A recent build-up of atmospheric CO2 over Europe. Part 1: observed signals and possible explanations

We analysed interannual and decadal changes in the atmospheric CO₂ concentration gradient (ΔCO₂) between Europe and the Atlantic Ocean over the period 1995–2007. Fourteen measurement stations are used, with Mace-Head being used to define background conditions. The variability of ΔCO₂ reflects fossil fuel emissions and natural sinks activity over Europe, as well as atmospheric transport variability. The mean ΔCO₂ increased by 1–2 ppm at Eastern European stations (∼30% growth), between 1990–1995 and 2000–2005. This built up of CO₂ over the continent is predominantly a winter signal. If the observed increase of ΔCO₂ is explained by changes in ecosystem fluxes, a loss of about 0.46 Pg C per year would be required during 2000–2005. Even if severe droughts have impacted Western Europe in 2003 and 2005, a sustained CO₂ loss of that magnitude is unlikely to be true. We sought alternative explanations for the observed CO₂ build-up into transport changes and into regional redistribution of fossil fuel CO₂ emissions. Boundary layer heights becoming shallower can only explain 32% of the variance of the signal. Regional changes of emissions may explain up to 27% of the build-up. More insights are given in the Aulagnier et al. companion paper.     

Nonparametric Estimates of the Sea State Bias for the Jason-1 Radar Altimeter

The Jason-1 sea state bias (SSB) is analyzed in depth from the first year of GDR products. Compared to previous missions, this work benefits from two aspects of the empirical determination of the SSB from the altimetric data themselves. First, from a methodological point of view, a nonparametric technique (NP) has been developed and largely tested on TOPEX/Poseidon 1, GFO and Envisat data. The NP estimator has proven to be a useful tool in the SSB estimation, and it is now mature enough to be used for a refined analysis. On the other hand, the SSB can be extracted from three different data sets (crossovers, collinear data, and residuals) with different characteristics. It is then possible to cross calibrate various estimations of the SSB models and to determine the most accurate one. A systematic comparison is made between these different estimates for the Jason-1 altimeter. The collinear and crossover data sets yield very similar estimates despite their difference of spatial and temporal distributions. These SSB models assure consistency with the TOPEX mission when comparing Jason-1 and TOPEX residuals during the tandem phase. Thanks to the present work, the impact of the short wavelengths filtering on the SSB estimation is evidenced. More generally, our understanding of potential errors affecting the sea surface height and their impact onto the SSB estimation is also improved.     

Hummocky cross-stratification-like structures in deep-sea turbidites: Upper Cretaceous Basque basins (Western Pyrenees, France)

Hummocky cross-stratification is a sedimentary structure which is widely interpreted as the sedimentary record of an oscillatory current generated by energetic storm waves remobilizing surface sediment on the continental shelf. Sedimentary structures named hummocky cross-stratification-like structures, similar to true hummocky cross-stratification, have been observed in the Turonian–Senonian Basque Flysch Basin (south-west France). The bathymetry (1000 to 1500 m) suggests that the observed sedimentary structures do not result from a hydrodynamic process similar to those acting on a continental shelf. The morphology of these three-dimensional structures shares similarities with the morphology of hummocky cross-stratification despite a smaller size. The lateral extent of these structures ranges from a few decimetres to many decimetres; they consist of convex-up domes (hummock) and concave-up swales with a non-erosive base. Four types of hummocky cross-stratification-like geometries are described; they occur in association with structures such as climbing current ripple lamination and synsedimentary deformations. In the Basque Flysch, hummocky cross-stratification-like structures are only found in the Tc interval of the Bouma sequence. Hummocky cross-stratification-like structures are sporadic in the stratigraphic series and observed only in few turbidite beds or bed packages. This observation suggests that hummocky cross-stratification-like structures are linked genetically to the turbidity current but form under a very restricted range of parameters. These structures sometimes show an up-current (upslope) migration trend (antidunes). In the described examples, they could result from standing waves forming at the upper flow interface because of Kelvin–Helmholtz instability.     

Columnar calcites as testimony of diagenetic overprinting at the boundary between Upper Tournaisian dolomites and limestones (Belgium): multiple origins for apparently similar features

In topographic flat areas, sedimentary settings may vary from one outcrop to another. In these settings, calcite precipitates may yield macroscopically similar columnar features, although they are products of different sedimentary or diagenetic processes. Three columnar calcite crystal fabrics, i.e. rosettes, palisade crusts and macro-columnar crystal fans, have been differentiated near and at the contact between Upper Tournaisian dolomites and limestones along the southern margin of the Brabant-Wales Palaeohigh. Their petrographic characteristics, and geochemical and fluid inclusion data provide information on the (dia)genetic processes involved. Rosettes composed of non-luminescent columnar calcite crystal fans (1–5 cm in diameter) developed on top of one another, forming discrete horizons in repetitive sedimentary cycles. The cycles consist of three horizons: (I) a basal horizon with fragments from the underlying horizon, (II) a micrite/microspar horizon with incipient glaebules, (III) an upper horizon consisting of calcite rosettes, with desiccation features. The petrographical features and δ¹⁸O signatures of −10·0 to −5·5‰ and δ¹³C values of −5·5 to −3·2‰ support either evaporative growth, an evaporative pedogenic origin, or overprinting of marine precipitates. Palisade crusts, composed of a few to 10 mm long non-luminescent calcite crystals, coat palaeokarst cavities. Successive palisade growth-stages occur which are separated by thin laminae of micrite or detrital quartz, displaying a geopetal arrangement. Palisade crusts are interpreted as intra-Mississippian speleothems. This interpretation is supported by their petrographic characteristics and isotopic signature (δ¹⁸O = −8·7 to −6·5‰ and δ¹³C = −4·8 to −2·5‰). Macro-columnar crystals, 1–50 cm long, developed mainly perpendicular to cavity walls and dolomite clasts. Crystal growth stages in the macro-columnar crystals are missing. δ¹⁸O values vary between −16·4 and −6·8‰ and δ¹³C values between −5·2 and −0·9‰. These features possibly support a late diagenetic high temperature precipitation in relation to hydrothermal karstification.     

