Reservoir construction from the Newberry Volcano EGS Demonstration

The Newberry Volcano EGS Demonstration in central Oregon tests recent technological advances designed to reduce the cost of power generated by EGS in a hot, dry well (NWG 55-29) drilled in 2008. An EGS reservoir was created by injecting large volumes of cold water, causing existing fractures to slip in shear (known as hydroshearing) generating the seismic waves that can be used to map fracture location and size. At the Newberry Demonstration the final injectivity ranged between 1.4 and 1.7 L/s/MPa a ~6x improvement over the initial injectivity of the well. The injectivity improvement and seismic analysis indicate that previously impermeable fractures were enhanced during the NWG 55-29 stimulation.     

An investigation of the Eigenvalue Calibration Method (ECM) using GASP for non-imaging and imaging detectors

Polarised light from astronomical targets can yield a wealth of information about their source radiation mechanisms, and about the geometry of the scattered light regions. Optical observations, of both the linear and circular polarisation components, have been impeded due to non-optimised instrumentation. The need for suitable observing conditions and the availability of luminous targets are also limiting factors. The science motivation of any instrument adds constraints to its operation such as high signal-to-noise (SNR) and detector readout speeds. These factors in particular lead to a wide range of sources that have yet to be observed. The Galway Astronomical Stokes Polarimeter (GASP) has been specifically designed to make observations of these sources. GASP uses division of amplitude polarimeter (DOAP) (Compain and Drevillon Appl. Opt. 37, 5938–5944, 1998) to measure the four components of the Stokes vector (I, Q, U and V) simultaneously, which eliminates the constraints placed upon the need for moving parts during observation, and offers a real-time complete measurement of polarisation. Results from the GASP calibration are presented in this work for both a 1D detector system, and a pixel-by-pixel analysis on a 2D detector system. Following Compain et al. (Appl. Opt. 38, 3490–3502 1999) we use the Eigenvalue Calibration Method (ECM) to measure the polarimetric limitations of the instrument for each of the two systems. Consequently, the ECM is able to compensate for systematic errors introduced by the calibration optics, and it also accounts for all optical elements of the polarimeter in the output. Initial laboratory results of the ECM are presented, using APD detectors, where errors of 0.2 % and 0.1° were measured for the degree of linear polarisation (DOLP) and polarisation angle (PA) respectively. Channel-to-channel image registration is an important aspect of 2-D polarimetry. We present our calibration results of the measured Mueller matrix of each sample, used by the ECM, when 2 Andor iXon Ultra 897 detectors were loaned to the project. A set of Zenith flat-field images were recorded during an observing campaign at the Palomar 200 inch telescope in November 2012. From these we show the polarimetric errors from the spatial polarimetry indicating both the stability and absolute accuracy of GASP.     

Evidence for climatic variability and its impact on human development during the Neolithic from Loughmeenaghan,County Sligo,Ireland

High‐resolution pollen and geochemical analyses conducted on a sediment profile from a small lake in County Sligo, Ireland, revealed that human development during the Neolithic was influenced by pronounced climatic oscillations. The primeval woodland around the lake experienced a considerable transformation coinciding with the elm decline at 3810 BC. The subsequent increase in summer temperatures and decrease in precipitation favoured wheat cultivation in the lake's catchment area, which was practised for approximately 140 years. A shift towards pastoral farming took place with the establishment of exceptionally dry conditions between 3650 and 3560 BC, when lake level and influx of allochthonous material were notably low. The onset of cool and wet conditions at the transition from the Early to Middle Neolithic possibly caused the initial decline of human activity in the area. Periods of particularly high precipitation during the Middle and early Late Neolithic contributed to the abandonment of the area by the first farmers. Comparison of the proxy record from the study site with other palynological and archaeological records from Ireland suggests that climatic variability on the decadal to centennial scale represented a primary control on the nature and duration of farming practices during the Neolithic. Copyright © 2012 John Wiley & Sons, Ltd.     

