Computing cross-isotherm volume transports from ocean temperature observations and surface heat fluxes,with application to the Barents Sea inflow

A method for determining the cross-isotherm ocean transport from surface heat flux and ocean temperature data is derived. By computing the volume flux through the isotherm that extend from 19°E, 74°N to the eastern part of the Kola Peninsula, the flow through the western entrance of the Barents Sea south of 74°N is estimated. Using three different surface heat flux datasets, the inflow is found to range from 2.9 to 4.5 Sv in winter (October–March) and from 0.4 to 1.4 Sv in summer (April–September; 1 Sv=10⁶ m³ s⁻¹). The seasonal variations are stronger than indicated by results from direct current measurements, probably because the seasonal cycle of the surface heat fluxes is overestimated along the considered isotherm. The annual mean inflow ranges from 1.9 to 2.2 Sv during a cold period (1986–1988), and from 2.4 to 3.0 Sv during a warm period (1990–1992), close to reported observations.     

A Compilation of Radiocarbon Dates from Disko Bugt,Central West Greenland/Meteorological Observations in 1996 at the Arctic Station,Qeqertarsuaq (Godhavn), Central West Greenland/A Discussion on Pingos in Mellemfjord,Disko, Central West Greenland/Open System Pingos in Mellemfjord,Disko, Central West Greenland: A Reply to Gurney and Worsley

188 new and previously published radiocarbon dates on Holocene material from Disko Bugt, central West Greenland, are presented together with relevant informations (laboratory number, place name, dated material, geografic coordinates, altitude and δ¹³C-value) about the dates.

In October 1990 an automatic weather station was established at the Arctic station (65 °15′N,53 °31′W), Qeqertarsuaq (Godhavn), Central West Greenland. The Station register parameters each 20 min., and the parameters have been described in an earlier paper in this journal by Nielsen et al. (1995). The present paper summarises main points of the climate during 1996.

Open system, or more correctly, hydraulic pingos, are genetically poorly understood. A continuing problem concerns their need for a perennial groundwater supply (intra- or sub-permafrost). This has to be maintained despite the existence of continuous permafrost in many areas where they are located. Recent work on Disko Island has suggested a new type of hydraulic pingo developing only in a “marsh environment”. It is argued that the marsh setting is not relevant to the formation of these features and that they are simply hydraulic pingos.

Abstract

A group of marsh initiated open system pingo remnants from the Iterdlagssûp kûgssua valley mouth, in Mellemfjord, Disko Island, Central West Greenland was described in Christiansen (1995). Gurney and Worsley (1997) state that the location of this group of pingo remnants in the Iterdlagssûp kûgssua valley mouth is of no relevance to their genesis, and that they presumably were the result of an assumed late Holocene sea level regression, causing permafrost to be established in the valley bottom. In this reply the arguments by Gurney and Worsley (1997) on the Iterdlagssûp kûgssua valley pingos are commented, and it is argued by way of sea level information, frost penetration and water supply that the special setting must indeed have caused pingo initiation and growth. Furthermore, the area has experienced a relative sea level rise during the late Holocene.     

Green space planning and land use: An assessment of urban regional and green structure planning in Greater Copenhagen

Geografisk Tidsskrift, Danish Journal of Geography 106(2):7–20, 2006

In its Regional Plan of 2005, The Greater Copenhagen Authority (abbreviated as “HUR” in Danish) places special emphasis on the future recreational values associated with the regional green structure. In this paper, the development of the urban green structure in Greater Copenhagen is elaborated upon, focusing on land use changes and the effectiveness of regionally coordinated planning measures. EU MOLAND data are used to analyse the development of the region's green structure during the period 1954 to 1998. Analysis of two “green wedges” within the green structure illustrates that the development of the green recreational areas is the result of both formal and more informal planning initiatives. Development has shown equal phases that correspond to the applied regional planning measures and the general economic conditions. However, local preferences in the involved municipalities likewise have played an important role and have resulted in different urbanisation pressure within the two wedges. Land use has transformed from an agricultural to a primarily recreational landscape. In some areas, however, urbanisation pressure has resulted in residential and green industrial areas instead of the planned recreational land use. Based on its historical development it is concluded that future preservation and development of the green structure in Greater Copenhagen requires regional planning measures to be incorporated into municipal plans. In this way the increasingly independent municipalities will comply to objectives of the Regional Plan 2005.     

