江西相山铀矿田沙洲矿床流体包裹体研究

对江西相山铀矿田沙洲矿床方解石、石英和萤石流体包裹体的研究发现, 流体包裹体均一温度主要在200~210℃和230~260℃两个区间内, 盐度w(NaCl)分别为11.00%~12.00%和18.00%~20.00%, 平均密度为0.94g/cm3, 成矿压力为168.4×105~433.0×105Pa, 平均值为283.8×105Pa。由压力与深度的关系估算成矿深度值为0.561~1.443km, 平均值为0.946km; 结合流体包裹体成分和稳定同位素等分析, 得出成矿流体主要来自大气水, 并且有岩浆水以及地幔热液的参与。     

贵州1∶5万耕地质量地球化学调查评价方法技术

为摸清耕地质量"家底",服务现代山地特色高效农业发展,贵州在全国率先完成全省1∶5万耕地质量地球化学调查评价工程。其方法技术总体遵循现行技术标准的基本原则和要求外,结合贵州山地耕地实际,对耕地表层土壤样点布设、耕地土壤养分等级评价、耕地土壤环境质量评价,以及耕地土壤质量综合等级评价等,进行了探索与创新,从而进一步完善了调查评价有关方法技术,对贵州特殊地质背景和自然地理环境条件下的耕地质量地球化学调查评价工程的圆满完成,起到了较好的作用。本文将重点介绍上述内容,并对有关问题进行讨论,以丰富和完善这一领域的方法技术。     

北山造山带大地构造相及构造演化

根据1:25万马鬃山幅区调填图资料,从造山带不同构造单元的火山-沉积建造、岩浆岩序列演化、变质变形特征及时空配位关系研究入手,应用大地构造相划分理论,根据北山多旋回复合造山带的特点,识别出15种大地构造相,并探讨了北山古生代构造格局与构造演化模式.     

用PC－1500机向数据库传送数据的实践

叙述了在建立数据库时，如何简便有效地将ＰＣ－１５００袖珍机作为辅助录入工具的具体办法。在微机不足时，该法简单、经济，值得推广。     

GPS导航的技术改进

在完善ＧＰＳ导航方式的过程中，引入重要目标点的概念，并以此为思想指导，修改原导航程序，使之多个目标点明确、直观地显示于驾驶台及船上各实验室的计算机显示屏幕上。从而提高船舶停靠站位的精度，并使船舶停靠原站位具可重复性。这样，满足了海上地质勘测和石油化探中多点间歇采样的需要，同时，亦提高了工作效率并有利于船舶航行安全。     

利用ArcGIS构建地形图分幅空间数据库

本文利用ArcGIS绑定的脚本语言Python和AML及其空间分析功能,设计了简单可行的算法,并编制了相应的程序,构建了国家基本比例尺地形图分幅空间数据库。首先生成图幅分幅格网,以及对应的网格标识点、图幅编号文件,将标识点与图幅编号文件关联后再与图幅网格叠加即可。该方法充分利用了GIS的空间叠加功能,仅用了极少量的程序代码,没有编程经验的人员可以比较容易掌握,对于各行业应用领域的工作者有很大帮助。     

Stability of goaf-side entry driving in 800-m-deep island longwall coal face in underground coal mine

Goaf-side entry driving in underground coal mines could greatly improve coal recovery rates. However, it becomes more difficult to maintain stability, especially in deep coal mines. Pillar width plays a pivotal role in the stability of goaf-side entry driving. To obtain a reasonable and appropriate narrow pillar width, theoretical calculations of the widths of mining-damaged zone and limit equilibrium zone in the pillar are derived according to limit equilibrium theory. Based on the stability issues of goaf-side entry driving in the first island longwall coal face (LCF) at a depth of 800 m below the surface in Guqiao Coal Mine in China, a numerical model is established by FLAC software to analyze the stability of the surrounding rock of goaf-side entry driving during excavation, using various coal pillar widths and support schemes. The results obtained from theoretical calculations, numerical simulation, and engineering practice indicate that an 8-m-wide coal pillar is relatively reasonable, appropriate, and feasible. Field measurements show that deformations of the surrounding rock could be efficiently controlled 31 days after the support schemes were implemented in goaf-side entry driving with an 8-m-wide narrow pillar along the adjacent goaf side with a compaction duration of 10 months. The mining influence range of the overlying LCF on the stability of goaf-side entry driving is found to be the area from 50 m ahead of the LCF to 70 m behind the LCF as it passes over the measurement point.     

