Using a Convection Model to Predict Altitudes of White Stork Migration Over Central Israel

Soaring migrants such as storks, pelicans and large birds of prey rely on thermal convection during migration. The convection model ALPTHERM was designed to predict the onset, strength, duration and depth of thermal convection for varying topographies for glider pilots, based on atmospheric conditions at midnight. We tested ALPTHERM predictions as configured for two topographies of central Israel, the Coastal Plains and the Judean and Samarian Mountains in order to predict altitudes of migrating white storks (Ciconia ciconia). Migrating flocks of white storks were tracked with a motorized glider, to measure maximum altitudes of migration during spring 2000. A significant positive correlation was found between the maximum daily altitudes of migration measured and the predicted upper boundary of thermal convection for the Coastal Plains and Samarian Mountains. Thirty-minute predictions for the Coastal Plains and Samarian Mountains correlated positively with measured maximum migration altitudes per thermal. ALPTHERM forecasts can be used to alter flight altitudes in both civil and especially military aviation and reduce the hazard of serious aircraft collisions with soaring migrants.     

A survey of possible impact structures on 25143 Itokawa

We determined the morphologies and dimensions of possible impact craters on the surface of Asteroid 25143 Itokawa from images taken by the Hayabusa spacecraft. Circular depressions, circular features with flat floors or convex floors, and circular features with smooth surfaces were identified as possible craters. The survey identified 38 candidates with widely varying morphologies including rough, smooth and saddle-shaped floors, a lack of raised rims and fresh material exposures. The average depth/diameter ratio was 0.08±0.03: these craters are very shallow relative to craters observed on other asteroids. These shallow craters are a result of (1) target curvature influencing the cratering process, (2) raised rim not being generated by this process, and (3) fines infilling the craters. As many of the crater candidates have an unusual appearance, we used a classification scheme that reflects the likelihood of an observed candidate's formation by a hypervelocity impact. We considered a variety of alternative interpretations while developing this scheme, including inherited features from a proto-Itokawa, spall scars created by the disruption of the proto-Itokawa, spall scars following the formation of a large crater on Itokawa itself, and apparent depressions due to random arrangements of boulders. The size-frequency distribution of the crater candidates was close to the empirical saturation line at the largest diameter, and then decline with decreasing diameter.     

Dating carbonate rocks with in-situ produced cosmogenic Be: Why it often fails

Surface exposure dating of carbonate rocks using cosmogenic ¹⁰Be is problematic. We have performed step-wise leaching of calcite-rich samples in order to investigate the reasons for this. Results on different grain size fractions clearly indicate the source of atmospheric ¹⁰Be is clay. We demonstrate that partial-leaching procedures, which result in moderate pH levels will not release ¹⁰Be (in-situ produced or atmospheric) due to the instant re-absorption on grain surfaces. By contrast, under strongly acidic conditions, all absorbed ¹⁰Be is leached from aluminosilicates giving abnormally high ¹⁰Be concentrations and consequently exposure ages that are too old. Dating is only possible if samples do not contain any clay minerals or if they can be removed prior to carbonate dissolution.     

Recursive algorithms for the computation of the potential harmonic coefficients of a constant density polyhedron

The gravitational potential of a constant density general polyhedron can be expressed both in terms of a closed analytical expression and as a series expansion involving the corresponding spherical harmonic coefficients. The latter can be obtained from two independent algorithms, which differ not only in their algorithmic architecture but in their efficiency and overall performance, especially when computing the coefficients of higher degree and order. In the present paper a comparative study of all these three approaches is carried out focusing on the numerical implementation of the recursive relations appearing in the two algorithms for the computation of the polyhedral potential harmonic coefficients. The performed numerical investigations show that the linear algorithm proposed by Jamet and Thomas (Proceedings of the second international GOCE user workshop, ‘GOCE, The Geoid and Oceanography’, ESA-ESRIN, Frascati, Italy, 8–10 March 2004, ESA SP-569, 2004), but so far not implemented, achieves a reasonable accuracy at a computational expense that opens to practical applications, for instance in the field of satellite gravimetry/gradiometry interpretation. The convergence behavior of the linear recursion algorithm is studied thoroughly and a computational procedure is proposed that enables the stable computation of potential harmonic coefficients up to degree 60 when referring to an arbitrarily shaped polyhedral body.     

