Microplastic Contamination in Karst Groundwater Systems

Groundwater in karst aquifers constitutes about 25% of drinking water sources globally. Karst aquifers are open systems, susceptible to contamination by surface-borne pollutants. In this study, springs and wells from two karst aquifers in Illinois, USA, were found to contain microplastics and other anthropogenic contaminants. All microplastics were fibers, with a maximum concentration of 15.2 particles/L. The presence of microplastic was consistent with other parameters, including phosphate, chloride and triclosan, suggesting septic effluent as a source. More studies are needed on microplastic sources, abundance, and impacts on karst ecosystems.     

Partitioned by process: Measuring post-fire debris-flow and rill erosion with Structure from Motion photogrammetry

After wildfire, hillslope and channel erosion produce large amounts of sediment and can contribute significantly to long-term erosion rates. However, pre-erosion high-resolution topographic data (e.g. lidar) is often not available and determining specific contributions from post-fire hillslope and channel erosion is challenging. The impact of post-fire erosion on landscape evolution is demonstrated with Structure from Motion (SfM) Multi-View Stereo (MVS) photogrammetry in a 1 km² Idaho Batholith catchment burned in the 2016 Pioneer Fire. We use SfM-MVS to quantify post-fire erosion without detailed pre-erosion topography and hillslope transects to improve estimates of rill erosion at adequate spatial scales. Widespread rilling and channel erosion produced a runoff-generated debris-flow following modest precipitation in October 2016. We implemented unmanned aerial vehicle (UAV)-based SfM-MVS to derive a 5 cm resolution digital elevation model (DEM) of the channel scoured by debris-flow. In the absence of cm-resolution pre-erosion topography, a synthetic surface was defined by the debris-flow scour's geomorphic signature and we used a DEM of Difference (DoD) to map and quantify channel erosion. We found 3467 ± 422 m³ was eroded by debris-flow scour. Rill dimensions along hillslope transects and Monte Carlo simulation show rilling eroded ~1100 m³ of sediment and define a volume uncertainty of 29%. The total eroded volume (4600 ± 740 m³) we measured in our study catchment is partitioned into 75% channel erosion and 25% rill erosion, reinforcing the importance of catchment size on erosion process-dominance. The deposit volume from the 2016 event was 5700 ± 1140 m³, indicating ~60% contribution from post-fire channel erosion. Dating of charcoal fragments preserved in stratigraphy at the catchment outlet, and reconstructions of prior deposit volumes provide a record of Holocene fire-related debris-flows at this site; results suggest that episodic wildfire-driven erosion (~6 mm/year) dominate millennial-scale erosion (~5 mm/Ka) at this site. © 2019 John Wiley & Sons, Ltd. © 2019 John Wiley & Sons, Ltd.     

Crystallization of magmatic iron meteorites: The role of mixing in the molten core

Abstract— The IIIAB group is the largest of the magmatic iron meteorite groups and consequently is commonly used to test models of asteroid core crystallization. Simple fractional crystallization calculations appear to reproduce the general shape of the elemental trends observed in the IIIAB group when these trends are plotted vs. Ni, as is traditionally done. However, when the elemental trends are examined vs. another element (such as Ge vs. Ir), simple fractional crystallization fails to match a significant portion of the trend, specifically meteorites formed during the final stages of crystallization. Our simple mixing model, which attempts to account for the possibility of inhomogeneities in the molten metallic core, is able to reproduce the entire IIIAB trend observed. This model is a variant of simple fractional crystallization and involves mixing between a zone of liquid involved in the crystallization process and a second zone too far from the crystallizing solid to be actively involved in crystallization. This model does not suggest one unique solution for the method by which an asteroidal core crystallizes; rather it demonstrates that including the effects of mixing in the molten core can account for the observed IIIAB elemental trends, particularly the late-stage crystallizing members, which other models have difficulty explaining.     

Tropical Modernism: Designing the Tropical Landscape

The tropical gardens and landscape designs of the Brazilian landscapist, Roberto Burle Marx, are examined in relation to the historical development of the European concept of "the tropical". The argument is made that Burle Marx's pared down, austere, and abstract designs, which incorporate tropical plants in innovative fashion, yet make no effort to recreate or imitate a jungle experience, can be interpreted as offering a possible solution to the dialectic of nature and culture in a country burdened historically by the designation "tropical".     