Hafnium isotopic variations in East Atlantic intraplate volcanism

The broad belt of intraplate volcanism in the East Atlantic between 25° and 37° N is proposed to have formed by two adjacent hotspot tracks (the Madeira and Canary tracks) that possess systematically different isotopic signatures reflecting different mantle source compositions. To test this model, Hf isotope ratios from volcanic rocks from all individual islands and all major seamounts are presented in this study. In comparison with published Nd isotope variations (6 εNd units), ¹⁷⁶Hf/¹⁷⁷Hf ratios span a much larger range (14 εHf units). Samples from the proposed Madeira hotspot track have the most radiogenic Hf isotopic compositions (¹⁷⁶Hf/¹⁷⁷Hf_m up to 0.283335), extending across the entire field for central Atlantic MORB. They form a relatively narrow, elongated trend on the Nd vs. Hf isotope diagram (stretching over > 10 εHf units) between a depleted N-MORB-like endmember and a moderately enriched composition located on, or slightly below, the Nd–Hf mantle array, which overlaps the proposed “C” mantle component of Hanan and Graham (1996). In contrast, all samples from the Canary hotspot track plot below the mantle array (¹⁷⁶Hf/¹⁷⁷Hf_m = 0.282943–0.283067) and form a much denser cluster with less compositional variation (~4 εHf units). The cluster falls between (1) a low Hf isotope HIMU-like endmember, (2) a more depleted composition, and (3) the moderately enriched end of the Madeira trend. The new Hf isotope data confirm the general geochemical distinction of the Canary and Madeira domains in the East Atlantic. Both domains, however, seem to share a common, moderately enriched endmember that has “C”-like isotope compositions and is believed to represent subducted, <1-Ga-old oceanic lithosphere (oceanic crust and possibly minor sediment addition). The lower ¹⁷⁶Hf/¹⁷⁷Hf ratio of the enriched, HIMU-like Canary domain endmember indicates the contribution of oceanic lithosphere with somewhat older recycling ages of ≥1 Ga.     

Defect properties of albite

Knowledge of the defect properties of Lunar and Mercurian minerals has recently become important, with the advent of models which attempt to explain the formation of the thin exosphere of these celestial bodies. Here, we have calculated the formation energies of sodium and oxygen vacancies in the mineral albite (NaAlSi₃O₈), as well as the Schottky defect energy for the removal of a Na₂O unit. We have employed both the supercell and Mott–Littleton approaches, using Kohn–Sham density functional theory and classical interatomic potential methods. As well as reporting the defect energies and structures, we comment upon the relative merits of the methods used.     

Anthropogenic relief changes in a long-lasting lignite mining area (‘Ville’, Germany) derived from historic maps and digital elevation models

Humans constitute one of the main geomorphological agents in modern times. As an example, post-mining regions represent a typical landscape of the Anthropocene. Strong relief modifications are particularly obvious with open pit mining. However, many existing mining areas are lacking detailed pre-mining information for the quantification of anthropogenic relief changes, which is a considerable challenge in regions with historic mining activities. Here, the Ville (Rhenish lignite district, Germany) is used to quantify surface mining induced relief changes in one of the oldest and currently largest lignite districts in Europe. Historical maps from first geodetic mapping in 1893 enabled construction of a historic digital elevation model to quantify the relief changes in comparison to elevation data from 2000 and 2015. The vertical accuracy of the historic data is remarkably high, with relief differences < 2 m in areas not affected by mining. In total, 49.2% of the investigated area (184 km²) shows a relief deficit and 14.5% has positive relief differences. Absolute changes account for more than 80 m heightening (dumpsites of overburden) and lowering of the natural relief (pits). Besides these altitudinal changes, overall steeper slopes are significant for the new topography, but levelling exists likewise. The spatial variabilities are discussed in the context of the regional geology and the mining techniques. Undoubtedly, such large-scale anthropogenic relief changes persist for a very long time and will last as a human legacy far into the future. Only the detailed reconstruction of the pre-mining relief offers the ability to clarify the dimension of humans as geomorphological agents and to understand landscape perception. Due to the fact that the impact of open pit mining has such a large vertical and horizontal extension, their consideration as part of anthropogeomorphology can significantly contribute to support future Critical Zone research in the Anthropocene.     

MODFLOW-Style parameters in underdetermined parameter estimation

In this article, we discuss the use of MODFLOW-Style parameters in the numerical codes MODFLOW_2005 and MODFLOW_2005-Adjoint for the definition of variables in the Layer Property Flow package. Parameters are a useful tool to represent aquifer properties in both codes and are the only option available in the adjoint version. Moreover, for overdetermined parameter estimation problems, the parameter approach for model input can make data input easier. We found that if each estimable parameter is defined by one parameter, the codes require a large computational effort and substantial gains in efficiency are achieved by removing logical comparison of character strings that represent the names and types of the parameters. An alternative formulation already available in the current implementation of the code can also alleviate the efficiency degradation due to character comparisons in the special case of distributed parameters defined through multiplication matrices. The authors also hope that lessons learned in analyzing the performance of the MODFLOW family codes will be enlightening to developers of other Fortran implementations of numerical codes.