Mesozoic transtensional basin history of the Eastern Cordillera, Colombian Andes: Inferences from tectonic models

Backstripping analysis and forward modeling of 162 stratigraphic columns and wells of the Eastern Cordillera (EC), Llanos, and Magdalena Valley shows the Mesozoic Colombian Basin is marked by five lithosphere stretching pulses. Three stretching events are suggested during the Triassic–Jurassic, but additional biostratigraphical data are needed to identify them precisely. The spatial distribution of lithosphere stretching values suggests that small, narrow (<150 km), asymmetric graben basins were located on opposite sides of the paleo-Magdalena–La Salina fault system, which probably was active as a master transtensional or strike-slip fault system. Paleomagnetic data suggesting a significant (at least 10°) northward translation of terranes west of the Bucaramanga fault during the Early Jurassic, and the similarity between the early Mesozoic stratigraphy and tectonic setting of the Payandé terrane with the Late Permian transtensional rift of the Eastern Cordillera of Peru and Bolivia indicate that the areas were adjacent in early Mesozoic times. New geochronological, petrological, stratigraphic, and structural research is necessary to test this hypothesis, including additional paleomagnetic investigations to determine the paleolatitudinal position of the Central Cordillera and adjacent tectonic terranes during the Triassic–Jurassic. Two stretching events are suggested for the Cretaceous: Berriasian–Hauterivian (144–127 Ma) and Aptian–Albian (121–102 Ma). During the Early Cretaceous, marine facies accumulated on an extensional basin system. Shallow-marine sedimentation ended at the end of the Cretaceous due to the accretion of oceanic terranes of the Western Cordillera. In Berriasian–Hauterivian subsidence curves, isopach maps and paleomagnetic data imply a (>180 km) wide, asymmetrical, transtensional half-rift basin existed, divided by the Santander Floresta horst or high. The location of small mafic intrusions coincides with areas of thin crust (crustal stretching factors >1.4) and maximum stretching of the subcrustal lithosphere. During the Aptian–early Albian, the basin extended toward the south in the Upper Magdalena Valley. Differences between crustal and subcrustal stretching values suggest some lowermost crustal decoupling between the crust and subcrustal lithosphere or that increased thermal thinning affected the mantle lithosphere. Late Cretaceous subsidence was mainly driven by lithospheric cooling, water loading, and horizontal compressional stresses generated by collision of oceanic terranes in western Colombia. Triassic transtensional basins were narrow and increased in width during the Triassic and Jurassic. Cretaceous transtensional basins were wider than Triassic–Jurassic basins. During the Mesozoic, the strike-slip component gradually decreased at the expense of the increase of the extensional component, as suggested by paleomagnetic data and lithosphere stretching values. During the Berriasian–Hauterivian, the eastern side of the extensional basin may have developed by reactivation of an older Paleozoic rift system associated with the Guaicáramo fault system. The western side probably developed through reactivation of an earlier normal fault system developed during Triassic–Jurassic transtension. Alternatively, the eastern and western margins of the graben may have developed along older strike-slip faults, which were the boundaries of the accretion of terranes west of the Guaicáramo fault during the Late Triassic and Jurassic. The increasing width of the graben system likely was the result of progressive tensional reactivation of preexisting upper crustal weakness zones. Lateral changes in Mesozoic sediment thickness suggest the reverse or thrust faults that now define the eastern and western borders of the EC were originally normal faults with a strike-slip component that inverted during the Cenozoic Andean orogeny. Thus, the Guaicáramo, La Salina, Bitúima, Magdalena, and Boyacá originally were transtensional faults. Their oblique orientation relative to the Mesozoic magmatic arc of the Central Cordillera may be the result of oblique slip extension during the Cretaceous or inherited from the pre-Mesozoic structural grains. However, not all Mesozoic transtensional faults were inverted.     

