SIMD correlator library for GNSS software receivers

Software receivers have had a discernable impact on the GNSS research community. Often such receivers are implemented in a compiled programming language, such as C or C++. A software receiver must emulate the digital signal processing (DSP) algorithms executed on dedicated hardware in a traditional receiver. The DSP algorithms, most notably correlation, have a high computational cost; this burden precludes many software receivers from running in real time. However, the computational cost can be lessened by utilizing single instruction multiple data (SIMD) operations found on modern ×86 processors. The following demonstrates how C/C++ compatible code can be written to directly utilize the SIMD instructions. First, an analysis is carried out to demonstrate why real time operation is not possible when using traditional C/C++ code is carried out. Secondly a tutorial outlines how to write and insert ×86 assembly, with SIMD operations, into C/C++ code. Performance gains achieved via SIMD operations are then demonstrated, and pseudo code outlines how SIMD operations can be employed to perform correlation. Finally, a C/C++ compatible SIMD enabled arithmetic library is added to the GPS Toolbox for use in software receivers.     

Illumination effects on the differenced Normalized Burn Ratio's optimality for assessing fire severity

The influence of illumination effects on the optimality of the dNBR (differenced Normalized Burn Ratio) was evaluated for the case of the 2007 Peloponnese (Greece) wildfires using a pre/post-fire Landsat TM (Thematic Mapper) image couple. Well-illuminated pixels (south and south-east facing slopes) exhibited more optimal displacements in the bi-spectral feature space than more shaded pixels (north and north-west exposed slopes). Moreover, pixels experiencing a small image-to-image difference in illumination obtained a higher optimality than pixels with a relatively large difference in illumination. To correct for illumination effects, the c-correction method and a modified c-correction technique were applied. The resulting median dNBR optimality of uncorrected, c-corrected and modified c-correction data was respectively 0.58, 0.60 and 0.71 (differences significant for p < 0.001). The original c-correction method improved the optimality of badly illuminated pixels while deteriorating the optimality of well-illuminated pixels. In contrast, the modified c-correction technique improved the optimality of all the pixels while retaining the prime characteristic of topographic correction techniques, i.e. detrending the illumination–reflectance relationship. For a minority of the data, for shaded pixels and/or pixels with a high image-to-image difference in illumination, the original c-correction outperformed the modified c-correction technique. In this study conducted in rugged terrain and with a bi-temporal image acquisition scheme that deviated up to two months from the ideal anniversary date scheme the modified c-correction technique resulted in a more reliable change detection.     

Combining EGM2008 and SRTM/DTM2006.0 residual terrain model data to improve quasigeoid computations in mountainous areas devoid of gravity data

A global geopotential model, like EGM2008, is not capable of representing the high-frequency components of Earth’s gravity field. This is known as the omission error. In mountainous terrain, omission errors in EGM2008, even when expanded to degree 2,190, may reach amplitudes of 10 cm and more for height anomalies. The present paper proposes the utilisation of high-resolution residual terrain model (RTM) data for computing estimates of the omission error in rugged terrain. RTM elevations may be constructed as the difference between the SRTM (Shuttle Radar Topography Mission) elevation model and the DTM2006.0 spherical harmonic topographic expansion. Numerical tests, carried out in the German Alps with a precise gravimetric quasigeoid model (GCG05) and GPS/levelling data as references, demonstrate that RTM-based omission error estimates improve EGM2008 height anomaly differences by 10 cm in many cases. The comparisons of EGM2008-only height anomalies and the GCG05 model showed 3.7 cm standard deviation after a bias-fit. Applying RTM omission error estimates to EGM2008 reduces the standard deviation to 1.9 cm which equates to a significant improvement rate of 47%. Using GPS/levelling data strongly corroborates these findings with an improvement rate of 49%. The proposed RTM approach may be of practical value to improve quasigeoid determination in mountainous areas without sufficient regional gravity data coverage, e.g., in parts of Asia, South America or Africa. As a further application, RTM omission error estimates will allow refined validation of global gravity field models like EGM2008 from GPS/levelling data.     

