Role of Subsurface Brines in Salt Balance: The Case Study of the Caspian Sea and Kara Bogaz Bay

The water level of the Caspian Sea fluctuated significantly during recent history, without consensus for the cause. The varied chemistry of the Caspian, Kara Bogaz and sediment a interstitial waters provides a further insight. Element concentrations and ⁸⁷Sr/⁸⁶Sr ratios of the interstitial waters were compared to those of Caspian and Kara Bogaz open waters, and of acid-leached extractable components. The ⁸⁷Sr/⁸⁶Sr ratios of the interstitial waters are explained by addition of subterranean waters similar to nearby spring waters. These subterranean waters yield chemical characteristics such as a Cl/SO₄, ⁸⁷Sr/⁸⁶Sr, Ca/Sr and K/Rb ratios of respectively 80, 0.7086, 250 and 1,800. However, their addition does not explain the large difference in the K/Rb ratio of the Caspian and Kara Bogaz waters, respectively at 7,630 and 17,550, which implies also a leaching of salt deposits by the upward migrating subterranean waters. The sediments of the southern Caspian basin, with low Na, Cl and SO₄ in their interstitial waters, deposited apparently in an anoxic environment. The related chemical changes in the waters are also indicative of a recent change in the hydrologic regime, possibly induced by a changing morphology of the drainage basin.     

An Investigation into Ridge-Top Turbulence Characteristics During Neutral and Weakly Stable Conditions: Velocity Spectra and Isotropy

An investigation into high Reynolds number turbulent flow over a ridge top in New Zealand is described based on high-resolution in-situ measurements, using ultrasonic anemometers for two separate locations on the same ridge with differing upwind terrain complexity. Twelve 5-h periods during neutrally stratified and weakly stable atmospheric conditions with strong wind speeds were sampled at 20 Hz. Large (and small) turbulent length scales were recorded for both vertical and longitudinal velocity components in the range of 7–23 m (0.7–3.3 m) for the vertical direction and 628–1111 m (10.5–14.5 m) for the longitudinal direction. Large-scale eddy sizes scaled to the WRF (Weather Research and Forecasting) numerical model simulated boundary-layer thickness for both sites, while small-scale turbulent features were a function of the complexity of the upwind terrain. Evidence of a multi-scale turbulent structure was obtained at the more complex terrain site, while an assessment of the three-dimensional isotropy assumption in the inertial subrange of the spectrum showed anisotropic turbulence at the less complex site and evidence of isotropic turbulence at the more complex site, with a spectral ratio convergence deviating from the 4/3 or unity values suggested by previous theory and practice. Existing neutral spectral models can represent locations along the ridge top with simple upwind complexity, especially for the vertical wind spectra, but sites with more orographic complexity and strong vertical wind speeds are often poorly represented using these models. Measured spectra for the two sites exhibited no significant diurnal variation and very similar large-scale and small-scale turbulent length scales for each site, but the turbulence energy measured by the variances revealed a strong diurnal difference.     

Direct terrestrial-marine correlation demonstrates surprisingly late onset of the last interglacial in central Europe

An interdisciplinary study of a small sedimentary basin at Neumark Nord 2 (NN2), Germany, has yielded a high-resolution record of the palaeomagnetic Blake Event, which we are able to place at the early part of the last interglacial pollen sequence documented from the same section. We use this data to calculate the duration of this stratigraphically important event at 3400 ± 350 yr. More importantly, the Neumark Nord 2 data enables precise terrestrial-marine correlation for the Eemian stage in central Europe. This shows a remarkably large time lag of ca. 5000 yr between the MIS 5e ‘peak’ in the marine record and the start of the last interglacial in this region.     

