A new approach to plane failure of rock slope stability based on water flow velocity in discontinuities for the Latian dam reservoir landslide

The stability of slopes is always of great concern in the field of rock engineering. The geometry and orientation of pre-existing discontinuities show a larger impact on the behavior of slopes that is often used to describe the measurement of the steepness, incline, gradient, or grade of a straight line. One of the structurally controlled modes of failure in jointed rock slopes is plane failure. There are numerous analytical methods for the rock slope stability including limit equilibrium, stress analysis and stereographic methods. The limiting equilibrium methods for slopes under various conditions against plane failure have been previously proposed by several investigators. However, these methods do not involve water pressure on sliding surfaces assessments due to water velocity and have not yet been validated by case study results. This paper has tried to explore the effects of forces due to water pressure on discontinuity surfaces in plane failure through applying the improved equations. It has studied the effect of water flow velocity on sliding surfaces in safety factor, as well. New equations for considering water velocity (fluid dynamics) are presented. To check the validity of the suggested equations, safety factor for a case study has been determined. Results show that velocity of water flow had significant effect on the amount of safety factor. Also, the suggested equations have higher validity rate compared to the current equations.     

Block size selection with the objective of minimizing the discrepancy in real and estimated block grade

The valuation of a mining project depends upon the accuracy of geological block model. Sampling density, estimation method, and proper block size mainly affect the accuracy of estimated block. This paper aims to answer three questions: (1) which estimation method is more accurate, (2) what is the relation between sampling density and block size, and (3) what the optimum block size is. Conditional Gaussian simulation (CGS) was used to generate a hypothetical deposit, considered as a real block model. A range of different block dimensions were estimated by ordinary kriging, inverse squared distance, and nearest neighbor methods based on tow-simulated drilling grids database. The comparison of estimated and real block grades reveals that increasing the sampling density results the similar outcomes of geostatistics and deterministic interpolation methods. Furthermore, it was deduced that sampling density could not be a viable alternative in choosing appropriate block dimension and the variogram rang a was suggested as an affective parameter in block size selection. Then a geometrical formula was developed to obtain the block size based on the variogram range. The increment in project value that a mine planner can expected from the additional information of the dense drilling grid was also calculated and it was concluded that the block size obtained based on the suggested formula results acceptable information value. Finally, the database of Chador Malu iron ore mine which is located in 180 km northeast of Yazd city in the central part of Iran were used to validate the suggested formula.     

First Record of Sexual Dimorphism in Toxasterid Echinoid Heteraster from the Early Cretaceous Deposits of the Kopet-Dagh Basin,NE Iran

Spatangoid echinoids belonging to Heteraster found in the Lower Cretaceous limestones and calcareous deposits of the Tirgan and Sarcheshmeh formations(Barremian–Aptian) in the Bahman jan-Bala stratigraphic section on the northern flank of the Borouj syncline, situated in the eastern Kopet-Dagh Basin, northeastern Iran are assessed as a sexually dimorphic species. Sexual dimorphism is a common feature in echinoids and, in this study of Heteraster renngarteni Poretzkaja, 1961, sexual dimorphism ha...     

GeoTxt: A scalable geoparsing system for unstructured text geolocation

In this article we present GeoTxt, a scalable geoparsing system for the recognition and geolocation of place names in unstructured text. GeoTxt offers six named entity recognition (NER) algorithms for place name recognition, and utilizes an enterprise search engine for the indexing, ranking, and retrieval of toponyms, enabling scalable geoparsing for streaming text. GeoTxt offers a flexible application programming interface (API), allowing for customized attribute and/or spatial ranking of retrieved toponyms. We evaluate the system on a corpus of manually geo‐annotated tweets. First, we benchmark the performance of the six NERs that GeoTxt provides access to. Second, we assess GeoTxt toponym resolution accuracy incrementally, demonstrating improvements in toponym resolution achieved (or not achieved) by adding specific heuristics and disambiguation methods. Compared to using the GeoNames web service, GeoTxt's toponym resolution demonstrates a 20% accuracy gain. Our results show that places mentioned in the same tweet do not tend to be geographically proximate.     

