Assessing sound exposure from shipping in coastal waters using a single hydrophone and Automatic Identification System (AIS) data

Underwater noise from shipping is a growing presence throughout the world's oceans, and may be subjecting marine fauna to chronic noise exposure with potentially severe long-term consequences. The coincidence of dense shipping activity and sensitive marine ecosystems in coastal environments is of particular concern, and noise assessment methodologies which describe the high temporal variability of sound exposure in these areas are needed. We present a method of characterising sound exposure from shipping using continuous passive acoustic monitoring combined with Automatic Identification System (AIS) shipping data. The method is applied to data recorded in Falmouth Bay, UK. Absolute and relative levels of intermittent ship noise contributions to the 24-h sound exposure level are determined using an adaptive threshold, and the spatial distribution of potential ship sources is then analysed using AIS data. This technique can be used to prioritize shipping noise mitigation strategies in coastal marine environments.     

Measuring gravel transport and dispersion in a mountain river using passive radio tracers

Random walk models of fluvial sediment transport recognize that grains move intermittently, with short duration steps separated by rests that are comparatively long. These models are built upon the probability distributions of the step length and the resting time. Motivated by these models, tracer experiments have attempted to measure directly the steps and rests of sediment grains in natural streams. This paper describes results from a large tracer experiment designed to test stochastic transport models. We used passive integrated transponder (PIT) tags to label 893 coarse gravel clasts and placed them in Halfmoon Creek, a small alpine stream near Leadville, Colorado, USA. The PIT tags allow us to locate and identify tracers without picking them up or digging them out of the streambed. They also enable us to find a very high percentage of our rocks, 98% after three years and 96% after the fourth year. We use the annual tracer displacement to test two stochastic transport models, the Einstein–Hubbell–Sayre (EHS) model and the Yang–Sayre gamma‐exponential model (GEM). We find that the GEM is a better fit to the observations, particularly for slower moving tracers and suggest that the strength of the GEM is that the gamma distribution of step lengths approximates a compound Poisson distribution. Published in 2012. This article is a US Government work and is in the public domain in the USA.     

Ventifacts on Earth and Mars: Analytical, field, and laboratory studies supporting sand abrasion and windward feature development

Terrestrial ventifacts – rocks that have been abraded by windblown particles – are found in desert, periglacial, and coastal environments. On Mars, their abundance suggests that aeolian abrasion is one of the most significant erosional processes on the planet. There are several conflicting viewpoints concerning the efficacy of potential abrasive agents, principally sand and dust, and the relationships between wind direction and ventifact form. Our research, supported by a review of the literature, shows that sand, rather than dust or other materials, is the principle abrasive agent on Earth and Mars. Relative to dust, sand delivers about 1000× the energy onto rock surfaces on a per particle basis. Even multiple dust collisions will do little or no damage because the stress field from the impact is much smaller than the spacing of microflaws in the rock. The abrasion profiles of terrestrial ventifacts are consistent with a kinetic energy flux due to saltating sand, not airborne dust. Furthermore, Scanning Electron Microscope images reveal surfaces that are fractured and cleaved by sand grain impact. With respect to their distribution, ventifacts are found in regions that contain sand or did so in the past, but are not found where only dust activity occurs. Contrary to some published reports, our evidence from field studies, analytical models, and wind tunnel and other experiments indicates that windward, not leeward, abrasion is responsible for facet development and feature formation (pits, flutes, and grooves). Leeward abrasion is confined to fluvial conditions, in which the high viscosity and density of water are able to entrain sand-size material in vortices. Therefore, ventifacts and abraded terrain provide an unambiguous proxy for the direction of the highest velocity winds, and can be used to reconstruct palaeowind flow.     

Controls on valley spacing in landscapes subject to rapid base‐level fall

What controls the architecture of drainage networks is a fundamental question in geomorphology. Recent work has elucidated the mechanisms of drainage network development in steadily uplifting landscapes, but the controls on drainage‐network morphology in transient landscapes are relatively unknown. In this paper we exploit natural experiments in drainage network development in incised Plio‐Quaternary alluvial fan surfaces in order to understand and quantify drainage network development in highly transient landscapes, i.e. initially unincised low‐relief surfaces that experience a pulse of rapid base‐level drop followed by relative base‐level stasis. Parallel drainage networks formed on incised alluvial‐fan surfaces tend to have a drainage spacing that is approximately proportional to the magnitude of the base‐level drop. Numerical experiments suggest that this observed relationship between the magnitude of base‐level drop and mean drainage spacing is the result of feedbacks among the depth of valley incision, mass wasting and nonlinear increases in the rate of colluvial sediment transport with slope gradient on steep valley side slopes that lead to increasingly wide valleys in cases of larger base‐level drop. We identify a threshold magnitude of base‐level drop above which side slopes lengthen sufficiently to promote increases in contributing area and fluvial incision rates that lead to branching and encourage drainage networks to transition from systems of first‐order valleys to systems of higher‐order, branching valleys. The headward growth of these branching tributaries prevents the development of adjacent, ephemeral drainages and promotes a higher mean valley spacing relative to cases in which tributaries do not form. Model results offer additional insights into the response of initially unincised landscapes to rapid base‐level drop and provide a preliminary basis for understanding how varying amounts of base‐level change influence valley network morphology. Copyright © 2015 John Wiley & Sons, Ltd.     