Trophic interactions of the pelagic ciliate Stentor spp. in North Patagonian lakes

The zooplankton of oligotrophic lakes in North Patagonia is often dominated by mixotrophic ciliates, particularly Stentor amethystinus and Stentor araucanus. Therefore, we tested whether Stentor spp. (i) is an important food for juvenile endemic (Cheirodon australe, Galaxias maculatus, Odontesthes mauleanum, Percichthys trucha) and introduced (Oncorhynchus mykiss) fish species, and (ii) represents a remarkable grazer of bacteria. Ingestion rates of fish estimated by disappearance of Stentor in feeding experiments ranged between 8 (G. maculatus) and 53 (C. australe) ciliates per fish and day, and assimilation rates measured by using radioactively labelled Stentor ranged between 3 (P. trucha) and 52 (C. australe) ciliates per fish and day. However, although we detected the consumption of Stentor by fish, the daily consumption amounted to at most 0.2% of the fish biomass which can not cover the energy requirement of the fish. Furthermore, the daily consumption was equivalent to a maximum of 1.6% of the Stentor standing stock so that fish predation does not seem to be an important mortality factor for the ciliates. The clearance rate of Stentor sp. on natural bacteria was on average 3.8 μl cil⁻¹ h⁻¹. The daily ingestion (mean 3.9 ng C cil⁻¹ d⁻¹) was about 3.5% of the individual biomass of Stentor sp. Therefore, bacteria ingestion might explain a ciliate growth rate of appr. 1% d⁻¹, which was about 17% of the photosynthesis of endosymbiotic algae. The maximum density of Stentor sp. in the lake could ingest about 1 μg C L⁻¹ d⁻¹ bacteria which is only 3% of average bacterial production. Thus, grazing by Stentor sp. does not seem to be a main loss factor for the bacteria.     

Estuaries of the northeastern United States: Habitat and land use signatures

Geographic signatures are physical, chemical, biotic, and human-induced characteristics or processes that help define similar or unique features of estuaries along latitudinal or geographic gradients. Geomorphologically, estuaries of the northeastern U.S., from the Hudson River estuary and northward along the Gulf of Maine shoreline, are highly diverse because of a complex bedrock geology and glacial history. Back-barrier estuaries and lagoons occur within the northeast region, but the domiant type is the drowned-river valley, often with rocky shores. Tidal range and mean depth of northeast estuaries are generally greater when compared to estuaries of the more southern U.S. Atlantic coast and Gulf of Mexico. Because of small estuarine drainage basins, low riverine flows, a bedrock substrate, and dense forest cover, sediment loads in northeast estuaries are generally quite low and water clarity is high. Tidal marshes, seagrass meadows, intertidal mudflats, and rocky shores represent major habitat types that fringe northeast estuaries, supporting commercially-important fauna, forage nekton and benthos, and coastal bird communities, while also serving as links between deeper estuarine waters and habitats through detritus-based pathways. Regarding land use and water quality trends, portions of the northeast have a history of over a century of intense urbanization as reflected in increased total nitrogen and total phosphorus loadings to estuaries, with wastewater treatment facilities and atmospheric deposition being major sources. Agricultural inputs are relatively minor throughout the northeast, with relative importance increasing for coastal plain estuaries. Identifying geographic signatures provides an objective means for comparing the structure, function, and processes of estuaries along latitudinal gradients.     

Magnetostratigraphic results from the eastern Arctic Ocean: AMS 14C ages and relative palaeointensity data of the Mono Lake and Laschamp geomagnetic reversal excursions

A new high-resolution magnetostratigraphic record from the eastern Arctic Ocean has yielded further evidence for the existence of the Laschamp excursion (37–35  ka), the Mono Lake excursion (27–25.5  ka) and possibly another very short excursion (22  ka) inferred from steep negative inclinations. Ages are based on nine AMS (accelerator mass spectrometry) ¹⁴C dates, oxygen isotope stratigraphy and correlation with ODP site 983. Estimates of relative palaeointensity variations for the time interval from 80 to 10  ka have revealed that the documented geomagnetic excursions are linked to large fluctuations of the relative palaeointensity. The lowest values were obtained for the two excursions and the normal–reversed (N–R) and reversed–normal (R–N) transitions of the Laschamp polarity excursion, which itself is characterized by a slight increase of relative palaeointensity during its reversed state. The results are in general agreement with palaeointensity studies from other regions, indicating that these fluctuations could be global phenomena and that the geomagnetic field of the Brunhes Chron was very variable in amplitude as well as in geometry. The new result is one of the rare records comprising large directional as well as large relative palaeointensity variations.     

