Assessment of bioclimatic comfort conditions based on Physiologically Equivalent Temperature (PET) using the RayMan Model in Iran

In this study thermal comfort conditions are analyzed to determine possible thermal perceptions during different months in Iran through the Physiologically Equivalent Temperature (PET). The monthly PET values produced using the RayMan Model ranged from ?7.6°C to 46.8°C. Over the winter months the thermal comfort condition (18–23°C) were concentrated in southern coastal areas along the Persian Gulf and Oman Sea. Most of the country experienced comfort conditions during the spring months, in particular in April, while during the summer months of July and August no thermal comfort conditions were observed. In November coastal areas of the Caspian Sea had the same physiological stress level of thermal comfort as April. The map produced showing mean annual PET conditions demonstrated the greatest spatial distribution of comfortable levels in the elevation range from 1000 to 2000 meter a.s.l., with annual temperatures of 12–20°C and annual precipitation of under 200 mm. The statistical relationship between PET conditions and each controlling parameter revealed a significant correlation in areas above 2000 meter, annual temperature over 20°C and annual precipitation of 200–400 mm with a correlation coefficient (R ²) of 0.91, 0.97 and 0.96, respectively.     

Surface water quality contamination source apportionment and physicochemical characterization at the upper section of the Jakara Basin, Nigeria

The present study investigates the surface water quality of three important tributaries of Jakara Basin, northwestern Nigeria to provide an overview of the relationship and sources of physicochemical and biological parameters. A total of 405 water samples were collected from 27 sampling points and analyzed for 13 parameters: dissolved oxygen (DO), 5-day biochemical oxygen demand (BOD₅), chemical oxygen demand (COD), suspended solids (SS), pH, ammonia-nitrogen (NH₃NL), dissolved solids (DS), total solids (TS), nitrates (NO₃), chloride (Cl), phosphates (PO₄), Escherichia coli (E. coli) and fecal coliform bacteria (FCB). Pearson’s product–moment correlation matrix and principal component analysis (PCA) were used to distinguish the main pollution sources in the basin. Four varimax components were extracted from PCA, which explained 84.86, 83.60, and 78.69 % of the variation in the surface water quality for Jakara, Tsakama, and Gama-Kwari Rivers, respectively. Strong positive loading included BOD₅, COD, NH₃NL, E. coli, and FCB with negative loading on DO attribute to a domestic waste water pollution source. One-way ANOVA revealed that there was no significant difference in the mean of the three water bodies (p?>?0.05). It is therefore recommended that the government should be more effective in controlling the point source of pollution in the area.     

Geomorphological investigation of possible impact evidences for the crater-shaped structure of Zirouki in Samsour Desert, SE Iran

Despite the extensive records on geomorphological studies in Iran, meteorite impact craters have so far not been considered in to account. Based on both remote sensing technique and field work we have recognized the circular structure of Zirouki crater in the Samsour desert, southeast of Iran, which if confirmed as an impact structure, would be the third impact structure candidate in the Middle East after the Wabar craters in Saudia Arabia and Jebel Waqf as Suwwan in Jordan. Geomorphological investigation of the possible impact structure of Zirouki crater was done based on multi criteria methodology including of geological, topographical, geophysical and petrographical studies. Among different studies, topographical investigation indicated that the crater shape morphology was quite obvious with a central uplift projection; as well geophysical pattern provided very strong evidence for possible impact structure, indicating the presence of circular negative gravity anomaly at the whole of the crater.     

Assessment of drought hazard impact on wheat cultivation using standardized precipitation index in Iran

The assessment of drought hazard impacts on wheat cultivation as a strategic crop in Iran is essential for making mitigation plans to reduce the impact of drought. Standardized precipitation index has gained importance in recent years as a potential drought indicator and is being used more frequently for assessment of drought hazard in many countries. In the present study, the calculated standardized precipitation index for 48 stations dataset in the 30-year time scale fulfilled 30 statistical matrices. The drought hazard index map was produced by sum overlaying the spatial representations of 30 statistical matrices and categorized into four levels of low, moderate, high, and very high, which demonstrated probability of drought occurrences of 10–20 %, 20–30 %, 30–40 %, and 40–50 %, respectively. Finally, after the general division of zonal statistics in drought hazard index map of Iran, major drought hazard zones were geographically classified into five zones. The statistical analysis showed a significant correlation (R ²?=?0.701 to 0.648) between drought occurrences and wheat cultivation including surface area and total production for these drought hazard zones.     

Determination of optimum relaxation coefficient using finite difference method for groundwater flow

Solution of Laplace’s equation can be done by iteration methods likes Jacobi, Gauss–Seidel, and successive over-relaxation (SOR). There is no new knowledge about the relaxation coefficient (ω) in SOR method. In this paper, we used SOR for solving Laplace’s differential equation with emphasis to obtaining the optimum (minimum) number of iterations with variations of the relaxation coefficient (ω). For this purpose, a code in FORTRAN language has been written to show the solution of a set of equations and its number of iterations. The results demonstrate that the optimum value of ω with minimum iterations is achieved between 1.7 and 1.9. Also, with increasing β?=??x/?y from 0.25 to 10, the number of iterations reduced and the optimum value is obtained for β?=?2.     

