produced the remarkable paired flows of Mauna Loa, in which aa formed during an initial short period of high discharge rate (associated with high fountaining) and was followed by the eruption of pahoehoe over a sustained period at a low discharge rate (with little or no fountaining). The finest examples of paired lava flows are those of 1859 and 1880–1881. We attribute aa formation to rapid and concentrated flow in open channels. There, rapid heat loss causes an increase in viscosity to a threshold value (that varies depending on the actual flow velocity) at which, when surface crust is torn by differential flow, the underlying lava is unable to move sufficiently fast to heal the tear. We attribute pahoehoe formation to the flowage of lava at a low volumetric rate, commonly in tubes that minimize heat loss. Flow units of pahoehoe are small (usually <1 m thick), move slowly, develop a chilled skin, and become virtually static before the viscosity has risen, to the threshold value. We infer that the high-discharge-rate eruptions that generate aa flows result from the rapid emptying of major or subsidiary magma chambers. Rapid near-surface vesiculation of gas-rich magma leads to eruptions with high discharge rates, high lava fountains, and fast-moving channelized flows. We also infer that long periods of sustained flow at a low discharge rate, which favor pahoehoe, result from the development of a free and unimpeded pathway from the deep plumbing system of the volcano and the separation of gases from the magma before eruption. Achievement of this condition requires one or more episodes of rapid magma excursion through the rift zone to establish a stable magma pathway.     

Sequential melting and fractional crystallization: Granites from Guarda-Sabugal area, central Portugal

Seven distinct phases of Variscan two-mica granite are recognized in the Guarda-Sabugal area. They intruded the Cambrian schist-metagraywacke complex, crystallized in the middle crust, and are syn- to late-D3 (309.2 ± 1.8 Ma), late-D3 (304–300 Ma) and late- to post-D3 (299 ± 3 Ma; ID-TIMS ages on zircon and monazite). Two of the granites, G2 and G5, are close in age and have similar Sr, Nd and O isotope characteristics but contrasting whole rock and mineral features and formed by sequential increasing degree of partial melting of a common metasedimentary protolith. During sequential melting Ti, total Fe, Mg, Ca, Zr, Zn, Sr, Ba and REE contents and (La/Yb)_N increase and Si and Rb contents decrease, plagioclase becomes richer in anorthite and biotite and muscovite richer in Ti and Mg. Each of these granites evolved subsequently by fractional crystallization of quartz, K-feldspar, plagioclase, biotite and ilmenite, defining separate series G2–G3–G7 and G5–G6 containing late Sn-bearing differentiates. Two other granites G1 and G4 represent distinct pulses of magma with individual fractionation trends for major and trace elements and distinct (⁸⁷Sr/⁸⁶Sr)₃₀₀, ?Nd₃₀₀ and δ¹⁸O values.     

Tidal transport and dispersal of marine toxic microalgae in a shallow, temperate coastal lagoon

A numerical model was used to predict toxic microalgal transport and dispersion in Ria de Aveiro in Portugal. A previously developed Lagrangean particle tracking model coupled to a calibrated two-dimensional hydrodynamic model of Ria de Aveiro was used. Microalgae were regarded as passive particles and the methodology used allowed the determination of their trajectories, as induced by the tidal currents predicted by the hydrodynamic model. The model assumes Ria de Aveiro as vertically homogeneous and does not take into account the vertical distribution patterns of microalgae. Simulations were carried out during extreme spring and neap tides, with microalgal released at the mouth of the lagoon at the local flood. The maximum and minimum areas affected during the occurrence of toxic microalgal blooms were estimated to evaluate the suitability of the distribution of the sampling stations included in the local monitoring program. It was found that the tidal currents greatly determine the microalgal horizontal distribution and dispersal in the lagoon. The results confirmed that the locations of water and bivalve shellfish sampling stations, postulated by INIAP/IPIMAR, in the context of the local harmful algal bloom (HAB) program, were appropriate, although some possible refinements were identified.     