Mapping and detection of land use change in a coal mining area using object-based image analysis

Object-based image analysis was used to map land use in the Panxie coal mining area, East China, where long-term underground coal mines have been exploited since the 1980s. A rule-based classification approach was developed for a Pleiades image to identify the desired land use classes, and the same rule-based classification strategies, after the threshold values had been modified slightly, were applied to the Landsat series images. Five land use classes were successfully captured with overall accuracies of between 80 and 94%. The classification approach was validated for its flexibility and robustness. Multitemporal classification results indicated that land use changed considerably in the Panxie coal mining area from 1989 to 2013. The urban, coal and coal gangue, and water areas increased rapidly in line with the growth in mine production. Urban areas increased from 9.38 to 20.92% and showed a tendency to increase around the coal mines. From 1989 to 2013 the coal and coal gangue area increased by 40-fold, from 0.02 to 0.58%. Similarly, the water area increased from 2.77 to 7.84% over this time period, mainly attributable to the spread of waterlogged areas. The waterlogged areas increased to about 2900 ha in 2013, which was about 80 times more than their area in 1989. In contrast, the area of cultivated land was negatively related to the increase in mine production and decreased from 73.11 to 57.25%. The results of this study provide a valuable basis for sustainable land management and environmental planning in the Panxie coal mining area.     

Bank erosion of legacy sediment at the transition from vertical to lateral stream incision

Streambank erosion is a primary source of suspended sediments in many waterways of the US Atlantic Piedmont. This problem is exacerbated where banks are comprised of fine sediment produced by the intensive land use practices of early European settlers. A stream in this region, Richland Creek incises into banks comprised of three stratigraphic layers associated with historic land use: pre‐European settlement, early European agriculture and development, and water‐powered milldam operation. This study aims to identify the bank processes along a reach of Richland Creek that is eroding towards its pre‐disturbance elevation. The volume of material that has eroded along this stream since the milldam breached was calculated by differencing a reconstructed surface of the pond bed and an aerial lidar digital terrain model (DTM). Immediately downstream from the study reach, the channel is floored by bedrock and immediately upstream the rate of channel erosion approximately doubled along the longitudinal profile of Richland Creek, which indicate that the study reach spans the transition from a channel dominated by vertical incision in the upstream direction to horizontal widening in the downstream direction. The combined hydrometeorological conditions and dominant processes causing reach‐scale cut bank erosion were investigated with analyses of stream stage, precipitation, and streambank volumetric and surfaces change that was measured during nine terrestrial lidar surveys in 2010–2012. The spatial variability of erosion during a simulated precipitation event was examined in a field‐based experiment. Erosion was greatest where mill pond sediment columns detached along vertical desiccation and horizontal seepage cracks. This sediment accumulated on the bank toe throughout the study and was a source of readily‐entrained fine sediment contrary to the upper reaches where depositional accommodation space is more limited. Findings suggest that hotspots of sediment excavation progress upstream, indicating that restoration efforts should focus upon stabilizing banks at these locations. Copyright © 2015 John Wiley & Sons, Ltd.     

Burning molten metallic spheres: One class of ball lightning?

Abrahamson and Dinniss [2000. Ball lightning caused by oxidation of nanoparticle networks from normal lightning strikes on soil. Nature 403, 519–521] proposed a theory of ball lighting in which silicon nanoparticles undergo slow oxidation and emit light. Paiva et al. [2007. Production of ball-lightning-like luminous balls by electrical discharges in silicon. Physical Review Letters 98, 048501] reported that an electric arc to silicon produced long-lasting luminous white spheres showing many characteristics of ball lightning. We show experimentally that these consist of burning molten silicon spheres with diameters in the 0.1–1 mm range. The evidence of our experiments leads us to propose that a subset of ball lightning events may consist of macro-scale molten spheres of burning metallic materials likely to be ejected from a conventional lightning strike to earth.     