Meteorological Observations 2002 at the Arctic Station,Qeqertarsuaq (69°15'N), Central West Greenland

An automatic meteorological station has been operating at the Arctic Station (69°15'N, 53°31'W) in West Greenland since 1990. This paper summarises meteorological parameters during 2002, including snow cover, ground temperatures and active layer development, and air temperatures at the Station during the last 12 years are compared to large scale trends during the last century.

A compilation of 93 sedimentation rate determinations based on ²¹⁰Pb dating has been carried out for the North Sea-Baltic Sea transition area from a database containing 165 determinations carried out by Danish institutions. In the depositional parts of the area sedimentation rates generally range 25–6403 g m^?2 y^?1. An extreme rate of 13351 g m^?2 y^?1 is observed on a station in the Skagerrak. Sedimentation rates significantly increase with depth indicating that the Skagerrak and northern parts of the Kattegat as well as the deep basins in the Baltic Sea act as depocentres for fine-grained sediments. Apparently, sedimentation rates have increased in recent years.     

Experimental estimation of velocities and anisotropy of a series of Swedish crystalline rocks and ores

To provide a guide for future deep (<1.5 km) seismic mineral exploration and to better understand the nature of reflections imaged by surface reflection seismic data in two mining camps and a carbonatite complex of Sweden, more than 50 rock and ore samples were collected and measured for their seismic velocities. The samples are geographically from the northern and central parts of Sweden, ranging from metallic ore deposits, meta‐volcanic and meta‐intrusive rocks to deformed and metamorphosed rocks. First, ultrasonic measurements of P‐ and S‐wave velocities at both atmospheric and elevated pressures, using 0.5 MHz P‐ and S‐wave transducers were conducted. The ultrasonic measurements suggest that most of the measured velocities show positive correlation with the density of the samples with an exception of a massive sulphide ore sample that shows significant low P‐ and S‐wave velocities. The low P‐ and S‐wave velocities are attributed to the mineral texture of the sample and partly lower pyrite content in comparison with a similar type sample obtained from Norway, which shows significantly higher P‐ and S‐wave velocities. Later, an iron ore sample from the central part of Sweden was measured using a low‐frequency (0.1–50 Hz) apparatus to provide comparison with the ultrasonic velocity measurements. The low‐frequency measurements indicate that the iron ore sample has minimal dispersion and attenuation. The iron ore sample shows the highest acoustic impedance among our samples suggesting that these deposits are favourable targets for seismic methods. This is further demonstrated by a real seismic section acquired over an iron ore mine in the central part of Sweden. Finally, a laser‐interferometer device was used to analyse elastic anisotropy of five rock samples taken from a major deformation zone in order to provide insights into the nature of reflections observed from the deformation zone. Up to 10% velocity‐anisotropy is estimated and demonstrated to be present for the samples taken from the deformation zone using the laser‐interferometery measurements. However, the origin of the reflections from the major deformation zone is attributed to a combination of anisotropy and amphibolite lenses within the deformation zone.     

Modelling thermal transients from magmatic underplating—an example from the Vøring margin (NE Atlantic)

The thermal impact of several kilometre-thick magmatic underplating in the lower continental crust is studied with analytical and numerical methods. Simple analytical solutions are derived for the thermal transient in the case of an infinite depth below the underplate and also for the case of a finite depth (down to the asthenosphere). It is shown that these solutions lead to simple approximations for when the transient surface heat flow is at its maximum, what the maximum is, and for how long the transient lasts. Even though these solutions assume that the underplate is emplaced instantaneously, they are useful in the interpretation of underplating over finite time spans. A numerical scheme is suggested for the modelling of underplating that handles both short time intervals as well as long intervals. The scheme treats magmatic underplating in a mass and energy conservative manner, and it is compared against the analytical solutions. Finally, the analytical and numerical results for thermal transients are applied to a transect from the Vøring margin (NE Atlantic), with respect to various degrees of early Cenozoic magmatic intrusion. It appears that more than half of the lower crustal body (LCB) in the Vøring margin must be magmatic underplating for the vitrinite reflectance to be substantially higher than for the non-magmatic case, where the LCB is assumed to comprise Caledonian crust.     