Observations of mine seismicity in the eastern Wasatch Plateau,Utah, U.S.A.: A possible case of implosional failure

In the summer of 1984, a three-dimensional, high-resolution microearthquake network was operated in the vicinity of two coal mines beneath Gentry Mountain in the eastern Wasatch Plateau, Utah. During a six-week period, approximately 3,000 seismic events were observed of which the majority were impulsive, higher frequency (>10 Hz), short duration (<2–3 sec) events probably associated with the caving of the roof from a longwall operation. In contrast, 234 of the largest located events appeared to occur predominantlybeneath the mines to a depth of 2 to 3 km consistent with previous studies. The magnitudes of these events ranged from less thanM _c 0 to 1.6. In addition to the unusual depths of these latter events, an anomalous aspect displayed by the events was an apparent dilatational focal mechanism suggesting a non-double-couple, possibly implosional source. Implosional events have been observed in other studies of mine seismicity; however, the generally inadequate instrumental coverage of the focal sphere has cast some doubt on the validity of such mechanisms. Previously suggested source mechanisms for such implosional events have included tensional failure through strata collapse, and a shear-implosional displacement mechanism. Shear failure must be involved in the failure process of the Gentry Mountain implosional events as evidenced by well-defined shear waves in the observed seismograms. Simultaneous monitoring in the East Mountain coal mining area to the south by the University of Utah revealed typical shear failure events mixed with implosional events. The observed double-couple, reverse focal mechanisms at East Mountain were similar to mechanisms determined in previous studies and a composite focal mechanism determined in this study for a sequence outside the mining areas. This suggested that the shear events within the mining areas are being influenced by the regional tectonic stress field. Thus in addition to the seismic events associated with caving of the roof from the longwall operation, there appear to be at least two other types of mining-induced seismic events occurring in the eastern Wasatch Plateau, both submine in origin: (1) events characterized by apparent non-double-couple possibly implosional focal mechanisms and well-defined shear waves; and (2) shear events, which are indistinguishable from tectonic earthquakes and may be considered mining triggered earthquakes. The small mining-induced stress changes that occur beyond a few hundred meters from the mine workings suggest both types of seismic events are occurring on critically stressed, pre-existing zones of weakness. Topography, overburden, method of mining, and mine configuration also appear to be significant factors influencing the occurrence of the implosional submine events.     

Low Visibility Formation and Forecasting on the Northern Coast of Brazil

Visibility analysis and forecast at the Maceio International Airport in the Brazilian Northeast (NEB) was the principal goal of this investigation. Surface meteorological data of the Maceio International Airport were used for low visibility frequency study. Low visibility in NEB was provoked more frequently by light fog (LF) formation (1,098 or 92 h month^?1 on average). Haze and fog were very rare (81 h and one event per year, respectively on average). Light fog with a visibility less than 2 km usually was detected together with rain or drizzle. Low visibility was observed more frequently at night and during the rainy season. Applications of the Hybrid Single Particle Lagrangian Integrated Trajectory (HYSPLIT) model for light fog forecast were tested. Thermodynamic processes were studied by vertical profile, elaborated by: (1) National Centers for Environmental Prediction (NCEP) reanalysis data for Maceio (because of some radiosonde absence) and (2) forecast vertical temperature and humidity profiles were produced, using Air Parcels Trajectories of the HYSPLIT model at the pattern levels. The synoptic situations before and during low visibility phenomena were analyzed using different products of NCEP reanalysis, the high resolution (10 km) ETA model and infrared satellite images. Wave disturbance in the trade winds field, localized on the northwest periphery of the South Atlantic subtropical High, usually accompanied the phenomena. A humidity advection, weak ascendant movement and thermal inversion absence at the low levels were created by these waves. The middle level’s descendent movement provoked the humidity accumulation at levels below. Satisfactory results of the HYSPLIT model applications for light fog forecast were obtained with 12 h antecedence. In particular, stable level forecast by the ETA model was forecast satisfactorily with 12 h antecedence; vertical movements were predicted better with up to 48 h antecedence. The PSU/NCAR mesoscale model (MM5) and PAFOG models were tested for analysis and forecast of an intensive fog event. Intensive fog provoked a fatal accident of a small airplane near the Maceio Airport in 2007. These fog formation processes were studied by NCEP reanalysis data, the high resolution regional model MM5, and satellite and radar data. Fog formation was simulated by PAFOG model and satisfactory results were obtained with 10 h antecedence.