Thermal conductivity measurements of road construction materials in frozen and unfrozen state

A series of thermal conductivity measurements for various materials was performed in a large climate chamber. The size of the chamber allowed the preparation of relatively large samples in a controlled thermal environment. Three types of thermal sensors were used: (1) two needle probes; (2) a grid of temperature sensors, evenly distributed inside the sample; (3) two additional thermal probes, which were simplified versions of an instrument originally developed for measuring thermal properties of the ice/dust mixture expected to exist at the surface of a comet nucleus. They consist of a series of individual temperature sensors integrated into a glass fibre rod. Each of these sensors can be operated in an active (heated) or passive (only temperature sensing) mode. The following sample materials were used: fine-grained reddish sand, coarse-grained moist sand, gravels with various grain size distributions from < 1 cm up to about 6 cm, and for comparison and calibration pure water (with convection suppressed by adding agar-agar), compact ice, and compact granite. Of particular interest are the measurements with composite samples, like stones embedded in an agar-agar matrix. We describe the evaluation methods and present the results of the thermal conductivity measurements.     

Authigenic sericite record of a fossil geothermal system: the Offenburg trough,central Black Forest,Germany

A fossil geothermal area is hosted by the Carboniferous, Permian and Bunter sandstones of the Offenburg intramontane trough in the central Black Forest. The hydrothermal alteration is identified on the basis of newly formed sericites, which appear as pseudomorphs after feldspar and filling of pore spaces. According to K–Ar dating of sericite, serititization occurred about 145 Ma ago (Jurassic). On the basis of ¹⁸O analyses of sericite, sericite composition and vitrinite reflectance, the hydrothermal fluids had temperatures of 150–210 °C. Because their electrolyte content was low, these fluids are assumed to have derived from meteoric water. A second pulse of electrolyte-rich hydrothermal fluids resulted in quartz overgrowths. Fluid mobilization seems to be linked to the disintegration of Pangaea and to reactivated fault systems extending from the crystalline basement into the intramontane sediments.     

Adaptation of Pressure Based CFD Solvers for Mesoscale Atmospheric Problems

General purpose Computational Fluid Dynamics (CFD) solvers are frequently used in small-scale urban pollution dispersion simulations without a large extent of ver- tical flow. Vertical flow, however, plays an important role in the formation of local breezes, such as urban heat island induced breezes that have great significance in the ventilation of large cities. The effects of atmospheric stratification, anelasticity and Coriolis force must be taken into account in such simulations. We introduce a general method for adapting pressure based CFD solvers to atmospheric flow simulations in order to take advantage of their high flexibility in geometrical modelling and meshing. Compressibility and thermal stratification effects are taken into account by utilizing a novel system of transformations of the field variables and by adding consequential source terms to the model equations of incompressible flow. Phenomena involving mesoscale to microscale coupled effects can be analyzed without model nesting, applying only local grid refinement of an arbitrary level. Elements of the method are validated against an analytical solution, results of a reference calculation, and a laboratory scale urban heat island circulation experiment. The new approach can be applied with benefits to several areas of application. Inclusion of the moisture transport phenomena and the surface energy balance are important further steps towards the practical application of the method.     

The Impact of Land-Surface Parameter Properties and Resolution on the Simulated Cloud-Topped Atmospheric Boundary Layer

A method to simulate characteristics of wind speed in the boundary layer of tropical cyclones in an idealized manner is developed and evaluated. The method can be used in a single-column modelling set-up with a planetary boundary-layer parametrization, or within large-eddy simulations (LES). The key step is to include terms in the horizontal velocity equations representing advection and centrifugal acceleration in tropical cyclones that occurs on scales larger than the domain size. Compared to other recently developed methods, which require two input parameters (a reference wind speed, and radius from the centre of a tropical cyclone) this new method also requires a third input parameter: the radial gradient of reference wind speed. With the new method, simulated wind profiles are similar to composite profiles from dropsonde observations; in contrast, a classic Ekman-type method tends to overpredict inflow-layer depth and magnitude, and two recently developed methods for tropical cyclone environments tend to overpredict near-surface wind speed. When used in LES, the new technique produces vertical profiles of total turbulent stress and estimated eddy viscosity that are similar to values determined from low-level aircraft flights in tropical cyclones. Temporal spectra from LES produce an inertial subrange for frequencies \(\gtrsim \)0.1 Hz, but only when the horizontal grid spacing \(\lesssim \)20 m.