Indicators of road network vulnerability to storm-felled trees

In this paper, we exemplify the use of simple indicators of wind storm vulnerability of the road network that can be derived from existing geographic datasets. We point out the possible utilization of the datasets, applying GIS techniques, for highlighting road sections that, due to adjacency of high forest stands, are sensitive to closure by storm-felled trees. Indicators reflecting the reduced access to different areas or to the population in need of emergency aid can be derived based on the parameter tree height along roads and road network analysis. As a case in this study, the methodology is applied to elderly people (+80 years) with possible need of daily care at home following a severe storm. A comparison to the extreme 2005 storm felling in southern Sweden reveals that only limited estimates of road network disruption due to storm-felled trees are possible using the indicators, as other factors, for example, wind direction, which determine the exact impact of a particular storm are not taken into account. However, the indicators and network analysis also provide a possibility to draw attention to locations where disruptions of the road network would have significant effects on the accessibility to large surrounding areas. Potential critical road closures can be identified and preventive measures considered locally at these points.     

Phytoplankton life cycle transformations lead to species-specific effects on sediment processes in the Baltic Sea

In order to study the sediment response to different addition of organic matter, we added cultures of the dinoflagellates Scrippsiella hangoei and Woloszynskia halophila and the diatom Pauliella taeniata to aquaria containing natural sediment. The biomass added was 1550–3260 mg C m⁻², and in the control, no biomass was added (n=3). Oxygen profiles at the sediment–water interface and inorganic nutrients in the near bottom water were determined once a week. In the additions of P. taeniata and W. halophila the sediment quickly became anoxic, and subsequently there was a flux of >1 mmol PO₄³⁻ m⁻² d⁻¹ out of the sediment in these treatments. The majority of the released P came from P stored in the sediment and not from the organic phosphorus added. The result was very different for the S. hangoei addition. This species underwent a life cycle change to form temporary cysts. During this process there was a net uptake of nutrients. After the formation of cysts the concentration of inorganic nutrient was similar to that of the control. Cysts generally survive for long periods in the sediment (months to years) before germinating, but can also be permanently buried in the sediment. The novel idea presented here is that the phytoplankton composition may directly affect sediment processes such as oxygen consumption and phosphorus release, through species-specific life cycle changes and yields of resting stages produced prior to sedimentation. This can be an important aspect of nutrient cycling in eutrophic waters, like the Baltic Sea, where there is large year-to-year difference in the amount of resting stages settling at the sea floor, mainly due to differences in abundance of diatoms and dinoflagellates during the spring bloom. If yields of resting stages change, e.g. due to changes in the phytoplankton community, it may lead to alterations in the biogeochemical cycling of nutrients.     

Improving modelling and inversion in refraction seismics with a first-order Eikonal solver

A first-order Eikonal solver is applied to modelling and inversion in refraction seismics. The method calculates the traveltime of the fastest wave at any point of a regular grid, including head waves as used in refraction. The efficiency, robustness and flexibility of the method give a very powerful modelling tool to find both traveltimes and raypaths. Comparisons with finite-difference data show the validity of the results. Any arbitrarily complex model can be studied, including the exact topography of the surface, thus avoiding static corrections. Later arrivals are also obtained by applying high-slowness masks over the high-velocity zones. Such an efficient modelling tool may be used interactively to invert for the model, but a better method is to apply the refractor-imaging principle of Hagedoorn to obtain the refractors from the picked traveltime curves. The application of this principle has already been tried successfully by previous authors, but they used a less well-adapted Eikonal solver. Some of their traveltimes were not correct in the presence of strong velocity variations, and the refractor-imaging principle was restricted to receiver lines along a plane surface. With the first-order Eikonal solver chosen, any topography of the receiving surface can be considered and there is no restriction on the velocity contrast. Based on synthetic examples, the Hagedoorn principle appears to be robust even in the case of first arrivals associated with waves diving under the refractor. The velocities below the refractor can also be easily estimated, parallel to the imaging process. In this way, the model can be built up successively layer by layer, the refractor-imaging and velocity-mapping processes being performed for each identified refractor at a time. The inverted model could then be used in tomographic inversions because the calculated traveltimes are very close to the observed traveltimes and the raypaths are available.