The Water Framework Directive: Can more information be extracted from groundwater data? A case study of Seewinkel,Burgenland, eastern Austria

Water protection is one of the most important goals in environmental protection. The Clean Water Act in the USA and the Water Framework Directive (WFD) in Europe are the legal frameworks to facilitate the achievement of this goal. The question is raised of whether more information can be extracted from WFD-related groundwater data. To answer it, a methodology has been developed that is easy to use and could be implemented into official practice. A case study is presented in which the groundwater data of a sodic area in Austria (Seewinkel) is assessed. Eighteen parameters in groundwater sampled from 23 wells (1991–2011) were analyzed. With basic statistics, trend-, cluster-, Wilks’ λ and spatial sampling density analysis, local phosphorus and boron phenomena were described, along with the determining role of sulphate, groundwater flow, and the oxygen gradient in the area. As a final step, the spatial sampling density was determined. Regarding the current set of parameters, all the sampling sites are necessary and only in the case of certain parameters (Ca²⁺, Mg²⁺, K⁺, NO₃ ^?, pH) could one sampling site be abandoned. The methodology applied brings a new perspective to exploring groundwater data collected according to the requirements of the WFD.     

The influence of channel morphology on bedload path lengths: Insights from a survival process model

Tracer studies are a commonly used tool to develop and test Einstein-type stochastic bedload transport models. The movements of these tracers are controlled by many factors including grain characteristics, hydrologic forcing, and channel morphology. Although the influence of these sediment storage zones related to morphological features (e.g., bars, pools, riffles) have long been observed to “trap” bedload particles in transport, this influence has not been adequately quantified. In this paper we explore the influence of channel morphology on particle travel distances through the development of a Bayesian survival process model. This model simulates particle path length distributions using a location-specific “trapping probability” parameter (p_i ), which is estimated using the starting and ending locations of bedload tracers. We test this model using a field tracer study from Halfmoon Creek, Colorado. We find that (1) the model is able to adequately recreate the observed multi-modal path length distributions, (2) particles tend to accumulate in trapping zones, especially during large floods, and (3) particles entrained near a trapping zone will travel a shorter distance than one that is further away. Particle starting positions can affect path lengths by as much as a factor of two, which we confirm by modelling “starting-location-specific” path length probability distributions. This study highlights the importance of considering both tracer locations and channel topography in examinations of field tracer studies. © 2020 John Wiley & Sons, Ltd.     

TL age-estimates for the Middle Palaeolithic layers at Theopetra cave (Greece)

The lowest stratigraphic unit of Theopetra cave (Greece) contains a Middle Palaeolithic sequence radiocarbon dated to between 46 and 35 ka BP; at the limit of this dating method. The upper part of this sequence has yielded late Middle Palaeolithic lithic assemblages containing several early Upper Palaeolithic artifacts. To get more precise dates for the human occupation of the cave, burnt flint specimens from these Middle Palaeolithic layers were dated by thermoluminescence. The dates obtained are coherent and indicate that the first human occupation of the cave took place at the end of isotopic stage 6 or more probably at the beginning of stage 5, much earlier than previously proposed. In the light of this new evidence, it is reasonable to assume that: (a) Theopetra contains the oldest dated Middle Palaeolithic deposits of Greece and (b) that the assemblages first interpreted as “Transitional Middle/Upper Palaeolithic” industries may be the result of post-depositional mixing of cultural material.     

Authigenic sericite record of a fossil geothermal system: the Offenburg trough,central Black Forest,Germany

A fossil geothermal area is hosted by the Carboniferous, Permian and Bunter sandstones of the Offenburg intramontane trough in the central Black Forest. The hydrothermal alteration is identified on the basis of newly formed sericites, which appear as pseudomorphs after feldspar and filling of pore spaces. According to K–Ar dating of sericite, serititization occurred about 145 Ma ago (Jurassic). On the basis of ¹⁸O analyses of sericite, sericite composition and vitrinite reflectance, the hydrothermal fluids had temperatures of 150–210 °C. Because their electrolyte content was low, these fluids are assumed to have derived from meteoric water. A second pulse of electrolyte-rich hydrothermal fluids resulted in quartz overgrowths. Fluid mobilization seems to be linked to the disintegration of Pangaea and to reactivated fault systems extending from the crystalline basement into the intramontane sediments.     

Laboratory Investigation of the Influence of Geotextile on the Stress–Strain and Volumetric Change Behavior of Sand

This paper presents the results of triaxial tests conducted for the investigation of the influence of geotextile on both the stress–strain and volumetric change behavior of reinforced sands. Tests were carried out on loose sand. The experimental program includes drained compression tests on samples reinforced with different values of both geotextile layers (1 ≤ Ng ≤ 3) and confining pressure (\(\upsigma_{\text{c}}^{\prime }\)) varying from 50 to 200 kPa. Tests show that the contribution of geotextile is negligible until an axial strain threshold that range between 2.5% for a confining pressure of 50 kPa to lower than 1% for 100 and 200 kPa confining pressure. At higher values of ε_a, geotextile induces a quasi-linear increase in the stress deviator (q) and volume contraction in the reinforced sand. Tests show a negligible influence of the number of geotextile layers (Ng) on the contribution of geotextile to both stress–strain and volumetric change, when normalized with Ng. Tests also show that the contribution of geotextile to the stress–strain mobilization augments with the increase in the confining pressure, while its contribution to the volume contraction decreases with the increase in the confining pressure. The reinforced soil becomes contracting in the case of 2 and 3 geotextile layers.     

