Video‐based gravel transport measurements with a flume mounted light table

The study of bedload transport processes is constrained by an inability to monitor the mass, volume and grain size distribution of sediment in transport at high temporal frequencies. Building upon a previously published design, we have integrated a high‐resolution (1392 × 1024 pixels) video camera with a light table to continuously capture images of 2–181 mm material exiting a flume. The images are continuously recorded at a rate of 15 to 20 frames per second and are post‐processed using LabView^(?) software, yielding continuous grain‐size‐specific transport information on a per second basis. The video capture rate is sufficient to record multiple images of each grain leaving the flume so that particle velocities can be measured automatically. No manual image processing is required. After calibration the method is accurate and precise for sediment in the 2 mm through to 45 mm grain size classes compared with other means of measuring bedload. Based on a set of validation samples, no statistically significant difference existed between the D₁₀, D₁₆, D₂₅, D₅₀, D₇₅, D₈₄, D₉₀ and D₉₅ determined by sieving captured samples and the D_i values determined with the system. On average the system overpredicted transport by 4 per cent (n = 206, SD = 42%). This error can be corrected easily by simply weighing the mass of sediment that leaves the flume. The technology is relatively inexpensive and provides high‐resolution data on coarse sediment transport out of a flume. Copyright © 2008 John Wiley & Sons, Ltd.     

Composition isotopique du strontium d'eaux interstitielles extraites de sédiments récents: un argument en faveur de l'homogénéisation isotopique des minéraux argileux

The ${}^{87}\text{Sr}{}^{86}\text{Sr}$ ratio of interstitial waters squeezed from recent sediments of the Pacific Ocean increases from 0.70920 ± 0.00017 (2σ) to 0.70960 ± 0.0023 and 0.70984 ± 0.00040 at 1.50 and 1.60 m depth—reference value for sea water: 0.70910 ± 0.00035. This variation underlines the likely existence of exchanges between the clays and the interstitial environment. The isotopic homogenization of strontium between the clays and their environment, result of these changes, becomes thus a credible phenomenon. This is a new argument for the dating of clays by the $\text{Rb}\text{Sr}$ method.     

Métamorphisme hydrothermal en faciès salins et pénésalins sur l'exemple du complexe salifère de l'extrême Nord Tunisien

Résumé Les roches sédimentaires des formations salifères de l'extrême Nord tunisien ont fréquemment subies une recristallisation ou une dolomitisation notable, à laquelle se superpose souvent un envahissement de minéraux automorphes, quartz et feldspaths principalement. L'étude des inclusions fluides de ces cristaux conduit à des conditions thermométriques de genèse qui dépassent le stade d'une simple diagenèse. Les transformations subies relèvent davantage d'un épimétamorphisme, en milieu aquifère hypersalin, lié à des anomalies thermiques vraisemblablement en rapport avec des manifestations volcaniques.

---

Hydrothermal low grade metamorphism within saline and penesaline facies with reference to the saliferous complex in Northern Tunisia

The sedimentary rocks of saliferous formations in the tunisian far North have gone through frequent recrystallization or a notable dolomitization which an invading of idiomorph minerals mainly made up of quartz and feldspar crystals is frequently added to. Studies carried out on fluid inclusions from these crystals lead thermometric figures clearly exceeding the range of values met with in diagenesis. New paragenesis are best related to low grade metamorphism in aquiferous hypersalted medium bearing relation with thermal anomalies likely connected to volcanism.

     

Influence of the head and tip connection on the seismic performance of micropiles

This paper presents a study of the influence of connection conditions at the head and tip of micropiles on their response to seismic loading. The study is carried using a fully three-dimensional finite element modeling. The soil is assumed to be elastic with Rayleigh damping. The superstructure is modeled by a single degree of freedom system composed of a concentrated mass and a column. The study is carried out for both vertical and inclined micropiles. The results of analyses show that a pinned connection between the micropiles and the cap leads to a reduction in the axial force and bending moment in micropiles, in particular for inclined micropiles. They also show that the embeddement of the tip of micropiles in a stiff substratum layer leads to a dramatic increase in the internal forces in the micropiles.     

