Metallophilic fungi research: an alternative for its use in the bioremediation of hexavalent chromium

Contamination by hexavalent chromium has had a large impact on modern society and human health. This problem is a consequence of its great industrial applicability to several products and processes. Short-term exposure to hexavalent chromium can cause irritation, ulceration in skin and stomach and in addition to cancer, dermatitis, and damage to liver, renal circulation and nervous tissues, with even death being observed in response to long-term exposures. Many techniques have been used for the remediation of this pollutant, including physical and chemical approaches and, in more recent years, biological methods. Filamentous fungi isolated from contaminated sites exhibit a significant tolerance to heavy metal; hence, they are an important source of microbiota capable of eliminating hexavalent chromium from the environment. However, these microorganisms can do so in different ways, including biosorption, bioreduction, and bioaccumulation, among others. In this review, we explore several of the most documented mechanisms that have been described for fungi/hexavalent chromium interactions and their potential use in bioremediation.     

Provenance of sandstones from the Neoproterozoic Bombouaka Group of the Volta Basin,northeastern Ghana

The provenance and tectonic setting of sandstones from the Bombouaka Group of the Voltaian Supergroup, in the northeastern part of Ghana, have been constrained from their petrography and whole-rock geochemistry. Modal analysis carried out by point-counting sandstone samples indicates that they are quartz arenites. The index of compositional variability values and SiO₂/Al₂O₃, Zr/Sc, and Th/Sc values indicates that the sediments are mature. The sandstones are depleted in CaO and Na₂O. They are, however, enriched in K₂O, Ba, and Rb relative to average Neoproterozoic upper crust. These characteristics reflect intense chemical weathering in the source region as proven by high weathering indices (i.e., CIA, PIA, and CIW). In comparison with average Neoproterozoic upper crust, the sandstones show depletion by transition metals and enrichment by high field strength elements. They generally show chondrite-normalized fractionated light rare-earth element (LREE) patterns (average La_N/Sm_N = 4.40), negative Eu anomalies (average Eu/Eu* = 0.61), and generally flat heavy rare-earth elements (HREE) (average Gd_N/Yb_N = 1.13). The sandstones have La/Sc, Th/Sc, La/Co, Th/Co, Th/Cr, and Eu/Eu* ratios similar to those of sandstones derived from felsic source. Mixing calculations using the rare-earth elements (REE) suggests 48% tonalite–trondhjemite–granodiorite and 52% granite as possible proportions for the source of the sandstones. Both the petrographic and whole-rock geochemical data point to a passive margin setting for the sandstones from the Bombouaka Group.     

Application of a 3D photorealistic model for the geological analysis of the Permian carbonates (Khuff Formation) in Saudi Arabia

Three dimensional (3D) photorealistic models of geological outcrops have the potential to enhance the teaching of earth sciences by providing scale models in a virtual reality environment. These models can be run on low-cost desktop computers. Photorealistic models for geological outcrops are a digital illustration of outcrop photographs with either a point cloud representation or Triangular Irregular Network (TIN) mesh of the outcrop surface. The level of detail for these models is dependent on the target resolutions (physical and optical) that were used during data acquisition. In addition, the technique in which the data is rendered as a digital model affects the level of detail that can be observed by the geologists. A colored point cloud representation is suitable for large-scale features, but fine details are lost when the geologist zooms in to view the model close up. In contrast, a photorealistic model that is constructed from photographs draped onto a triangle mesh surface derived from Light Detection and Ranging (LiDAR) point clouds provides a level of detail that is restricted only by the resolution of the photographs.     

Observation of abnormal thermal and infrasound signals prior to the earthquakes: a study on Bonin Island earthquake M7.8 (May 30, 2015)

Scientists from all over the world try to incorporate multi-disciplinary precursors to forecast the earthquake on a short-term basis. The authors here have analyzed outgoing longwave radiations acquired from polar-orbiting National Oceanic and Atmospheric Adminstration (NOAA) satellites and long-period infrasound waves recorded by the ground observatories in China prior to the recent Bonin Islands, Japan region earthquake which occurred on May 30, 2015 with the magnitude of 7.8. The anomalous outgoing longwave radiation (OLR) was observed on May 15, 2015, and was recorded by “NOAA 18” satellite during its “night pass.” Similarly, an abnormal infrasound spike was recorded at the Beijing station on May 17, 2015. The delay in observing anomalous infrasound waves compared to the OLR anomaly is due to these low-frequency waves traveling at low speed with the velocity range of 10–15 m/s. From the analysis of the results, it can be inferred that there is a substantial relation between parameters like OLR and infrasound waves; hence, the authors conclude that it is possible to forecast the earthquake on a short-term basis with reasonable accuracy.     