Metasomatism and melting history of a Variscan lithospheric mantle domain: evidence from the Puy Beaunit xenoliths (French Massif Central)

Mantle xenoliths from Puy Beaunit (French Massif Central) are compositionally varied, ranging from relatively fertile spinel lherzolites to refractory spinel dunites. Fertile peridotites have registered a modal (amphibole-bearing lherzolites) and cryptic metasomatic event that took place before the last Permian (257 Ma) melting episode. Depletion processes have been constrained by chemical modelling: the depletion is related to different degrees of partial melting, but two major melt extraction episodes are needed to explain the range of major element composition. The second event was responsible for the local large-scale dunitification of former residues. The first melting event (F25%) and metasomatic enrichment are attributed to an ancient fluid and/or liquid infiltration that could be related to a pre-Variscan regional subduction (located to the north of the Beaunit area). Texture acquisition and major deformation of the mantle xenoliths were sub-contemporaneous of the subduction and would result from lithospheric delamination. The second melting event (F17%) produced high-Mg basalts with calc-alkaline trace element signature that gave rise to the Permian underplating episode recognised in western Europe.     

Biogeochemical impact of a model western iron source in the Pacific Equatorial Undercurrent

Trace element distributions in the source waters of the Pacific Equatorial Undercurrent (EUC) show the existence of elevated total acid-soluble iron concentrations. This region has been suggested to contribute enough bioavailable iron to regulate interannual and interglacial variability in biological productivity downstream in the high-nitrate low-chlorophyll upwelling zone of the eastern equatorial Pacific. We investigated the advection and first-order biogeochemical impact of an imposed, data-based iron maximum in the western Pacific EUC using an ecosystem model forced by a global dynamical model. We imposed two source profiles of iron constrained by total acid-soluble iron measurements. Though the data for total acid-soluble iron included both dissolved and acid-soluble particulate iron species, we treated all of the total acid-soluble iron as if it was dissolved and bioavailable. A deeper (270 m) source was centered in the density horizon of the observed iron maximum and a shallower (180 m) source was located in the core of our model's EUC, where a dissolved iron maximum has been frequently postulated. These source runs were compared with a control run that contained no specific source of iron associated with the EUC. In the source runs elevated iron concentrations were simulated in the EUC across its entire zonal span, evident as a subsurface plume of dissolved iron slightly below the core of the EUC. In the control run there was no iron maximum associated with the EUC. Upwelling of iron-replete water in the central and eastern equatorial Pacific increased integrated primary productivity in the Wyrtki box (180°W:90°W, 5°S:5°N, 0:200 m) by 41% and 66% for the deeper and shallower iron perturbation, respectively. The source runs increased the realism of the zonal extent of HNLC conditions and the meridional distributions of biological productivity, relative to the control run. However, in the source simulations surface chlorophyll concentrations were too high by a factor of two and maximum surface nitrate concentrations were too low, relative to climatologies. The relative abundance of diatoms roughly doubled upon the input of additional iron, exceeding field observations. Though biogeochemical data are limited and we did not adjust parameters to optimize the model fits to observations, these results suggest that acid-soluble particulate iron supplied to the EUC in the western equatorial Pacific is unlikely to be entirely bioavailable.     

Stability of methane clathrate hydrates under pressure: Influence on outgassing processes of methane on Titan

We have conducted high-pressure experiments in the H₂O-CH₄ and H₂O-CH₄-NH₃ systems in order to investigate the stability of methane clathrate hydrates, with an optical sapphire-anvil cell coupled to a Raman spectrometer for sample characterization. The results obtained confirm that three factors determine the stability of methane clathrate hydrates: (1) the bulk methane content of the samples; (2) the presence of additional gas compounds such as nitrogen; (3) the concentration of ammonia in the aqueous solution. We show that ammonia has a strong effect on the stability of methane clathrates. For example, a 10 wt.% NH₃ solution decreases the dissociation temperature of methane clathrates by 14-25 K at pressures above 5 MPa. Then, we apply these new results to Titan’s conditions. Dissociation of methane clathrate hydrates and subsequent outgassing can only occur in Titan’s icy crust, in presence of locally large amounts of ammonia and in a warm context. We propose a model of cryomagma chamber within the crust that provides the required conditions for methane outgassing: emplacement of an ice plume triggers the melting (if solid) or heating (if liquid) of large ammonia-water pockets trapped at shallow depth, and the generated cryomagmas dissociate surrounding methane clathrate hydrates. We show that this model may allow for the outgassing of significant amounts of methane, which would be sufficient to maintain the presence of methane in Titan’s atmosphere for several tens of thousands of years after a large cryovolcanic event.     