Two- and three-dimensional inversions of magnetic anomalies in the MARK area (Mid-Atlantic Ridge 23° N)

Magnetic data collected in conjunction with a Sea Beam bathymetric survey of the Mid-Atlantic Ridge south of the Kane Fracture Zone are used to constrain the spreading history of this area over the past 3 Ma. Two-dimensional forward modeling and inversion techniques are carried out, as well as a full three-dimensional inversion of the anomaly field along a 90-km-long section of the rift valley. Our results indicate that this portion of the Mid-Atlantic Ridge, known as the MARK area, consists of two distinct spreading cells separated by a small, zero-offset transform or discordant zone near 23°10′ N, The youngest crust in the median valley is characterized by a series of distinct magnetization highs which coalesce to form two NNE-trending bands of high magnetization, one on the northern ridge segment which coincides with a large constructional volcanic ridge, and one along the southern ridge segment that is associated with a string of small axial volcanos. These two magnetization highs overlap between 23° N and 23°10° N forming a non-transform offset that may be a slow spreading ridge analogue of the small ridge axis discontinuities found on the East Pacific Rise. The crustal magnetizations in this overlap zone are generally low, although an anomalous, ESE-trending magnetization high of unknown origin is also present in this area. The present-day segmentation of spreading in the MARK area was inherited from an earlier ridge-transform-ridge geometry through a series of small (∼ 10 km) eastward ridge jumps. These small ridge jumps were caused by a relocation of the neovolcanic zone within the median valley and have resulted in an overall pattern of asymmetric spreading with faster rates to the west (14 mm yr⁻¹) than to the east (11 mm yr⁻¹). Although the detailed magnetic survey described in this paper extends out to only 3 Ma old crust, a regional compilation of magnetic data from this area by Schoutenet al. (1985) indicates that the relative positions and dimensions of the spreading cells, and the pattern of asymmetric spreading seen in the MARK area during the past 3 Ma, have characterized this part of the Mid-Atlantic Ridge for at least the past 36 Ma.     

A tephrostratigraphic record for the last glacial–interglacial cycle from Lake Ohrid,Albania and Macedonia

Here we present a tephrostratigraphic record (core Co1202) recovered from the northeastern part of Lake Ohrid (Republics of Macedonia and Albania) reaching back to Marine Isotope Stage (MIS) 6. Overall ten horizons (OT0702‐1 to OT0702‐10) containing volcanic tephra have been recognised throughout the 14.94 m long sediment succession. Four tephra layers were visible at macroscopic inspection (OT0702‐4, OT0702‐6, OT0702‐8 and OT0702‐9), while the remaining six are cryptotephras (OT0702‐1, OT0702‐2, OT0702‐3, OT0702‐5, OT0702‐7 and OT0702‐10) identified from peaks in K, Zr and Sr intensities, magnetic susceptibility measurements, and washing and sieving of the sediments. Glass shards of tephra layers and cryptotephras were analysed with respect to their major element composition, and correlated to explosive eruptions of Italian volcanoes. The stratigraphy and the major element composition of tephra layers and cryptotephras allowed the correlation of OT0702‐1 to AD 472 or AD 512 eruptions of Somma‐Vesuvius, OT0702‐2 to the FL eruption of Mount Etna, OT0702‐3 to the Mercato from Somma‐Vesuvius, OT0702‐4 to SMP1‐e/Y‐3 eruption from the Campi Flegrei caldera, OT0702‐5 to the Codola eruption (Somma‐Vesuvius or Campi Flegrei), OT0702‐6 to the Campanian Ignimbrite/Y‐5 from the Campi Flegrei caldera, OT0702‐7 to the Green Tuff/Y‐6 eruption from Pantelleria Island, OT0702‐8 to the X‐5 eruption probably originating from the Campi Flegrei caldera, OT0702‐9 to the X‐6 eruption of generic Campanian origin, and OT0702‐10 to the P‐11 eruption from Pantelleria Island. The fairly well‐known ages of these tephra layers and parent eruptions provide new data on the dispersal and deposition of these tephras and, furthermore, allow the establishment of a chronological framework for core Co1202 for a first interpretation of major sedimentological changes. Copyright © 2009 John Wiley & Sons, Ltd.     

