Dambreak flood impact on mountain stream bedload transport after 13 years

Studies of the bedload transport regime of the Roaring River, Colorado, in 1984–88, following a dambreak flood in 1982, showed that bedload transport rates were an order of magnitude higher than under pre-flood conditions. A gorge eroded by the flood in glacial moraine acted as a major sediment supply source. Measurements in early June 1995 showed a continued potential for high sediment supply from the gorge and a bedload transport regime similar to that of 1984–88. A major snowmelt flood in mid-June flushed sediment supplies from the gorge and measurements in July showed a corresponding reduction in bedload transport. However, high sediment supply will continue until the gorge cliffs revegetate or erode to a stable slope. The measurements demonstrate both the control exercised by sediment supply on transport rates and the persistent long-term impact of major floods on mountain streams. © 1998 John Wiley & Sons, Ltd.     

Nexus between natural and technical disaster shocks,resource depletion and growth-specific factors: evidence from quantile regression

Natural Hazards - Debris flows are a hazardous natural calamity in mountainous regions of Nepal. Torrential rainfall within a very short period of the year is the main triggering factor for...     

Scenario-based seismic hazard analysis using spectral element method in northeastern Pakistan

Natural Hazards - Seismic hazard analysis is carried out in this study by estimating ground motion for hypothetical earthquakes in the area of Muzaffarabad, Pakistan, with the MT solution of the...     

Integration of geoelectric and hydrochemical approaches for delineation of groundwater potential zones in alluvial aquifer

Geoelectric and hydrochemical approaches are employed to delineate the ground-water potential zones in District Okara, a part of Bari Doab, Punjab, Pakistan. Sixty-seven VES surveys are conducted with the Electrical Resistivity Meter. The resultant resistivity verses depth model for each site is estimated using computer-based software IX1D. Aquifer thickness maps and interpreted resistivity maps were generated from interpreted VES results. Dar-Zarrouk parameters, transverse resistance (TR), longitudinal conductance (SL) and anisotropy (λ) were also calculated from resistivity data to delineate the potential zones of aquifer. 70% of SL value is ≤3S, 30% of SL value is > 3S. According to SL and TR values, the whole area is divided into three potential zones, high, medium and low potential zones. The spatial distribution maps show that north, south and central parts of study area are marked as good potential aquifer zones. Longitudinal conductance values are further utilized to determine aquifer protective capacity of area. The whole area is characterized by moderate to good and up to some extent very good aquifer protective area on the basis of SL values. The groundwater samples from sixty-seven installed tube wells are collected for hydro-chemical analysis. The electrical conductivity values are determined. Correlation is then developed between the EC (μS/cm) of groundwater samples vs. interpreted aquifer resistivity showing R2 value 0.90.     

First Record of the Belemnite Genus Hibolithes from Late Jurassic–Early Cretaceous Turbidites from Malaysia

Discovery of the remains of belemnites referred to the Hibolithes sp. from the Jurassic–Cretaceous Pedawan Formation in Sarawak, on the island of Borneo(Malaysia) comprises four fragments of belemnite rostra. The specimens are characterized by multiple fractures and vein filling. Two fragments measuring about 130 mm are relatively intact, with only part of the alveolar region missing; a third piece represents the middle part of a rostrum, and the fourth specimen is too fragmentary to be assigned to any specific part of the rostrum. Based on specimen characteristics, a Tithonian–Hauterivian age is plausible. The sedimentary succession that yielded the belemnite material comprises thick shale that reflects the Te division of Bouma sequence. The occurrence of a Hibolithes taxon in the uppermost Jurassic to lowermost Cretaceous Pedawan Formation sediments in Borneo reflects a near to global palaeobiogeographic distribution of this genus.     

Landslide inventory and susceptibility modelling using geospatial tools,in Hunza-Nagar valley,northern Pakistan

A comprehensive landslide inventory and susceptibility maps are prerequisite for developing and implementing landslide mitigation strategies. Landslide susceptibility maps for the landslides prone regions in northern Pakistan are rarely available. The Hunza-Nagar valley in northern Pakistan is known for its frequent and devastating landslides. In this paper, we have developed a landslide inventory map for Hunza-Nagar valley by using the visual interpretation of the SPOT-5 satellite imagery and mapped a total of 172 landslides. The landslide inventory was subsequently divided into modelling and validation data sets. For the development of landslide susceptibility map seven discrete landslide causative factors were correlated with the landslide inventory map using weight of evidence and frequency ratio statistical models. Four different models of conditional independence were used for the selection of landslide causative factors. The produced landslides susceptibility maps were validated by the success rate and area under curves criteria. The prediction power of the models was also validated with the prediction rate curve. The validation results shows that the success rate curves of the weight of evidence and the frequency models are 82% and 79%, respectively. The prediction accuracy results obtained from this study are 84% for weight of evidence model and 80% for the frequency ratio model. Finally, the landslide susceptibility index maps were classified into five different varying susceptibility zones. The validation and prediction result indicates that the weight of evidence and frequency ratio model are reliable to produce an accurate landslide susceptibility map, which may be helpful for landslides management strategies.     