Correlations in aftershock and seismicity patterns

Correlations in space and time play a fundamental role in earthquake processes. One direct manifestation of the effects of correlations is the occurrence of aftershocks due to the stress transfer in the vicinity of a main shock. Less obvious and more speculative changes in correlations may occur in the background seismicity before large earthquakes. Using statistical physics it is possible to introduce a measure of spatial correlations through a correlation length. This quantity characterizes how local fluctuations can influence the occurrence of earthquakes over distances comparable with the correlation length. In this work, the physical basis of spatial correlations of earthquakes is discussed in the context of critical phenomena and the percolation problem. The method of two-point correlation function is applied to the seismicity of California. Well defined variations in time of the correlation length are found for aftershock sequences and background seismicity. The scaling properties of our obtained distributions are analyzed with respect to changes in several scaling parameters such as lower magnitude cutoff of earthquakes, the maximum time interval between earthquakes, and the spatial size of the area considered. This scaling behavior can be described in a unified manner by utilizing the multifractal fit. Utilizing the percolation approach the time evolution of clusters of earthquakes is studied with the correlation length defined in terms of the radius of gyration of clusters. This method is applied to the seismicity of California.     

Effects of magnetic interactions in anisotropy of magnetic susceptibility: Models, experiments and implications for igneous rock fabrics quantification

Besides granites of the ilmenite series, in which the anisotropy of magnetic susceptibility (AMS) is mainly controlled by paramagnetic minerals, the AMS of igneous rocks is commonly interpreted as the result of the shape-preferred orientation of unequant ferromagnetic grains. In a few instances, the anisotropy due to the distribution of ferromagnetic grains, irrespective of their shape, has also been proposed as an important AMS source. Former analytical models that consider infinite geometry of identical and uniformly magnetized and coaxial particles confirm that shape fabric may be overcome by dipolar contributions if neighboring grains are close enough to each other to magnetically interact. On these bases we present and experimentally validate a two-grain macroscopic numerical model in which each grain carries its own magnetic anisotropy, volume, orientation and location in space. Compared with analytical predictions and available experiments, our results allow to list and quantify the factors that affect the effects of magnetic interactions. In particular, we discuss the effects of (i) the infinite geometry used in the analytical models, (ii) the intrinsic shape anisotropy of the grains, (iii) the relative orientation in space of the grains, and (iv) the spatial distribution of grains with a particular focus on the inter-grain distance distribution. Using documented case studies, these findings are summarized and discussed in the framework of the generalized total AMS tensor recently introduced by Cañon-Tapia (Cañon-Tapia, E., 2001. Factors affecting the relative importance of shape and distribution anisotropy in rocks: theory and experiments. Tectonophysics, 340, 117–131.). The most important result of our work is that analytical models far overestimate the role of magnetic interaction in rock fabric quantification. Considering natural rocks as an assemblage of interacting and non-interacting grains, and that the effects of interaction are reduced by (i) the finite geometry of the interacting clusters, (ii) the relative orientation between interacting grains, (iii) their heterogeneity in orientation, shape and bulk susceptibility, and (iv) their inter-distance distribution, we reconcile analytical models and experiments with real case studies that minimize the role of magnetic interaction onto the measured AMS. Limitations of our results are discussed and guidelines are provided for the use of AMS in geological interpretation of igneous rock fabrics where magnetic interactions are likely to occur.     

A Decision Support System for the Evaluation of Eco-engineering Strategies for Slope Protection

A decision support system (DSS) has been developed to assist expert and non-expert users in the evaluation and selection of eco-engineering strategies for slope protection. This DSS combines a qualitative hazard assessment of erosion and mass movements with a detailed catalogue of eco-engineering strategies for slope protection of which the suitability is evaluated in relation to the data entered. The slope decision support system (SDSS) is a knowledge based DSS in which knowledge is stored in frames containing rules that can evaluate the available information for a project, stored as project specific information (PSI) in a data file. The advantages of such a system are that it accepts incomplete information and that the qualitative nature of the information does not instil the user with a sense of unjustified exactitude. By its multidisciplinary and progressive nature, the DSS will be of value during the initial stages of an eco-engineering project when data collection and the potential of different eco-engineering strategies are considered. The accent of the output of the DSS is on the application of eco-engineering strategies for slope protection as an environmentally-friendly solution aiding sustainable development. For its acceptance within the engineering community, the DSS needs to prove its predictive capacity. Therefore, its performance has been benchmarked against successful and unsuccessful cases of slope stabilisation using eco-engineering. The target audience and the areas of application of this DSS are reviewed and the strategies for further development in this area suggested.     