Relocation processing of selected earthquakes in the Gulf of Aqaba region

Earthquakes in the Gulf of Aqaba were compiled from the Jordan Seismological Observatory bulletins, Saudi Arabia (SNSN, King Abdulaziz City for Science and Technology), and Egypt (National Research Institute of Astronomy and Geophysics, Helwan) sources and were relocated after reexamining the P and S arrival times, testing the efficiency of stations used to determine the location of Aqaba events, calculating the average value of V _p/V _s, and choosing the best crustal model for the study area. The earthquake epicenters are distributed along the eastern side of the Gulf of Aqaba.     

Mapping of the soil texture using geostatistical method (a case study of the Shahrekord plain, central Iran)

Soil texture is a key variable that reflect a number of soil properties such as soil permeability, water holding capacity, nutrient storage and availability, and soil erosion. The main objective of this study was to produce the kriged maps of soils of the Shahrekord region, central Iran. One hundred four soil samples were collected on a 375-m² sampling grid from the depths of 0–30, 30–60, and 60–100 centimeter, and their particle sizes were determined using hydrometer method. The results showed a moderately spatial correlation in the soil particles among sampling soil layers and across the study area. Moreover, increasing clay and therewith observation of heavier soil textures is evident from surface to subsurface layers of the soils in the studied area due to rainfall and/or irrigation agriculture. These findings indicated that study of the soil texture variation with depth can be used as a clue for site-specific management and precision agriculture. Moreover, we suggest further analysis by using other data layers like topographical parameters, land use, parent material, soil erosion, and any other information which might influence the spatial distribution of soil texture.     

A Bonded Particle Model Simulation of Shear Strength and Asperity Degradation for Rough Rock Fractures

Different failure modes during fracture shearing have been introduced including normal dilation or sliding, asperity cut-off and degradation. Attempts have been made to study these mechanisms using analytical, experimental and numerical methods. However, the majority of the existing models simplify the problem, which leads to unrealistic results. With this in mind, the aim of this paper is to simulate the mechanical behaviour of synthetic and rock fracture profiles during direct shear tests by using the two-dimensional particle flow computer code PFC2D. Correlations between the simulated peak shear strength and the fracture roughness parameter D _R1 recently proposed by Rasouli and Harrison (2010) are developed. Shear test simulations are carried out with PFC2D and the effects of the geometrical features as well as the model micro-properties on the fracture shear behaviour are studied. The shear strength and asperity degradation processes of synthetic profiles including triangular, sinusoidal and randomly generated profiles are analysed. Different failure modes including asperity sliding, cut-off, and asperity degradation are explicitly observed and compared with the available models. The D _R1 parameter is applied to the analysis of synthetic and rock fracture profiles. Accordingly, correlations are developed between D _R1 and the peak shear strength obtained from simulations and by using analytical solutions. The results are shown to be in good agreement with the basic understanding of rock fracture shear behaviour and asperity contact degradation.     

Stability Analysis of Rock Slopes Against Block-Flexure Toppling Failure

Block-flexure is the most common type of toppling failure in rock slopes. In this case, some rock blocks fail due to tensile bending stresses and some overturn under their own weights. In this paper, first, a literature review of toppling failures is summarized. Then, a theoretical model is proposed for rock slopes with a potential for block-flexure toppling instability. Next, a new analytical approach is presented for the stability analysis of such slopes. Finally, a special computer code is developed for a quick stability assessment of the failures based on the proposed method. This code receives the rock slope parameters from the user as the input data and predicts its stability, along with the corresponding factor of safety against the failure, as the output. In addition, two case studies are used for practical verification of the proposed approach and the corresponding computer code as well.     

Geochemistry of Carboniferous Sandstones (Sardar Formation), East‐Central Iran: Implication for Provenance and Tectonic Setting

Geochemical analysis of sandstones from the Sardar Formation (from two stratigraphic successions) in east-central Iran were used for identification of geochemical characterization of sandstones, provenance and tectonic setting. Sandstones in the two lithostratigraphic successions have similar chemical compositions suggesting a common provenance. Bulk-rock geochemistry analysis of Carboniferous sandstones from Sardar Formation indicates that they are mainly quartz dominated and are classified as quartzarenites, sublitharenites and subarkoses, derived from acid igneous to intermediate igneous rocks. Discrimination function analysis indicates that the sandstones of Sardar Formation were derived from quartzose sedimentary provenance in a recycled orogenic setting. Also, major and trace elements in sandstones of Sardar Formation (e.g., K2O/Na2O vs. SiO2) indicate deposition in a stable passive continental margin (PM). Chemical index of alteration (CIA) for these rocks (> 65%) suggests a moderate to relatively high degree of weathering in the source area.