Anthropogenic influence of trace metals in sediments of the Al-Qilt catchment,West Bank,Palestine: 1. Contamination factor and bonding forms

Al-Qilt catchment, located east of both the Ramallah and Jerusalem districts is strongly influenced by waste waters discharged from Israeli settlements and Palestinian urban centers. In this research, our aim was to verify the chemical status of the surface sediments from the Al-Qilt catchment during 2008/2009. For this purpose, 36 surface sediment samples were collected and analyzed with ICP/MS within the fraction of below 63 μm. The extent of contamination of trace metals from Al-Qilt sediments sites were measured by evaluating the contamination factors (CF) from digestion by aqua regia and additionally by sequential extraction steps using the BCR-method. On the basis of the calculated CF, sediments appear particularly contaminated with Zn, Cu, Ag, Sn, Cd, Hg, Bi, and B. Three regions, Wadi Sweanit, Ras Al-Qilt, and Qalandiah have been identified as critical points of contamination. Trace metal inputs to the Al-Qilt catchment need to be kept under strict control in the future since Ras Al-Qilt is considered as one of the important springs in the area and is used for domestic purposes. Moreover, it will be susceptible to pollution if no action is taken to decrease the pollution at the upstream of Al-Qilt.     

Reach‐scale contributions of road‐surface sediment to the Honna River,Haida Gwaii,BC

Gravel road surfaces can be a major source of fine sediment to streams, yet their contribution to channel reach sediment balances remains poorly documented. To quantify the input of road surface material and to compare this input with natural sediment sources at the reach scale, suspended sediment dynamics was examined and a 16‐month sediment balance was developed for a ~35 channel‐width (approx. 425 m) reach of the Honna River, a medium‐size, road‐affected stream located in coastal British Columbia. Of the 105 ± 33 t of suspended material passing through the reach, 18 ± 6% was attributed to the road surface. The high availability of sediment on the road surface appears to limit hysteresis in road run‐off. During rainstorms that increase streamflow, road surface material composed 0.5–15% of sediment inputs during relatively dry conditions from April to the end of September and 5–70% through wetter conditions from October to the end of March, but our data do not show evidence of major sediment accumulation on the riverbed in the reach. A comparison of modelled sediment production on the road surface with observed yields from drainage channels suggests that (1) during low intensity rainfall, ditches and drainage channels may trap sediment from road run‐off, which is subsequently released during events of greater intensity, and/or (2) production models do not effectively describe processes, such as deposition or erosion of sediment in ditches, which control sediment transport and delivery. Our findings further emphasize the risk of unpaved roads in polluting river systems and highlight the continued need for careful road design and location away from sensitive aquatic environments. Copyright © 2016 John Wiley & Sons, Ltd.     

An Investigation into Ridge-Top Turbulence Characteristics During Neutral and Weakly Stable Conditions: Velocity Spectra and Isotropy

An investigation into high Reynolds number turbulent flow over a ridge top in New Zealand is described based on high-resolution in-situ measurements, using ultrasonic anemometers for two separate locations on the same ridge with differing upwind terrain complexity. Twelve 5-h periods during neutrally stratified and weakly stable atmospheric conditions with strong wind speeds were sampled at 20 Hz. Large (and small) turbulent length scales were recorded for both vertical and longitudinal velocity components in the range of 7–23 m (0.7–3.3 m) for the vertical direction and 628–1111 m (10.5–14.5 m) for the longitudinal direction. Large-scale eddy sizes scaled to the WRF (Weather Research and Forecasting) numerical model simulated boundary-layer thickness for both sites, while small-scale turbulent features were a function of the complexity of the upwind terrain. Evidence of a multi-scale turbulent structure was obtained at the more complex terrain site, while an assessment of the three-dimensional isotropy assumption in the inertial subrange of the spectrum showed anisotropic turbulence at the less complex site and evidence of isotropic turbulence at the more complex site, with a spectral ratio convergence deviating from the 4/3 or unity values suggested by previous theory and practice. Existing neutral spectral models can represent locations along the ridge top with simple upwind complexity, especially for the vertical wind spectra, but sites with more orographic complexity and strong vertical wind speeds are often poorly represented using these models. Measured spectra for the two sites exhibited no significant diurnal variation and very similar large-scale and small-scale turbulent length scales for each site, but the turbulence energy measured by the variances revealed a strong diurnal difference.     

Estuaries of the northeastern United States: Habitat and land use signatures

Geographic signatures are physical, chemical, biotic, and human-induced characteristics or processes that help define similar or unique features of estuaries along latitudinal or geographic gradients. Geomorphologically, estuaries of the northeastern U.S., from the Hudson River estuary and northward along the Gulf of Maine shoreline, are highly diverse because of a complex bedrock geology and glacial history. Back-barrier estuaries and lagoons occur within the northeast region, but the domiant type is the drowned-river valley, often with rocky shores. Tidal range and mean depth of northeast estuaries are generally greater when compared to estuaries of the more southern U.S. Atlantic coast and Gulf of Mexico. Because of small estuarine drainage basins, low riverine flows, a bedrock substrate, and dense forest cover, sediment loads in northeast estuaries are generally quite low and water clarity is high. Tidal marshes, seagrass meadows, intertidal mudflats, and rocky shores represent major habitat types that fringe northeast estuaries, supporting commercially-important fauna, forage nekton and benthos, and coastal bird communities, while also serving as links between deeper estuarine waters and habitats through detritus-based pathways. Regarding land use and water quality trends, portions of the northeast have a history of over a century of intense urbanization as reflected in increased total nitrogen and total phosphorus loadings to estuaries, with wastewater treatment facilities and atmospheric deposition being major sources. Agricultural inputs are relatively minor throughout the northeast, with relative importance increasing for coastal plain estuaries. Identifying geographic signatures provides an objective means for comparing the structure, function, and processes of estuaries along latitudinal gradients.