Records of aquatic pollen and sediment properties as indicators of late-Quaternary Alaskan lake levels

We investigated whether techniques developed to evaluate qualitative lake-level changes in the temperate zone can be used in sub-arctic and arctic Alaska. We focused on aquatic pollen records and sediment properties (loss-on-ignition and magnetic susceptibility) from centrally-located sediment-surface samples and cores, as these are the most commonly reported data in the literature. Modern aquatic pollen values are generally low (< 5%) and may be zero, even in lakes with abundant aquatic macrophytes. Greater diversity and higher values of aquatic pollen are likely at depths < 5 m, but pollen is found in depths up to 15 m. It is absent at depths > 20 m. Spores of Isoetes and Equisetum and Pediastrum cell-nets, when present, tend to be widely distributed, even in deep water. At Birch Lake, interior Alaska, trends in aquatic taxa and sediment characteristics for the last ca. 12,000 ¹⁴C yrs recorded in a single, deep-water core reflect the same water-level changes as do transect-based lake-level reconstructions - if modern distributional characteristics of pollen and spores are taken into account. The lake rose from extremely low levels at ca. 12,000 ¹⁴C yr B.P. After a period of fluctuation, it rose to a relatively high level by ca. 8000 ¹⁴C yr B.P. and then stabilized. A preliminary survey of aquatic pollen trends from other lake-sediment records suggests that the period ca. 11,000-8000 ¹⁴C yr B.P. may have seen relatively low lake levels in north-western and interior Alaska and high levels thereafter. Changes in aquatic pollen and sediments are evident in north-eastern interior lakes at the same time, but they are more difficult to interpret. Aquatic pollen productivity in Alaskan lakes may partly depend on factors other than water depth (e.g. temperature, pH, nutrient status, or length of the ice-free season). An Alaska-wide reconstruction of late-Quaternary lake levels based on extant single-core data would be best done after further study of contributing factors that may control sediment properties and aquatic pollen distribution.     

Evaluation of criteria for predicting erosion and accretion on an estuarine sand beach, Delaware Bay, Jew Jersey

Predicting erosion and accretion of sand beaches in estuaries is important to managing shoreline development and identifying potential relationships between biological productivity and beach change. Wave, sediment and profile data, gathered over twenty-nine days on an estuarine sand beach in Delaware Bay, New Jersey, were used to evaluate the performance of four criteria that predict beach erosion and accretion due to wave-induced cross-shore sediment movement (Dean 1973; Sunamura and Horikawa 1974; Hattori and Kawamata 1980; Kraus et al. 1991). Each criterion defines a relation, between a wave and sediment parameter, and includes a coefficient that discriminates beach erosion and accretion events. Relations, based on small-scale laboratory and field data, were evaluated for predicting erosion or accretion at the study site. Significant wave heights at the study site, monitored near high water, ranged from 0.08 to 0.52 m with periods of 2.4 to 12.8 s. Median grain sizes of sediments on the beach foreshore, gathered at low water, ranged from 0.33 to 0.73 mm. All four criteria showed a clustering of erosion and accretion events. Relations derived from small-scale laboratory data were better predictors of erosion on the profile at the field site than those derived from field data gathered on exposed ocean environments. The planar profile and dominance of incident waves of low height and short period are similar to laboratory conditions characterized by initial planar beach slopes and monochromatic waves. Decreasing the value of the empirical coefficient to account for the differences in the magnitude of wave energy and grain size increases the performance of the criteria tested to predict erosion of the profile.     

Effects of a high rise building on wind flow and beach characteristics at Atlantic City, NJ, USA

This study assesses the effects of a high rise building on the beach and dune at an intensively developed shoreline through field investigation of geomorphological and sedimentological characteristics and wind tunnel investigation of wind speed and direction. Results indicate that wind speed is increased close to the building, where wind is often deflected to a more onshore direction. Obliquely offshore northwesterly winds are the most dramatically altered and cause onshore flows (with pronounced upward flows) in the landward portion of the beach near the building. Onshore deflections in wind direction cause besanding of the boardwalk and create highly localized scour and deposition zones. A dune on the backbeach breaks up zones of sediment transport and scour and diminishes the likelihood that scour areas will cause increased hazard to landward buildings as a result of flooding. Generic large-scale studies are required to develop criteria for communities to use to specify optimum dimensions, locations and shapes of landforms that are modified or created by high rise structures.     

Silicon in magnetite: High resolution microanalysis of magnetite-ilmenite intergrowths

Magnetite-ilmenite oxidation-exsolution intergrowths from an original titanomagnetite microphenocryst from an ash flow tuff unit have been studied using conventional transmission electron microscopy and analytical electron microscopy. Silicon has been found to be in solid solution in all of the magnetite studied and in some of the coexisting ilmenite. The average value in magnetite is 1.2 wt.% Si, equivalent to solid solution of 9 mole % Fe₂SiO₄. Silicon is also present in very small silicate inclusions and as unusual Si-rich domains of uncertain origin in magnetite. The inclusions and domains may be irregularly distributed through the magnetite in sizes well below those resolvable with the electron microprobe. Microprobe analyses for Si in magnetite generally reflect these heterogeneities in addition to a component presumably in solid solution. The petrologic implications of the data can be assessed only when relevant thermochemical data become available and the distribution of Si in magnetite is better understood.Contribution No. 376 from the Mineralogical Laboratory, Department of Geological Sciences, The University of Michigan