Sediment consolidation and archaeological site formation

Consolidation is the reduction in sediment volume that occurs in response to natural overburden loading. As void space is reduced, solid particles within the consolidating sediment undergo rearrangement, including downward displacement and reduction in inclination angle. Buried artifacts are also subject to this rearrangement. An experiment was designed to simulate consolidation of artifact‐bearing sediments and document the extent of artifact rearrangement caused by varying degrees of consolidation. Results indicate that artifacts will generally follow the downward movement of the sediment regardless of individual artifact attributes, and that significant reductions in artifact inclination angle can occur. © 2006 Wiley Periodicals, Inc.     

Cuttability assessment of hard coal seams

Summary A number of field and laboratory tests have been carried out on more than 15 coal seams of compressive strengths ranging from 19 MPa to 44 MPa to evolve methods which would help in the selection of suitable coaling machines for hard coal seams. The effect of physico-mechanical properties on cuttability were studied in the laboratory for all these coal seams to identify the relevant parameters affecting the specific energy of coal cuttability. These data were subjected to regression analysis to find the best fit for estimation of laboratory specific energy of coal samples on the basis of simple laboratory and field tests for the strength parameters. Field studies were also conducted over a large number of active mechanized coal faces to study in situ cuttability along with the geo-mining conditions of the site. The field and the laboratory data so generated were correlated and an attempt is made to establish a relationship for estimating the field specific energy for a particular capacity of coaling machines by considering the geo-mining domain of the field in totality.     

Viscous overstability and eccentricity evolution in three-dimensional gaseous discs

We investigate the growth or decay rate of the fundamental mode of even symmetry in a viscous accretion disc. This mode occurs in eccentric discs and is known to be potentially overstable. We determine the vertical structure of the disc and its modes, treating radiative energy transport in the diffusion approximation. In the limit of very long radial wavelength, an analytical criterion for viscous overstability is obtained, which involves the effective shear and bulk viscosity, the adiabatic exponent, and the opacity law of the disc. This differs from the prediction of a two-dimensional model. On shorter wavelengths (a few times the disc thickness), the criterion for overstability is more difficult to satisfy because of the different vertical structure of the mode. In a low-viscosity disc a third regime of intermediate wavelengths appears, in which the overstability is suppressed as the horizontal velocity perturbations develop significant vertical shear. We suggest that this effect determines the damping rate of eccentricity in protoplanetary discs, for which the long-wavelength analysis is inapplicable and overstability is unlikely to occur on any scale. In thinner accretion discs and in decretion discs around Be stars overstability may occur only on the longest wavelengths, leading to the preferential excitation of global eccentric modes.     

GEOELECTRIC MODELS IN ENGINEERING GEOPHYSICS*

Man's engineering activities are concentrated on the uppermost part of the earth's crust which is called engineering-geologic zone. This zone is characterized by a significant spatialtemporal variation of the physical properties status of rocks, and saturating waters. This variation determines the specificity of geophysical and, particularly, geoelectrical investigations. Planning of geoelectric investigations in the engineering-geologic zone and their subsequent interpretation requires a priori) geologic-geophysical information on the main peculiarities of the engineering-geologic and hydrogeologic conditions in the region under investigation. This information serves as a basis for the creation of an initial geoelectric model of the section. Following field investigations the model is used in interpretation. Formalization of this a priori) model can be achieved by the solution of direct geoelectric problems. An additional geologic-geophysical information realized in the model of the medium allows to diminish the effect of the “principle of equivalence” by introducing flexible limitations in the section's parameters. Further geophysical observations as well as the correlations between geophysical and engineering-geologic parameters of the section permit the following step in the specification of the geolectric model and its approximation to the real medium. Next correction of this model is made upon accumulation of additional information. The solution of inverse problems with the utilization of computer programs permits specification of the model in the general iterational cycle of interpretation.     

Stress Field Estimations for Colima Volcano, Mexico, Based on Seismic Data

 For first time, during 1991, seismic activity was recorded during an eruption at Colima volcano. We analyze these data to obtain a stress pattern using a composite focal mechanism technique. From the analysis of regional seismicity, the Tamazula Fault and the Armeria River appear as active features and the dip of the slab east of the Jalisco Block is approximately 12°. Southwest of Colima volcano a vertical alignment of seismic events was observed. We estimate five different composite focal mechanism solutions from our data set, which indicate a change of the stress field at the volcano after the 1991 eruption. These solutions suggest that the stress field in the volcanic edifice was controlled by stresses related to the emplacement of magma superimposed on the regional stress field. No evidence of active local faults in the volcanic edifice was found. We propose a model for the eruptive process that involves tilting of the volcanic edifice. Received: 15 October 1995 / Accepted: 26 October 1998     

基于CoLM模型的根分布对陆-气水热交换的影响研究:以玉米农田为例

利用2007—2008年辽宁锦州玉米农田生态系统野外观测站资料,基于CoLM模型对玉米根分布在陆-气水热通量模拟中的影响进行研究,结果表明:模型模拟性能随年际气象条件的差异而不同,与2007年相比,2008年生长季内降水偏多,感热和潜热模拟精度明显提高;决定根分布形态的50%和95%根总量土层深度(d50和d95)两个参数中,d50比d95敏感;根分布对土壤湿度的影响在极端干旱条件下很小,在一定土壤湿度范围内随土壤湿度及土层深度的增大而减小;在水汽通量各分量中,植物蒸腾受根分布影响最大,其次是土壤蒸发,而叶片蒸发不受影响;根分布对潜热和感热模拟的影响随土壤湿度增大而减小。     

Hyperspectral mapping of alteration assemblages within a hydrothermal vug at the Haughton impact structure,Canada