Expected damage from displacement of slow-moving slides

Facilities such as buildings, highways, railways, bridges, dams and pipelines often are built on natural slopes where the risk of landslides is not low. The vulnerability of these facilities to slow-moving slides has sometimes been underestimated, although the velocity of some classes of slow slides is uncontrollable. More than 50 cases of slow slides were compiled from the literature for this study. Some statistics about the movement trigger(s), the methods used to measure displacement, the material forming the rupture surface and the type of the vulnerable facilities are presented. It is shown that the expected degree of damage to urban settlements, highways, bridges and dams can be related to the slide velocity or accumulating displacement. Buildings and residential houses may tolerate higher slide velocities and total displacements than other facilities before experiencing serious damage. Movements as low as 100 mm may severely damage bridges, but such low rates may cause only moderate damage to urban communities. The relationship between movement and the expected extent of damage should be useful to geotechnical engineers who deal with different classes of slow slides and will help in the choice of appropriate mitigation measures based on preliminary estimates of movement rates.     

Application of the water balance model J2000 to estimate groundwater recharge in a semi-arid environment: a case study in the Zarqa River catchment, NW-Jordan

Pollution and overexploitation of scarce groundwater resources is a serious problem in the Zarqa River catchment, Jordan. To estimate this resource’s potential, the amount and spatial distribution of groundwater recharge was calculated by applying the hydrological model J2000. The simulation period is composed of daily values gathered over a 30-year period (July 1977 to June 2007). The figure finally obtained for estimated groundwater recharge of the Zarqa River catchment is 105 × 10⁶ m³ per year (21 mm a^?1). This is 19 % higher than the value previously assumed to be correct by most Jordanian authorities. The average ratio of precipitation to groundwater recharge is 9.5 %. To directly validate modelled groundwater recharge, two independent methods were applied in spring catchments: (1) alteration of stable isotope signatures (δ¹⁸O, δ²H) between precipitation and groundwater and (2) the chloride mass balance method. Recharge rates determined by isotopic investigations are 25 % higher, and recharge rates determined by chloride mass balance are 9 % higher than the modelled results for the corresponding headwater catchments. This suggests a reasonably modelled safe yield estimation of groundwater resources.     

A heat flow and physical properties package for the surface of Mercury

European Space Agencies fifth cornerstone mission BepiColombo includes a ‘Surface Element’ to land a scientific payload on the surface of Mercury. The current strawman payload includes a heat flow and physical properties package (HP³), focussing on key thermal and mechanical properties of the near-surface material (down to a depth of 2–5 m) and the measurement of heat flow from Mercury's interior, an important constraining parameter for models of the planet's interior and evolution. We present here an overview of the HP³ experiment package and its possible accommodation in a self-inserting ‘mole’ device. A mole is considered to be the most appropriate deployment method for HP³, at least in the currently-assumed case of an airbag-assisted soft landing architecture for the Mercury Surface Element.     

Fractures,hydrothermal alterations and permeability in the Soultz Enhanced Geothermal System

Borehole studies of the Soultz-sous-Forêts granite are dedicated to deep geothermics. The hydraulic properties of the reservoir are mainly controlled by the occurrence of some altered cataclastic shear zones showing a low natural permeability characterized by the occurrence of brines. Those zones show a fracture cluster organisation with sealed fractures of various types (post-filled joints, sheared fractures, veins). The main hydrothermal deposits observed within the permeable zones are geodic quartz, carbonates, illite and more locally sulphides. The fracture wall–rocks are intensely transformed: dissolution of igneous minerals, crystallization of new minerals, porosity and permeability increase. It is important to characterize the newly-formed minerals in order to choose the reagents used to improve the permeability of the exchanger by chemical stimulations. This article represents a synthesis of the studies completed by the authors between 1990 and 2008 on the fracture networks, hydrothermal alterations and mineral crystallizations they induced and data about the flow pathways in the exchanger.