Chemometric analysis of <Superscript>137</Superscript>Cs activity and heavy metals distribution in the Tatras’ soil

The goal of the paper was to determine the activity of ¹³⁷Cs and ⁴⁰K radionuclides as well as heavy metals Zn, Cr, Pb in soil samples taken from the Tatra National Park in the south of Poland. The samples were obtained as cores (10 cm in diameter) from the top 10-cm layer of the soil. Each sample was divided into three subsamples (a, b and c), where a was the subsample closest to the surface and c was the deepest one. Activity of the radionuclides was determined by means of gamma spectrometry, while analysis of heavy metals was performed (after microwave digestion) using atomic absorption spectrometry technique. The highest activity of cesium-137 was detected (5112 ± 120 Bq kg^?1) in the “a” layer of the core with the peak concentration of cesium-137 (14,452 ± 278 Bq m^?2) in the whole soil core. The highest detected concentration of heavy metals was: Zn—52.8 ± 4.4 mg kg^?1, Pb—260.1 ± 9.4 mg kg^?1, Cr—52.8 ± 4.4 mg kg^?1, respectively. Cluster analysis and principal component analysis were used to examine the obtained data. Application of statistical analysis tools allowed specifying the interdependencies between the examined variables.     

Performance and environmental impact of a turbojet engine fueled by blends of biodiesels

Depletion of conventional fuels, concerns about environmental pollution and the tightening of exhaust emission legislations are the main reasons for increasing research on alternative fuels produced from agricultural feedstock. In this study, biodiesel fuels produced from cotton and corn vegetable oils are investigated as renewable fuels for a gas turbine engine for aviation. The biodiesel fuels are defined as cotton methyl ester (CTME) and corn methyl ester. The performance characteristics and exhaust emissions of the gas turbine engine are investigated when the engine fueled with three blends of 10%(B10), 20%(B20) and 50%(B50) of biodiesel/JetA-1 by volume. The biodiesel fuels were produced using transesterification process and characterized according to ASTM biodiesel specifications. Chemical and physical properties show a real potential of using biodiesel blends as an alternative for JetA-1. The measured engine performance parameters and exhaust emissions are compared with that of pure JetA-1 over a range of throttle setting. The gas turbine engine used in this study is equipped with pressure, flow, temperature, thrust and speed sensors that connected to data acquisition system and control unit in addition to exhaust gas analyzer. The experimental results show that biodiesel fuels can be used up to blend of 50% with JetA-1 in gas turbine engines with slight enhancement in engine performance and significant improvements in exhaust emissions. The engine static thrust is increased with 2% for B50 at lower and medium engine speeds and decreased with 11% at high engine speed compared to conventional JetA-1 fuel. The thrust-specific fuel consumption for biodiesel blends is lower than that for regular JetA-1 fuel. The gas turbine engine efficiency is increased for biodiesel blends by 14% compared to JetA-1, and this is reported for CTME B50. For oxygen concentration in exhaust gases emissions, the higher the biodiesel blend, the higher the O₂ concentration in the exhaust compared with JetA-1 fuel. The O₂ level increased by 6% for biodiesel blend of B50 compared to JetA-1 fuel. The emissions of CO and HC emissions decreased by 5 and 37%, respectively, compared with conventional JetA-1. Additionally, the biodiesel blends achieve a higher CO₂ and NO_x emissions with 11 and 27%, respectively, compared to JetA-1. The sulfur dioxide SO₂ decreased by 75% compared to the regular JetA-1 fuel.     

A subsidiary fast-diffusing substitution mechanism of Al in forsterite investigated using diffusion experiments under controlled thermodynamic conditions

Diffusion of Al in synthetic forsterite was studied at atmospheric pressure from 1100 to 1500 °C in air along [100] with activities of SiO₂, MgO and Al₂O₃ (a_SiO2, a_MgO and a_Al2O3) buffered. At low a_SiO2, the buffer was forsterite + spinel + periclase (fo + sp + per) at all temperatures, while at high a_SiO2 and subsolidus conditions a variety of three-phase assemblages containing forsterite and two other phases from spinel, cordierite, protoenstatite or sapphirine were used at 1100–1350 °C. Experiments at high a_SiO2 and 1400 °C used forsterite + protoenstatite + melt (fo + en + melt), and at 1500 °C, fo + melt. The resulting diffusion profiles were analysed by LA–ICP–MS in scanning mode. Diffusion profiles in the high a_SiO2 experiments were generally several hundred microns in length, but diffusion at low a_SiO2 was three orders of magnitude slower than in high a_SiO2 experiments carried out at the same temperature, producing short profiles only a few microns in length and close to the spatial resolution of the analytical method. Interface concentrations of Al in the forsterite, obtained by extrapolating the diffusion profiles to the crystal/buffer interface, were only a fraction of those expected at equilibrium, and varied among the differing buffer assemblages according to (a_Al2O3)^1/2 and (a_SiO2)^3/4, pointing to the substitution of Al in forsterite by an octahedral-site, vacancy-coupled (OSVC) component with the stoichiometry Al _4/3 ³⁺ vac_2/3SiO₄, whereas the main substitution expected from previous equilibrium studies would be the coupled substitution of 2 Al for Mg + Si, giving the stoichiometry MgAl₂O₄. It is proposed that this latter substitution is not seen on the length scales of the present experiments because it requires replacement of Si by Al on tetrahedral sites, and is accordingly rate-limited by the slow diffusivity of Si. Instead, diffusion of Al by the OSVC mechanism is relatively fast, and at high a_SiO2, even faster than Fe–Mg interdiffusion.     