Meteorite impacts on Earth and Mars can generate hydrothermal systems that alter the primary mineralogies of rocks and provide suitable environments for microbial colonization. We investigate a calcite–marcasite‐bearing vug at the ~23 km diameter Haughton impact structure, Devon Island, Nunavut, Canada, using imaging spectroscopy of the outcrop in the field (0.65–1.1 μm) and samples in the laboratory (0.4–2.5 μm), point spectroscopy (0.35–2.5 μm), major element chemistry, and X‐ray diffraction analyses. The mineral assemblages mapped at the outcrop include marcasite; marcasite with minor gypsum and jarosite; fibroferrite and copiapite with minor gypsum and melanterite; gypsum, Fe³⁺ oxides, and jarosite; and calcite, gypsum, clay, microcline, and quartz. Hyperspectral mapping of alteration phases shows spatial patterns that illuminate changes in alteration conditions and formation of specific mineral phases. Marcasite formed from the postimpact hydrothermal system under reducing conditions, while subsequent weathering oxidized the marcasite at low temperatures and water/rock ratios. The acidic fluids resulting from the oxidation collected on flat‐lying portions of the outcrop, precipitating fibroferrite + copiapite. That assemblage then likely dissolved, and the changing chemistry and pH resulting from interaction with the calcite‐rich host rock formed gypsum‐bearing red coatings. These results have implications for understanding water–rock interactions and habitabilities at this site and on Mars.     

复杂地形区陆面资料对WRF模式模拟性能的影响

本文利用WRF（Weather Research and Forecasting）模式耦合Noah陆面过程模式,对比研究了使用不同精度陆面资料:WRF默认陆面资料、中国1 km分辨率数字高程模型数据集、2006年MODIS（MODerate-resolution Imaging Spectroradiometer）土地利用和植被覆盖度资料,WRF模式对兰州地区冬季气象场模拟结果的差异。结果表明,近地面气温对陆面资料的精度非常敏感,而风场对陆面资料的精度不敏感,WRF模式对气温的模拟效果好于对风场模拟。采用高精度且时效性好的陆面资料后,WRF模拟的近地面气温准确率提高了15.8%,模拟的夜间气温改进幅度较白天大。陆面资料可影响整个边界层温度场分布,准确的陆面资料对提高WRF模式模拟近地面乃至整个边界层气象场至关重要。尽管风速模拟误差较大,但总体上WRF模式能较准确地模拟出研究区的风场演变特征。使用新的陆面资料后WRF模拟的风速误差略有减小,风向误差略有增加。干旱半干旱区冬季数值模拟需要注意土壤湿度初值和模式初始积分时刻对模拟结果的影响。     

九龙江河口区表层水铀同位素的粒级分布

利用微滤和超滤技术研究了九龙江河口区表层水中铀及其同位素组成的粒级分布和地球化学行为.结果表明,溶解态(<0.4μm)中低分子量组分(<10 000 u)占主要份额,胶体态(10 000 u~0.4μm)238U所占比例不足1%,且随盐度的增加其所占份额逐渐降低.溶解态、低分子量组分和胶体态238U的比活度与盐度之间存在良好的线性正相关关系,证实它们在九龙江河口区呈现保守行为.在颗粒态(>0.4μm)中,各粒级组分238U所占份额主要受控于相应颗粒物的浓度,在盐度小于20的区域,各粒级颗粒组分238U占颗粒态的份额有如下变化次序:10~53μm>2~10μm>0.4~2μm>大于53μm,而在盐度大于30的近外海站位,该次序发生一些变化:0.4~2μm>10~53μm>2~10μm>大于53μm,最小粒级颗粒组分238U的贡献有所增加,反映了自生铀贡献的加强.九龙江河口区表层水中溶解态(包括低分子量组分和胶体态)的234U/238U)_A.R.均大于1,显示出234U过剩的特征,而各粒级颗粒组分中的234U/238U)_A.R.则接近于平衡值(1.0).这一现象与陆地岩石风化过程中水体对铀的淋滤释出量及234U的优先浸出有关.对232Th/238U质量比的研究显示,溶解态及其所包括的低分子量组分和胶体态的232Th/238U质量比均小于1,而颗粒态及其所包括的4个粒级组分中的232Th/238U质量比均大于1,反映了向外海输送过程中铀、钍地球化学行为的差异.     

Geodynamic setting,structure, and composition of continuous trachybasalt-trachyandesite-rhyolite series in the north of Altai-Sayan area: the role of crust-mantle interaction in continental magma formation

The geologic positions and geochemical and isotope parameters of the Ordovician-early Silurian and Early-Middle Devonian continuous volcanic series of the Minusa basin and its mountainous framing are compared. Both series are composed mostly of moderately alkaline rocks with variations in SiO₂ contents from 45 to 77 wt.%. The Ordovician-early Silurian series differs from the Early-Middle Devonian one in lower contents of TiO₂ (< 1.7 wt.%) and Fe₂O_3tot and higher contents of Al₂O₃ in all rock varieties and in the more fractionated REE patterns of trachybasalts. The compositions of both series reflect two simultaneous mechanisms of magma evolution. The main process was fractional crystallization leading to the formation of rocks from trachybasalts to trachyrhyodacites. The accessory mechanism was the contamination of fractionated melts by crustal material, anatectic melting of crust, and mixing of deep-seated magmas with crustal melts. These processes had specifics at each stage and were controlled by the composition of the sources of parental melts. Their geochemical and isotopic parameters (high alkalinity, high contents of lithophile elements, negative anomalies of Nb, Ta, and Ti, and enrichment in radiogenic Sr) point to the interaction of mantle plumes with the lithospheric mantle that was metasomatically transformed during the preceding Vendian-early Cambrian subduction processes.