Modeling preferential flow in reactive barriers: implications for performance and design

Reactive barriers are passive and in situ ground water treatment systems. Heterogeneities in hydraulic conductivity (K) within the aquifer-reactive barrier system will result in higher flux rates, and reduced residence times, through portions of the barrier. These spatial variations in residence time will affect the treatment capacity of the barrier. A numerical flow model was used to evaluate the effects of spatial variations in K on preferential flow through barriers. The simulations indicate that the impact of heterogeneities in K will be a function of their location and distribution; the more localized the high K zone, the greater the preferential flow. The geometry of the reactive barrier will also strongly influence flow distribution. Aquifer heterogeneities will produce greater preferential flow in thinner barriers compared to thicker barriers. If the barrier K is heterogeneous, greater preferential flow will occur in thicker barriers. The K of the barrier will affect the flow distribution; decreasing the K of the barrier can result in more even distribution of flow. Results indicate that less variable flow will be attained utilizing thicker, homogeneous barriers. The addition of homogeneous zones to thinner barriers will be effective at redistributing flow only if installed immediately adjacent to both the up- and downgradient faces of the barrier.     

Spaceborne gravitational field determination by means of locally supported wavelets

In space-borne gravitational field determination, two challenges are inherent. First, the continuation of the data down to the surface of the Earth is an ill-posed problem, requiring therefore regularization techniques. Second huge data sets result requiring efficient numerical methods. In this paper, we show how locally supported wavelets on the sphere can be developed by means of a spherical version of the so-called up function. By construction, the corresponding scaling functions and wavelets are infinitely smooth, so that they can be used for regularization purposes. In particular, we show how the ill-posed pseudo-differential equations coming from satellite missions can be regularized by efficient numerical schemes using locally supported wavelets. These methods seem in particular to be interesting for regional gravity field modelling.     

Internet teaching foundation for the Remote Sensing Core Curriculum program

The Remote Sensing Core Curriculum (RSCC) was initiated in 1993 to meet the demands for a college-level set of resources to enhance the quality of education across national and international campuses. The American Society of Photogrammetry and Remote Sensing adopted the RSCC in 1996 to sustain support of this educational initiative for its membership and collegiate community. A series of volumes, containing lectures, exercises, and data, is being created by expert contributors to address the different technical fields of remote sensing. The RSCC program is designed to operate on the Internet taking full advantage of the World Wide Web (WWW) technology for distance learning. The issues of curriculum development related to the educational setting, with demands on faculty, students, and facilities, is considered to understand the new paradigms for WW-influenced computer-aided learning. The WWW is shown to be especially appropriate for facilitating remote sensing education with requirements for addressing image data sets and multimedia learning tools. The RSCC is located at http://www.umbc.edu/rscc     

From GPS and GLONASS via EGNOS to Galileo – Positioning and Navigation in the Third Millennium

Positioning and navigation – as are presently possible with the American Global Positioning System (GPS) and the Russian GLONASS system – is briefly reviewed. Deficiencies, which have led to augmentations like the European Geostationary Navigation Overlay System (EGNOS), are outlined. Europe's decision to get involved in the definition and possible set-up of a Global Navigation Satellite System (GNSS) of the second generation (GNSS-2), called Galileo, is discussed in detail as well as the GPS modernization program that might take place during the sample phase. Finally, some brief thoughts on the benefit of GNSS-2 for geodesy and surveying are given. ? 2000 John Wiley & Sons, Inc.     

MoisturEC: A New R Program for Moisture Content Estimation from Electrical Conductivity Data

Noninvasive geophysical estimation of soil moisture has potential to improve understanding of flow in the unsaturated zone for problems involving agricultural management, aquifer recharge, and optimization of landfill design and operations. In principle, several geophysical techniques (e.g., electrical resistivity, electromagnetic induction, and nuclear magnetic resonance) offer insight into soil moisture, but data‐analysis tools are needed to “translate” geophysical results into estimates of soil moisture, consistent with (1) the uncertainty of this translation and (2) direct measurements of moisture. Although geostatistical frameworks exist for this purpose, straightforward and user‐friendly tools are required to fully capitalize on the potential of geophysical information for soil‐moisture estimation. Here, we present MoisturEC, a simple R program with a graphical user interface to convert measurements or images of electrical conductivity (EC) to soil moisture. Input includes EC values, point moisture estimates, and definition of either Archie parameters (based on experimental or literature values) or empirical data of moisture vs. EC. The program produces two‐ and three‐dimensional images of moisture based on available EC and direct measurements of moisture, interpolating between measurement locations using a Tikhonov regularization approach.