The recording of floods and earthquakes in Lake Chichój,Guatemala during the twentieth century

Laguna Chichój (Lake Chichój) is the only deep permanent lake in the central highlands of Guatemala. The lake is located in the boundary zone between the North American and Caribbean plates. The lake has been struck by devastating earthquakes and tropical cyclones in historical times. We investigated the imprint of twentieth century extreme events on the sedimentary record of this tropical lake using a bathymetric survey of the lake, coring the lake floor, and providing a chronology of sediment accumulation. The lake occupies a series of circular depressions likely formed by the rapid dissolution of a buried body of gypsum. ²¹⁰Pb and ¹³⁷Cs inventories and varve counting indicate high rates of sedimentation (1–2 cm year^?1). The annually layered sediment is interrupted by turbidites of two types: a darker-colored turbidite, enriched in lake-derived biogenic constituents, and interpreted as a seismite, and a lighter-colored type, enriched in catchment-derived constituents, interpreted as a flood layer. Comparison of our ¹³⁷Cs-determined layer ages with a catalog of twentieth century earthquakes shows that an earthquake on the Motagua fault in 1976 generated a conspicuous darker-colored turbidite and slumped deposits in separate parts of the lake. The entire earthquake inventory further reveals that mass movements in the lake are triggered at Modified Mercalli Intensities higher than V. Tropical cyclonic depressions known to have affected the lake area had limited effect on the lake, including Hurricane Mitch in 1998. One storm however produced a significantly thicker flood layer in the 1940s. This storm is reportedly the only event to have generated widespread slope failures in the lake catchment. It is thus inferred that abundant landsliding provided large amounts of concentrated sediment to the lake, through hyperpycnal flows.     

Origin and significance of poikilitic and mosaic peridotite xenoliths in the western Pannonian Basin: geochemical and petrological evidences

Peridotite xenoliths erupted by alkali basaltic volcanoes in the western Pannonian Basin can be divided into two fundamentally contrasting groups. Geochemical characteristics of the abundant protogranular, porphyroclastic and equigranular nodules suggest that these samples originate from an old consolidated and moderately depleted lithospheric mantle domain. In contrast, the geochemical features of the worldwide rare, but in the Pannonian Basin relatively abundant, poikilitic xenoliths attest to a more complex evolution. It has been argued that the origin of the peculiar texture and chemistry may be intimately linked to melt/rock reactions at successively decreasing liquid volumes in a porous melt flow system. The most likely site where such reactions can take place is the asthenosphere–lithosphere boundary. In this context, poikilitic xenoliths may provide petrological and geochemical evidence for reactions between magmatic liquids issued from the uprising asthenosphere and the solid mantle rocks of the lithosphere. These reactions are important agents of the thermal erosion of the lithosphere; thus, they could have considerably contributed to the thinning of the lithosphere in the Pannonian region. We suggest that in the Pannonian Basin, there could be a strong relation between the unusual abundance of poikilitic mantle xenoliths and the strongly eroded lithosphere.     

Warm‐temperate,marine, carbonate sedimentation in an Early Miocene,tide‐influenced,incised valley; Provence,south‐east France

The Saumane‐Venasque compound palaeovalley succession accumulated in a strongly tide‐influenced embayment or estuary. Warm‐temperate normal marine to brackish conditions led to deposition of extensive cross‐bedded biofragmental calcarenites. Echinoids, bryozoans, coralline algae, barnacles and benthic foraminifera were produced in seagrass meadows, on rocky substrates colonized by macroalgae and within subaqueous dune fields. There are two sequences, S1 and S2, the first of which contains three high‐frequency sequences (S1a, S1b and S1c). Sequence 1 is largely confined to the palaeovalley with its upper part covering interfluves. Each of these has a similar upward succession of deposits that includes: (i) a basal erosional surface that is bored and glauconitized; (ii) a discontinuous lagoonal lime mudstone or wackestone; (iii) a thin conglomerate generated by tidal ravinement; (iv) a transgressive systems tract series of cross‐bedded calcarenites; (v) a maximum flooding interval of argillaceous, muddy quartzose, open‐marine limestones; and (vi) a thin highstand systems tract of fine‐grained calcarenite. Tidal currents during stages S1a, S1b and S1c were accentuated by the constricted valley topography, whereas basin‐scale factors enhanced tidal currents during the deposition of S2. The upper part of the succession in all but S1c has been removed by later erosion. There is an overall upward temporal change with quartz, barnacles, encrusting corallines and epifaunal echinoids decreasing but bryozoans, articulated corallines and infaunal echinoids increasing. This trend is interpreted to be the result of changing oceanographic conditions as the valley was filled, bathymetric relief was reduced, rocky substrates were replaced as carbonate factories by seagrass meadows and subaqueous dunes, and the setting became progressively less confined and more open marine. These limestones are characteristic of a suite of similar cool‐water calcareous sand bodies in environments with little siliciclastic or fresh water input during times of high‐amplitude sea‐level change wherein complex inboard antecedent topography was flooded by a rising ocean.