T -distributed Random Fields: A Parametric Model for Heavy-tailedWell-log Data1

Histograms of observations from spatial phenomena are often found to be more heavy-tailed than Gaussian distributions, which makes the Gaussian random field model unsuited. A T-distributed random field model with heavy-tailed marginal probability density functions is defined. The model is a generalization of the familiar Student-T distribution, and it may be given a Bayesian interpretation. The increased variability appears cross-realizations, contrary to in-realizations, since all realizations are Gaussian-like with varying variance between realizations. The T-distributed random field model is analytically tractable and the conditional model is developed, which provides algorithms for conditional simulation and prediction, so-called T-kriging. The model compares favourably with most previously defined random field models. The Gaussian random field model appears as a special, limiting case of the T-distributed random field model. The model is particularly useful whenever multiple, sparsely sampled realizations of the random field are available, and is clearly favourable to the Gaussian model in this case. The properties of the T-distributed random field model is demonstrated on well log observations from the Gullfaks field in the North Sea. The predictions correspond to traditional kriging predictions, while the associated prediction variances are more representative, as they are layer specific and include uncertainty caused by using variance estimates.     

Results from a Multi-disciplinary Sedimentary Pilot Study of Tectonic Lake Iznik (NW Turkey) – Geochemistry and Paleolimnology of the Recent Past

A limnogeological reconnaissance study was carried out on Lake Iznik, located in the southeast of the Marmara region of Turkey, involving a seismic survey and collection of short sediment cores. This lake is located on the middle branch of the North Anatolian Fault Zone (NAFZ), a transform plate boundary between the Eurasian and Anatolian Plates. It is, therefore, tectonically active and offers an opportunity to investigate the interplay of sedimentary and seismo-tectonic processes, as well as climate change and human impact in the region. Short cores of the three sub-basins, maximum length of 35.5 cm, recovered non-laminated, blackish clays and silts with varying amounts of biogenic and minerogenic (allochthonous, autochthonous) material, which documented almost the last 80 years of deposition and environmental history. High sedimentation rates in the deeper core sections are accompanied by changes in land use (conversion of woodland to farmland) in the northern areas of Lake Iznik, which caused the deposition of more weathered material (high K/Na ratios) and higher contents of Mn in the lake. A tendency towards eutrophic conditions within the last 20 years is indicated by high nutrient content (N, TOC, P), decreasing C/N-ratios, and characteristic diatom and cladoceran associations. Also increased pollution is revealed by higher Pb, Cu, and Zn contents and increased supply of human and animal faeces (high coprostanol content) during the last two decades. But simultaneous lower sedimentation rates towards the core tops complicate the reconstruction of recent and past eutrophication and pollution states of Lake Iznik. This requires an extension of the pilot study and deeper sediment cores, to recover non-anthropogenic influenced sediment levels.     

韧性剪切变形对岩石地球化学行为的制约——以北阿尔金巴什考供韧性剪切带为例

韧性剪切变形对岩石地球化学行为的制约一直是地质学家们探讨的课题。本文以构成北阿尔金红柳沟——拉配泉俯冲碰撞杂岩带与北阿尔金地块边界的巴什考供斜向逆冲型韧性剪切带为例，通过对韧性剪切带内花岗岩变形前后不同变形强度构造岩的地球化学组成进行对比，确定等比线斜率，探讨韧性变形对岩石体积和成分变异的影响。计算结果表明，在糜棱岩化过程中，糜棱岩化花岗岩体积亏损21％，花岗质糜棱岩体积亏损31％。质量平衡计算结果和等比线图表明，韧；陛剪切作用导致SiO2，流失量最大，A12O3、K2O及Ba、Rb、Sr等都有不同程度的丢失，显示出较强的活动性，MnO、P2O5、Sc位于等比线上或附近，表现出相对的稳定性。岩石中活动组分的变异是流体渗滤作用引起的，不活动组分的变异是体．积亏损造成的。