Thermodynamic controls on element partitioning between titanomagnetite and andesitic–dacitic silicate melts

Titanomagnetite–melt partitioning of Mg, Mn, Al, Ti, Sc, V, Co, Ni, Cu, Zn, Ga, Zr, Nb, Mo, Hf and Ta was investigated experimentally as a function of oxygen fugacity (fO₂) and temperature (T) in an andesitic–dacitic bulk-chemical compositional range. In these bulk systems, at constant T, there are strong increases in the titanomagnetite–melt partitioning of the divalent cations (Mg²⁺, Mn²⁺, Co²⁺, Ni²⁺, Zn²⁺) and Cu²⁺/Cu⁺ with increasing fO₂ between 0.2 and 3.7 log units above the fayalite–magnetite–quartz buffer. This is attributed to a coupling between magnetite crystallisation and melt composition. Although melt structure has been invoked to explain the patterns of mineral–melt partitioning of divalent cations, a more rigorous justification of magnetite–melt partitioning can be derived from thermodynamic principles, which accounts for much of the supposed influence ascribed to melt structure. The presence of magnetite-rich spinel in equilibrium with melt over a range of fO₂ implies a reciprocal relationship between a(Fe²⁺O) and a(Fe³⁺O_1.5) in the melt. We show that this relationship accounts for the observed dependence of titanomagnetite–melt partitioning of divalent cations with fO₂ in magnetite-rich spinel. As a result of this, titanomagnetite–melt partitioning of divalent cations is indirectly sensitive to changes in fO₂ in silicic, but less so in mafic bulk systems.     

Impacts of SW Monsoon on Phytoplankton Community Structure Along the Western Coastal BOB: an HPLC Approach

The major Indian rivers bring significant amount of freshwater along with inorganic nutrients and sediment load in to the northern Bay of Bengal (BOB) during the southwest monsoon (SWM); the southern bay does not experience equal freshening. This contrasting pattern may considerably impact the physicochemical features and phytoplankton community composition in this bay and was investigated during a coastal cruise during the SWM covering eight river plumes from both northern and southern bay; phytoplankton pigments and physicochemical parameters were analysed from different depths (0, 10, 25, and 50 m). Significant freshening, stratification and warmer waters were noticed in the northern bay relative to its southern part. Phytoplankton pigment analysis and diagnostic pigment-based size class analysis revealed the dominance of microphytoplankton (mainly diatoms) in the northern bay and were mostly confined to the surface waters. Their abundance was positively correlated with dissolved silicate (DSi) concentrations and inversely with salinity. Nanophytoplankton and picophytoplankton (prymnesiophytes, chrysophytes and cyanophytes) were mostly noticed in the subsurface waters and dominated the southern bay. This finding suggests that the dominance of microphytoplankton in the northern bay may significantly contribute to higher particle flux which has been reported earlier. Therefore, any modification in future river discharge, which is in turn related to the intensity of Indian summer monsoon, will alter the phytoplankton community structure in the coastal BOB and may be further cascaded to the other vital ecosystem components like fisheries resources, organic carbon export flux and benthic production.     

The Role of Sediment Dynamics for Inorganic Accretion Patterns in Southern California’s Mediterranean-Climate Salt Marshes

Salt marsh resilience to sea-level rise depends on marsh plain elevation, tidal range, subsurface processes, as well as surface accretion, of which suspended-sediment concentration (SSC) is a critical component. However, spatial and temporal patterns of inorganic sedimentation are poorly quantified within and across Salicornia pacifica (pickleweed)-dominated marshes. We compared vertical accretion rates and re-examined previously published suspended-sediment patterns during dry-weather periods at Seal Beach Wetlands, which is characterized by a mix of Spartina foliosa (cordgrass) and pickleweed, and for Mugu Lagoon, where cordgrass is rare. Mugu Lagoon occurs higher in the tidal frame and receives terrigenous sediment from an adjacent creek. Feldspar marker horizons were established in winter 2013–2014 to measure accretion. Accretion rates at Seal Beach Wetlands and Mugu Lagoon were 6 ± 0.5 mm/year (mean ± SE) and 2 ± 0.3 mm/year. Also, the estimated sediment flux (g/year) across the random feldspar plots was 3.5 times higher at Seal Beach Wetlands. At Mugu Lagoon, accretion was higher near creeks, although not statistically significant. Dry-weather SSC showed similar concentrations at transect locations across sites. During wet weather, however, SSC at Mugu Lagoon increased at all locations, with concentrations decaying farther than 8 m from tidal creek edge. Based on these results from Mugu Lagoon, we conclude accretion patterns are set by infrequent large flooding events in systems where there is a watershed sediment source. Higher accretion rates at Seal Beach Wetlands may be linked to lower-marsh elevations, and thus more frequent inundation, compared with Mugu Lagoon.