Luminescence dating of the last earthquake of the Sabzevar thrust fault, NE Iran

Iran is one of the world's most tectonically active regions, yet dating past earthquakes for neotectonic studies has been limited. One of the main reasons for this is that organic material suitable for radiocarbon dating of deformed sediments is rare. We investigate the use of infrared stimulated luminescence (IRSL) from coarse-grained feldspars to date colluvial deposits associated with the Sabzevar thrust fault in northeastern Iran. The single-aliquot regenerative (SAR) dose measurement procedure was used for this study. The current study investigates monitoring and correcting for sensitivity changes, recovering a known laboratory dose and equivalent dose estimation using three SAR IRSL methods. It is shown that SAR has recovered a given laboratory dose using a range of preheat temperatures but D_e determination of natural samples requires its own preheat plateaus for two of these SAR methods. The SAR IRSL method provided an age of 1.7±0.3 ka for colluvium, predating the last earthquake event on the Sabzevar fault. This result suggests that this fault is likely to be responsible for an earthquake that destroyed Sabzevar city in AD 1052.     

Discovery of two ophiolite complexes of different ages in the Khoy area (NW Iran)

New field and laboratory studies on the ophiolite of Khoy (northwestern corner of Iran) lead to the discovery that there are not one, but two ophiolitic complexes in the Khoy area: (1) an old, poly-metamorphic ophiolite, whose oldest metamorphic amphiboles yielded a Lower Jurassic apparent ⁴⁰K–⁴⁰Ar age, and whose primary magmatic age should logically be pre-Jurassic (Upper-Triassic?); (2) a younger non metamorphic ophiolite of well dated Upper Cretaceous age. To cite this article: M. Khalatbari-Jafari et al., C. R. Geoscience 335 (2003).     

A late Pleistocene long pollen record from Lake Urmia, NW Iran

A palynological study based on two 100-m long cores from Lake Urmia in northwestern Iran provides a vegetation record spanning 200 ka, the longest pollen record for the continental interior of the Near East. During both penultimate and last glaciations, a steppe of Artemisia and Poaceae dominated the upland vegetation with a high proportion of Chenopodiaceae in both upland and lowland saline ecosystems. While Juniperus and deciduous Quercus trees were extremely rare and restricted to some refugia, Hippophaë rhamnoides constituted an important phanerophyte, particularly during the late last glacial period. A pronounced expansion in Ephedra shrub-steppe occurred at the end of the penultimate late-glacial period but was followed by extreme aridity that favoured an Artemisia steppe. Very high lake levels, registered by both pollen and sedimentary markers, occurred during the middle of the last glaciation and late part of the penultimate glaciation. The late-glacial to early Holocene transition is represented by a succession of Hippophaë, Ephedra, Betula, Pistacia and finally Juniperus and Quercus. The last interglacial period (Eemian), slightly warmer and moister than the Holocene, was followed by two interstadial phases similar in pattern to those recorded in the marine isotope record and southern European pollen sequences.     

A comparative study of the hypoplasticity and the fabric‐dependent dilatant double shearing models for granular materials

In this paper, we consider the mechanical response of granular materials and compare the predictions of a hypoplastic model with that of a recently developed dilatant double shearing model which includes the effects of fabric. We implement the constitutive relations of the dilatant double shearing model and the hypoplastic model in the finite element program ABACUS/Explicit and compare their predictions in the triaxial compression and cyclic shear loading tests. Although the origins and the constitutive relations of the double shearing model and the hypoplastic model are quite different, we find that both models are capable of capturing typical behaviours of granular materials. This is significant because while hypoplasticity is phenomenological in nature, the double shearing model is based on a kinematic hypothesis and microstructural considerations, and can easily be calibrated through standard tests. Copyright © 2006 John Wiley & Sons, Ltd.