Borehole stress monitoring analysis on advanced abutment pressure induced by Longwall Mining

The paper presented the research on the dynamic advanced abutment stress induced by longwall mining with borehole stress meters on mining side coal mass. Twenty vibrating wire borehole stress meters were installed into the extracting coal mass wall of a first mining roadway of 910 m depth in Zhuji Coal Mine, China, and were used to monitor dynamic changes in vertical and horizontal stresses. Three months of continuous monitoring and further analysis showed that the impacting distance of advanced abutment stress induced by mining in the strike of the working face along its central axis was the farthest, greater than 250 m (the face length is 220 m); it gradually decreased in the radial direction of the face from its central axis outward; the pressure peak was located within 24 m in the front of the mining coal wall; non-synchronous caving of the layered mudstone roof at the stope occurred. Comparison between vertical and horizontal stress increments indicated that the horizontal stress was much smaller than the vertical stress in the coal mass of mining side, while the latter’s magnitude determined the drastic degree of mine pressure manifestation. The study has been applied to determine the advanced support length of the working face and further provide a reliable basis to forecast such dynamic disasters as rock burst, coal and gas outburst, etc., as well as to design the asymmetric supports on both sides of a gateway.     

中亚巴尔喀什成矿带萨亚克大型铜矿田矿床地质特征与成矿模式

综述了哈萨克斯坦巴尔喀什成矿带萨亚克大型铜矿田地质特征、矿田构造与成矿模式。萨亚克铜矿田是中亚成矿域巴尔喀什成矿带唯一的以矽卡岩型铜矿化为主的大型铜矿床,产在萨亚克地堑复向斜内。该矿田包括几个在空间上相对独立的矽卡岩型铜矿床、斑岩型铜钼网状脉矿床和一系列石英脉型矿脉,构成了斑岩型和矽卡岩型两个端元形成的成矿系列,但以矽卡岩型为主。矿床主要位于中石炭世灰岩与晚石炭世花岗岩类的接触带上,具有独特的矽卡岩型Cu-Au-Mo矿化组合,成矿时代为海西中晚期,根据本研究进行的锆石SHR I MP定年结果,主要与次要成矿期年龄分别为335±2Ma和308±10Ma。金属矿床主要赋存在地堑复向斜内局部发育的鞍状背斜顶部,部分富矿体的产出严格受断裂构造-岩浆活动的控制。闪长岩与铜矿化作用的关系最为密切,铜含量可高达1%以上;其次,花岗闪长岩与铜矿化的关系也较为密切,铜含量可达0.2%以上。萨亚克矽卡岩型铜矿田铜保有储量约为57.5万吨。     

Re–Os geochronology of Cu and W–Mo deposits in the Balkhash metallogenic belt, Kazakhstan and its geological significance

The Central Asian metallogenic domain (CAMD) is a multi-core metallogenic system controlled by boundary strike-slip fault systems. The Balkhash metallogenic belt in Kazakhstan, in which occur many large and super-large porphyritic Cu–Mo deposits and some quartz vein- and greisen-type W–Mo deposits, is a well-known porphyritic Cu–Mo metallogenic belt in the CAMD. In this paper 11 molybdenite samples from the western segment of the Balkhash metallogenic belt are selected for Re–Os compositional analyses and Re–Os isotopic dating. Molybdenites from the Borly porphyry Cu deposit and the three quartz vein-greisen W–Mo deposits—East Kounrad, Akshatau and Zhanet—all have relatively high Re contents (2712–2772 μg/g for Borly and 2.267–31.50 μg/g for the other three W–Mo deposits), and lower common Os contents (0.670–2.696 ng/g for Borly and 0.0051–0.056 ng/g for the other three). The molybdenites from the Borly porphyry Cu–Mo deposit and the East Kounrad, Zhanet, and Akshatau quartz vein- and greisen-type W–Mo deposits give average model Re–Os ages of 315.9 Ma, 298.0 Ma, 295.0 Ma, and 289.3 Ma respectively. Meanwhile, molybdenites from the East Kounrad, Zhanet, and Akshatau W–Mo deposits give a Re–Os isochron age of 297.9 Ma, with an MSWD value of 0.97. Re–Os dating of the molybdenites indicates that Cu–W–Mo metallogenesis in the western Balkhash metallogenic belt occurred during Late Carboniferous to Early Permian (315.9–289.3 Ma), while the porphyry Cu–Mo deposits formed at 316 Ma, and the quartz vein-greisen W–Mo deposits formed at 298 Ma. The Re–Os model and isochron ages thus suggest that Late Carboniferous porphyry granitoid and pegmatite magmatism took place during the late Hercynian movement. Compared to the Junggar-East Tianshan porphyry Cu metallogenic belt in northwestern China, the formation of the Cu–Mo metallogenesis in the Balkhash metallogenic belt occurred between that of the Tuwu-Yandong in East Tianshan and the Baogutu porphyry Cu deposits in West Junggar. Collectively, the large-scale Late Carboniferous porphyry Cu–Mo metallogenesis in the Central Asian metallogenic domain is related to Hercynian tectono-magmatic activities.