Volume estimation of the 1998 flank collapse at Casita volcano,Nicaragua: a comparison of photogrammetric and conventional techniques

In October 1998 a precipitation‐triggered flank collapse occurred at Casita volcano, Nicaragua, leading to a devastating lahar. In this paper the failure volume was calculated using a range of methods. Several pre‐ and post‐failure digital elevation models (DEMs) were created, based on photogrammetric, cartometric and surveying data. The wide range in resulting volumes prompted an assessment of the accuracies and potential problems associated with each of the datasets and techniques used. The best estimate for the failure volume is 1·6 × 10⁶ m³. It is based on a vegetation‐corrected pre‐failure DEM, generated using automated digital photogrammetry, and a post‐failure surface based on a field survey carried out with a Total Station. The volume figure is approximately an order of magnitude higher than values reported in previous publications, all of which are based solely on field estimates. This demonstrates that values reported in the literature, if they are not based on rigorous quantitative analysis, must be regarded with caution. Copyright © 2002 John Wiley & Sons, Ltd.     

The abundance of volatiles in Hawaiian tholeiitic submarine basalts

High-temperature mass spectrometric studies have been made to determine the distribution of volatiles within glassy rims of submarine pillow basalts dredged from the east rift zone of Kilauea volcano, Hawaii. The CO₂/H₂O mole ratio for glass-vapor inclusions within olivine phenocrysts in the glassy rims is greater than 30 : 1 compared to 0.06 for matrix glasses. Enclosing matrix glasses contain 0.53–0.74 wt.% H₂O, 0.02–0.04 wt.% carbon, 0.08–0.12 wt.% sulfur, 0.012–0.028 wt.% chlorine and 0.012–0.077 wt.% fluorine.     

Volatiles in submarine volcanic rocks from the Mariana Island arc and trough

High temperature mass spectrometric analyses of glasses from quenched pillow rims of andesites dredged from 1170 m water depth in the northern portion of the Mariana Island arc indicate substantially less H₂O (~ 1 wt.%) and more CO₂ (~ 0.24 wt.%) than previously reported for volcanic arc rocks. Glass-vapor inclusions within plagioclase phenocrysts from quenched rims have $\text{CO}{}_2\text{H}{}_2\text{O}$ ratios of 1:1. These results are similar to analyses of basaltic samples from the Mariana Trough (a back-arc basin). Generally, F and Cl contents are higher and S lower in the arc rocks compared to the samples from the back-arc basin. These results favor models for the production of island arc magmas which involve melting of the subducted slab, rather than just melting of the overlying mantle wedge because of the high volatile content needed to produce island arc magmas from peridotite (10–15 wt.%). The trough samples, although similar in non-volatile composition to mid-ocean ridge rocks, have much higher H₂O. somewhat higher CO₂ and lower S contents. Either near surface addition of voiatiles has enriched the magmas or H₂O must be a more important component in the generation and evolution of back-arc basin lavas than in the genesis of mid-ocean ridge basalts.     

Petrology of the uppermost upper mantle deduced from spinel-lherzolite and harzburgite nodules at Calton Hill,Derbyshire

A suite of protogranular- to porphyroclastic-textured spinel lherzolites and harzburgites from the Lower Carboniferous ankaramite vent at Calton Hill has been investigated for trends of modal variation and mineral composition and for variation in calculated bulk composition. The results indicate that the nodules are accidental xenoliths derived from a source at approximately 45 km depth and at 950 °C, i.e. within the mantle but above the Low Velocity Zone. The lherzolites and harzburgites have a complex petrogenetic history involving initital formation as residues from partial melting of peridotite; it is proposed that the residues were then admixed with veins of pyroxenite, followed by a complex series of metamorphic cycles of mineral reaction and exsolution, deformation, recrystallization and annealing and finally by rupture and incorporation in the ankaramite. During ascent to the surface chrome diopside in some nodules has undergone partial, incongruent melting to form a less sodic pyroxene and a soda-rich basalt melt.     

Rare earths in the Leadville Limestone and its marble derivates

Samples of unaltered and metamorphosed Leadville Limestone (Mississippian, Colorado) were analyzed by neutron activation for ten rare-earth elements (REE). The total abundance of the REE in the least-altered limestone is 4–12 ppm, and their distribution patterns are believed to be dominated by the carbonate minerals. The abundances of the REE in the marbles and their sedimentary precursors are comparable, but the distribution patterns are not. Eu is enriched over the other REE in the marbles, and stratigraphically upward in the formation (samples located progressively further from the heat source), the light REE become less enriched relative to the heavy REE. The Eu anomaly is attributed to its ability, unique among the REE, to change from the 3+ to 2+ oxidation state. Whether this results in preferential mobilization of the other REE or whether this reflects the composition of the pore fluid during metamorphism is unknown. Stratigraphically selective depletion of the heavy REE may be attributed to more competition for the REE between fluid and carbonate minerals in the lower strata relative to the upper strata. This competition could have been caused by changes in the temperature of the pore fluid or to the greater resistance to solution of the dolomite in the lower parts of the formation than the calcite in the upper parts.     