Climate change triggered sedimentation and progressive tectonic uplift in a coupled piedmont–axial system: Cuyama Valley,California, USA

Channels on the north‐facing piedmont of the Sierra Madre range in Cuyama Valley, California have alternated between three process regimes during the late Quaternary: (1) vertical incision into piedmont alluvium and older sedimentary deposits; (2) lateral erosion; and (3) sediment accumulation. The state of the piedmont system at a given time has been controlled by upstream sediment flux, regional tectonic uplift and incision of the axial Cuyama River. To better understand the timing and to attempt to interpret causes of past geomorphological processes on the Sierra Madre piedmont, we mapped the surficial geology and dated alluvial deposits using radiocarbon, cosmogenic and optical dating methods. Four primary episodes of sedimentation have occurred since ca. 100 ka, culminating in the most recent period of extensive piedmont sedimentation between 30 and 20 ka. Fill terraces in Cuyama Valley formed by piedmont sediment accumulation followed by vertical incision and lateral erosion are fairly planar and often mantle strath bedrock surfaces. Their vertical spatial arrangement is a record of progressive regional tectonic uplift and concomitant axial Cuyama River channel incision migrating up tributary piedmont channels. Subparallel longitudinal terrace profiles which have a linear age–elevation relationship indicate that multiple episodes of climatically controlled sedimentation overprints ～1 m kyr^?1 of regional uplift affecting the Cuyama River and its tributaries. Sedimentation was probably a result of increased precipitation that caused saturation landsliding in steep catchments. It is possible that increased precipitation during the Last Glacial Maximum was caused by both continental‐scale circulation pattern reorganization and increased Pacific storm frequency and intensity caused by ‘early warming’ of nearby Pacific Ocean surface waters. Older episodes of piedmont sedimentation are difficult to correlate with specific climate regimes, but may correlate with previous periods of increased precipitation. Copyright © 2007 John Wiley & Sons, Ltd.     

Evaluating suitability of a tephra dispersal model as part of a risk assessment framework

In volcanic risk assessment it is necessary to determine the appropriate level of sophistication for a given predictive model within the contexts of multiple sources of uncertainty and coupling between models. A component of volcanic risk assessment for the proposed radioactive waste repository at Yucca Mountain (Nevada, USA) involves prediction of dispersal of contaminated tephra during violent Strombolian eruptions and the subsequent transport of that tephra toward a hypothetical individual via surface processes. We test the suitability of a simplified model for volcanic plume transport and fallout tephra deposition (ASHPLUME) coupled to a surface sediment-transport model (FAR) that calculates the redistribution of tephra, and in light of inherent uncertainties in the system. The study focuses on two simplifying assumptions in the ASHPLUME model: 1) constant eruptive column height and 2) constant wind speed and direction during an eruption. Variations in tephra dispersal resulting from unsteady column height and wind conditions produced variations up to a factor of two in the concentration of tephra in sediment transported to the control population. However, the effects of watershed geometry and terrain, which control local remobilization of tephra, overprint sensitivities to eruption parameters. Because the combination of models used here shows limited sensitivity to the actual details of ash fall, a simple fall model suffices to estimate tephra mass delivered to the hypothetical individual.     

Latent and sensible heat flux predictions from a uniform pine forest using surface renewal and flux variance methods

A surface renewal model that links organized eddy motion to the latent and sensible heat fluxes is tested with eddy correlation measurements carried out in a 13m tall uniform Loblolly pine plantation in Duke Forest, Durham, North Carolina. The surface renewal model is based on the occurance of ramp-like patterns in the scalar concentration measurements. To extract such ramp-like patterns from Eulerian scalar concentration measurements, a newly proposed time-frequency filtering scheme is developed and tested. The time-domain filtering is carried out using compactly-supported orthonormal wavelets in conjunction with the Universal Wavelet Thresholding approach of Donoho and Johnstone, while the frequency filtering is carried out by a band-pass sine filter centered around the ramp-occurrence frequency as proposed by other studies. The method was separately tested for heat and water vapour with good agreement between eddy correlation flux measurements and model predictions. The usefulness of the flux-variance method to predict sensible and latent heat fluxes is also considered. Our measurements suggest that the simple flux-variance method reproduces the measured heat and momentum fluxes despite the fact that the variances were measured within the roughness sublayer and not in the surface layer. Central to the predictions of water vapour fluxes using the flux-variance approach is the similarity between heat and water vapour transport by the turbulent air flow. This assumption is also investigated for this uniform forest terrain.