Petrography,geochemistry and provenance of the sediments of the Early Cretaceous Yanguoxia Formation,Lanzhou-Minhe Basin,Northwest China

Lanzhou-Minhe Basin is situated on the middle Qilian orogenic belt. Yanguoxia Formation contains abundance of maroon siltstones, mudstones and red sandstones of the lake facies. These sedimentary rocks recorded the process of the tectonic uplift of Qilian Mountains during the Early Cretaceous. We discovered plentiful dinosaur footprints, worm burrows, bird footprints, worm tracks-trails, ripple marks and cross lamination in the Yanguoxia site. Integrated petrographic studies classified sandstones of Yanguoxia Formation as feldspathic litharenite. All plots in the QFL (Q or Qt, total quartz; F, feldspar; L, lithic grains) and QmFLt (Qm, monocrystalline quartz; Lt, lithic grains plus polycrystalline quartz) diagrams fall in the recycled orogen provenance field and quartzose recycled field, respectively, implying the source occurred the tectonic activity. Furthermore, geochemical study indicates that the Yanguoxia standstone was formed in an unstable continental setting due to the northwards movement of Indian Plate triggered the collision between the Qilian fold belt and the Qinling fold belt. These sediments were derived from a mixed source and then deposited in the Lanzhou-Minhe Basin. Most of the felsic components were derived from the granitoid rocks of the Qilian Mountains due to the rapid and intense uplift during the Early Cretaceous while the mafic components were contributed by the basic and ultrabasic rocks of the rapidly rising ophiolite in the Qilian Mountain area. Bivariant log-log plot of Qp/(F+L) (Qp, polycrystalline quartz) against Q/(F+L) shows that Yanguoxia Formation was deposited in the semi-humid and semi-arid. Moreover, the pollen also exhibits that the environmental condition during the deposition of Yanguoxia Formation was warm and wet, which affirm such environment was benefit to dinosaur survival. Geochemical study also infers that the Yanguoxia Formation was deposited under the oxidizing condition in a shallow marine environment. The minerals identified from the X-ray diffraction (XRD) analysis of shale and siltstone samples are 4.74%-33.53% clays, 23.45%-4l.70% carbonates and 33.99%-71.81% quartz, respectively, which infer that depositional conditions remained uniform during the formation of shales or siltstones of Yanguoxia Formation.     

Spatial modeling of Dengue prevalence and kriging prediction of Dengue outbreak in Khyber Pakhtunkhwa (Pakistan) using presence only data

Stochastic Environmental Research and Risk Assessment - During the span of August–October, 2017 a major outbreak of Dengue fever happened in Khyber Pakhtunkhwa province of Pakistan. Cases...     

Investigating effect of climate change on drought propagation from meteorological to hydrological drought using multi-model ensemble projections

Stochastic Environmental Research and Risk Assessment - Climate change is a main driving force that affects the hydrological cycle, leading to an increase in natural hazards. Among these natural...     

Characteristics and Health Risk Assessment of Potentially Toxic Metals in Urban Topsoil in Shenyang City,Northeast China

Soil samples are collected from 74 sites in Shenyang city, northeast China, and the concentrations, spatial distribution, enrichment factors (EF), and potential ecological and human health risk (E_r) of potentially toxic metals (Sr, Zn, Cr, Pb, Cu, Ni, and As) are investigated. The mean concentrations of potentially toxic metals in topsoil follow the order Sr > Zn > Cr > Pb > Cu > Ni > As. Compared with 2011, the contamination magnitude has improved in 2017, but the pollution status still exists, especially for As and Cr. EF and the mean E_r of potentially toxic metals decrease following the order As > Pb > Cu > Ni > Zn > Cr > Sr and As > Cu > Zn > Pb > Sr > Ni > Cr, suggesting that the potentially toxic metals in the topsoil of Shenyang city mainly come from natural sources, and the potential ecological risk for potentially toxic metals is low. There are potentially non‐carcinogenic and carcinogenic health risks, but they are not considered significant. For non‐carcinogenic health risks, oral ingestion is the main exposure pathway, and Cr and Pb are the major pollutants. Finally, As is found to be the main carcinogenic contamination metal.