The Amsterdam-St. Paul volcanic province,and the formation of low Al tholeiitic andesites

The island of St. Paul in the Indian Ocean is located on the axis of the southeastern branch of the Indian Ocean Rise, as is the similar volcano of Amsterdam, 80 km to the north. Both volcanoes and possibly part of the local ridge are formed of a high-alumina plagioclase tholeiite making this a distinctive volcanic province. Lavas with Al₂O₂ contents of 12 to 22% are directly related by plagioclase fractionation. Residual rocks are a distinctive low silica, low alumina, potassic andesite with andesine and even olligoclase feldspar. Parallel lines of evolution exist in the sea floor plagioclase tholeiites, which differ only in slightly lower tenor of Sr and potassium group elements, and in the Steens Mountain tholeiites of Oregon, which differ in their significantly higher Sr and K group elements     

Accuracy assessment of real-time kinematics (RTK) measurements on unmanned aerial vehicles (UAV) for direct geo-referencing

ABSTRACT

Geospatial information acquired with Unmanned Aerial Vehicles (UAV) provides valuable decision-making support in many different domains, and technological advances coincide with a demand for ever more sophisticated data products. One consequence is a research and development focus on more accurately referenced images and derivatives, which has long been a weakness especially of low to medium cost UAV systems equipped with relatively inexpensive inertial measurement unit (IMU) and Global Navigation Satellite System (GNSS) receivers. This research evaluates the positional accuracy of the real-time kinematics (RTK) GNSS on the DJI Matrice 600 Pro, one of the first available and widely used UAVs with potentially surveying-grade performance. Although a very high positional accuracy of the drone itself of 2 to 3 cm is claimed by DJI, the actual accuracy of the drone RTK for positioning the images and for using it for mapping purposes without additional ground control is not known. To begin with, the actual GNSS RTK position of reference center (the physical point on the antenna) on the drone is not indicated, and uncertainty regarding this also exists among the professional user community. In this study the reference center was determined through a set of experiments using the dual frequency static Leica GNSS with RTK capability. The RTK positioning data from the drone were then used for direct georeferencing, and its results were evaluated. Test flights were carried out over a 70 x 70 m area with an altitude of 40 m above the ground, with a ground sampling distance of 1.3 cm. Evaluated against ground control points, the planimetric accuracy of direct georeferencing for the photogrammetric product ranged between 30 and 60 cm. Analysis of direct georeferencing results showed a time delay of up to 0.28 seconds between the drone GNSS RTK and camera image acquisition affecting direct georeferencing results.     

Detection of seismic façade damages with multi-temporal oblique aerial imagery

ABSTRACT

Remote sensing images have long been recognized as useful for the detection of building damages, mainly due to their wide coverage, revisit capabilities and high spatial resolution. The majority of contributions aimed at identifying debris and rubble piles, as the main focus is to assess collapsed and partially collapsed structures. However, these approaches might not be optimal for the image classification of façade damages, where damages might appear in the form of spalling, cracks and collapse of small segments of the façade. A few studies focused their damage detection on the façades using only post-event images. Nonetheless, several studies achieved better performances in damage detection approaches when considering multi-temporal image data. Hence, in this work a multi-temporal façade damage detection is tested. The first objective is to optimally merge pre- and post-event aerial oblique imagery within a supervised classification approach using convolutional neural networks to detect façade damages. The second objective is related to the fact that façades are normally depicted in several views in aerial manned photogrammetric surveys; hence, different procedures combining these multi-view image data are also proposed and embedded in the image classification approach. Six multi-temporal approaches are compared against 3 mono-temporal ones. The results indicate the superiority of multi-temporal approaches (up to ~25% in f1-score) when compared to the mono-temporal ones. The best performing multi-temporal approach takes as input sextuples (3 views per epoch, per façade) within a late fusion approach to perform the image classification of façade damages. However, the detection of small damages, such as smaller cracks or smaller areas of spalling, remains challenging in this approach, mainly due to the low resolution (~0.14 m ground sampling distance) of the dataset used.