Petrology and in situ U-Th-Pb Monazite Geochronology of Ultrahigh-Temperature Metamorphism from the Andriamena Mafic Unit, North-Central Madagascar. Significance of a Petrographical P-T Path in a Polymetamorphic Context

Petrological studies and electron microprobe dating of monazitefrom the mafic Andriamena unit, north–central Madagascar,indicate that an apparently continuous P–T path inferredfor Mg-granulites is actually discontinuous, resulting fromthe superposition of two distinct metamorphic events at 2·5Ga and     

Origin and migration of palaeofluids in the Upper Visean of the Campine Basin, northern Belgium

Upper Visean limestones in the Campine Basin of northern Belgium are intensively fractured. The largest and most common fractures are cemented by non-ferroan, dull brown-orange luminescent blocky calcite. First melting temperatures of fluid inclusions in these calcites are around -57°C, suggesting that precipitation of the cements occurred from NaCl-CaCl₂-MgCl₂ fluids. The final melting temperatures (T_m^ice) are between -5 and -33°C. The broad range in the T_m^ice data can be explained by the mixing of high salinity fluids with meteoric waters, but other hypotheses may also be valid. Homogenization temperatures from blocky calcite cements in the shelf limestones are interpreted to have formed between 45 and 75°C. In carbonates which were deposited close to and at the shelf margin, precipitation temperatures were possibly in the range 70-85°C and 72-93°C, respectively. On the shelf, the calcites have a δ¹⁸O around -9.3‰ PDB and they are interpreted to have grown in a fluid with a δ¹⁸O between −3.5 and +1.0‰ SMOW. At the shelf margin, blocky calcites (δ¹⁸O∼ - 13.5‰ PDB) could have precipitated from a fluid with a δ¹⁸O betweenn -4.0 and -1.1‰ SMOW. The highest oxygen isotopic compositions are comparable to those of Late Carboniferous marine fluids (δ¹⁸O= - 1‰ SMOW). The lowest values are more positive than a previously reported composition for Carboniferous meteoric waters (δ¹⁸O= -7‰ SMOW). Precipitation is likely to have occurred in marine-derived fluids, which mixed with meteoric waters sourced from near the Brabant Massif. Fluids with a similar negative oxygen isotopic composition and high salinity are actually present in Palaeozoic formations. The higher temperature range in the limestones near the shelf margin is explained by the upward migration of fluids from the ‘basinal’ area along fractures and faults into the shelf.     

The Role of Laser Ranging for Calibrating Jason-1: The Corsica Tracking Campaign

The French Transportable Laser Ranging System (FTLRS), a highly transportable Satellite Laser Ranging (SLR) instrument, was set up in Corsica (from January to September 2002) for participating to the JASON-1 altimeter verification phase. In addition to the tracking of oceanographic satellite missions and in order to perform an accurate positioning, the FTLRS also acquired laser ranging data on geodetic satellites, STARLETTE and STELLA essentially.

The paper describes the analysis strategy mainly based on the use of a short-arc orbit technique to compute accurate 1 cm local orbits, and then the geocentric positioning (2–3 mm relative to GPS). Finally, we established the JASON-1 absolute calibration value, based on 9 SLR short-arcs (between cycles 1 and 26), at 108.2 ± 8.7 mm; the 10-day repeatability is of 26.1 mm showing that a great accuracy has been reached.     

Unique authigenic mineral assemblages reveal different diagenetic histories in two neighbouring cold‐water coral mounds on Pen Duick Escarpment,Gulf of Cadiz

Alpha Mound and Beta Mound are two cold‐water coral mounds, located on the Pen Duick Escarpment in the Gulf of Cadiz amidst the El Arraiche mud volcano field where focused fluid seepage occurs. Despite the proximity of Alpha Mound and Beta Mound, both mounds differ in their assemblage of authigenic minerals. Alpha Mound features dolomite, framboidal pyrite and gypsum, whereas Beta Mound contains a barite layer and predominantly euhedral pyrite. The diagenetic alteration of the sedimentary record of both mounds is strongly influenced by biogeochemical processes occurring at shallow sulphate methane transition zones. The combined sedimentological, petrographic and isotopic analyses of early diagenetic features in gravity cores from Alpha Mound and Beta Mound indicate that the contrast in mineral assemblages between these mounds is caused by differences in fluid and methane fluxes. Alpha Mound appears to be affected by strong fluctuations in the fluid flow, causing shifts in redox boundaries, whereas Beta Mound seems to be a less dynamic system. To a large extent, the diagenetic regimes within cold‐water coral mounds on the Pen Duick Escarpment appear to be controlled by fluid and methane fluxes deriving from layers underlying the mounds and forcings like pressure gradients caused by bottom current. However, it also becomes evident that authigenic mineral assemblages are not only very sensitive recorders of the diagenetic history of specific cold‐water coral mounds, but also affect diagenetic processes in turn. Dissolution of aragonite, lithification by precipitation of authigenic minerals and subsequent brecciation of these lithified layers may also exert a control on the advective and diffusive fluid flow within these mounds, providing a feedback mechanism on subsequent diagenetic processes.