大巴山西段高川地体构造变形特征及其意义

勉略缝合带华北与华南大陆于印支期完成拼合的主要拼接带,在中国大陆的形成与演化中占据重要地位。但是,勉略带的东、西延伸,至今没有确定的结论,尤其陕西省勉县以东到湖北随州一带,还没有找到确凿的缝合带的证据。现今一些重要的文章多认为勉略带在勉县以东到达宁陕县两河口之后向南转折,沿着高川岩片的位置顺大巴山弧形构造带向东延伸到湖北随州一带。然而,本文的研究表明,高川岩片是一个独立于大巴山构造带的外来地质体,并称之为高川地体。高川地体是一个由近南北向右行走滑断层与轴向近南北向的走滑剪切褶皱构造组成的右行走滑构造系统,作者认为,它是大巴山冲断推覆构造向南推覆过程中,被从原勉略缝合带中挤过来的一片,它仅仅是被挟持在大巴山冲断—推覆构造带与大巴山前陆构造带之间的地壳浅层地质体,高川地体现在的位置不能代表勉略带向东的延伸。因此,大巴山弧形构造带也不是中国南北大陆最终碰撞拼贴的位置     

基于贡献权重迭加法的滑坡风险区划

贡献权重迭加法是对滑坡本底因子和承灾体因子在滑坡发育中的贡献率进行统计后,通过贡献率均值化、规一化处理,利用权重转换模型计算出每一个因子内部的权重——自权重W和因子相互之间的权重——互权重W＇。将滑坡因子、承灾体因子和两者的自权重、互权重分别相乘迭加,得到滑坡危险度和易损度区划结果,再将2项结果相乘得出滑坡风险区划。     

煤层气固井声幅测井方法探讨

影响煤层气固井声幅测井的因素较多,如地层软硬变化大、套管内径或壁厚不均、仪器不居中、发射能量不足、接收灵敏度不够等,这些因素的存在将会导致首波丢失、时差曲线产生周波跳跃或波动现象。为提高煤层气固井声幅测井质量,要尽量保证所用仪器外径接近套管内径,以减少无效传播和能量损失,另外需提高仪器的发射能量及接收灵敏度;在自由套管和声波强吸收地层,必须保证自由套管首波不限幅、声波强吸收地层首波不丢失。在现场解释时,一般以＂自由套管＂处的偏转幅度值A为标准,将固井声幅曲线幅度的20%A和40%A作为分界点,评价固井效果。     

黄河下游断面形态与水沙输移关系及数学模拟方法

以前人对黄河下游的实测资料分析为基础,本文讨论断面形态与来水来沙关系、断面形态对输水输沙的影响,并根据实测资料,提出黄河下游弯段与直段断面冲淤变化的两种模式,建立了主流摆动及坍岸影响断面形态变化以及纵向冲淤量在断面的分布两种数学模拟方法。     

稀土矿床：基本特点与全球分布规律

本文介绍了全球稀土资源供需历史、现状和对未来的展望。从矿床成因视角切入，将稀土矿床分为内生和外生两大类型，其中内生稀土矿床包括碳酸岩型、碱性岩型、碱性岩型- 碳酸岩型、氧化铁铜金型、热液脉型，外生稀土矿床包括风化壳离子吸附型、沉积岩型、沉积矿产(煤矿、铝土矿和沉积磷矿)伴生型、砂矿和现代海洋底部含稀土的锰结核、结壳和软泥型。归纳总结了主要类型矿床的基本特点和时空分布；认为内生稀土矿床产出于四类构造环境，包括裂谷环境、碰撞后伸展环境、大陆碰撞环境和后俯冲伸展环境；从构造演化入手，探讨了在外生与内生地质过程中稀土元素的迁移和富集规律，建立了涵盖主要矿床类型的构造- 成矿模型。     

Equation of state of MgGeO3 perovskite to 65 GPa: comparison with the post-perovskite phase

The equation of state of MgGeO₃ perovskite was determined between 25 and 66 GPa using synchrotron X-ray diffraction with the laser-heated diamond anvil cell. The data were fit to a third-order Birch–Murnaghan equation of state and yielded a zero-pressure volume (V ₀) of 182.2 ± 0.3 Å³ and bulk modulus (K ₀) of 229 ± 3 GPa, with the pressure derivative (K′₀ = (?K ₀/?P) _T ) fixed at 3.7. Differential stresses were evaluated using lattice strain theory and found to be typically less than about 1.5 GPa. Theoretical calculations were also carried out using density functional theory from 0 to 205 GPa. The equation of state parameters from theory (V ₀ = 180.2 Å³, K ₀ = 221.3 GPa, and K′₀ = 3.90) are in agreement with experiment, although theoretically calculated volumes are systematically lower than experiment. The properties of the perovskite phase were compared to MgGeO₃ post-perovskite phase near the observed phase transition pressure (～65 GPa). Across the transition, the density increased by 2.0(0.7)%. This is in excellent agreement with the theoretically determined density change of 1.9%; however both values are larger than those for the (Mg,Fe)SiO₃ phase transition. The bulk sound velocity change across the transition is small and is likely to be negative [?0.5(1.6)% from experiment and ?1.2% from theory]. These results are similar to previous findings for the (Mg,Fe)SiO₃ system. A linearized Birch–Murnaghan equation of state fit to each axis yielded zero-pressure compressibilities of 0.0022, 0.0009, and 0.0016 GPa^?1 for the a, b, and c axis, respectively. Magnesium germanate appears to be a good analog system for studying the properties of the perovskite and post-perovskite phases in silicates.     

Influence of sedimentary environments on mechanical properties of clastic rocks

The sedimentary environments are the intrinsic factor controlling the mechanical properties of clastic rocks. Examining the relationship between rock sedimentary environments and rock mechanical properties gives a better understanding of rock deformation and failure mechanisms. In this study, more than 55 samples in coal measures were taken from seven different lithologic formations in eastern China. Using the optical microscope the sedimentary characteristics, such as components of clastic rocks and sizes of clastic grains were quantitatively tested and analyzed. The corresponding mechanical parameters were tested using the servo-controlled testing system. Different lithologic attributes in the sedimentary rocks sampled different stress–strain behaviors and failure characteristics under different confining pressures, mainly due to different compositions and textures. Results demonstrate that clastic rocks have the linear best-fit for Mohr-Coulomb failure criterion. The elastic moduli in clastic rocks are highly dependent upon confining pressures, unlike hard rocks. The envelope lines of the mechanical properties versus the contents of quartz, detritus of the grain diameter of more than 0.03 mm, and grain size in clastic rocks are given. The compressive strength or elastic modulus and the grain diameter have a non-monotonic relation and demonstrate the “grain-diameter softening” effect.     

在“国土资源信息化建设成果展览”剪彩仪式上的讲话

各位来宾,各位代表,同志们:国土资源信息化建设成果展览,今天在美丽的昆明市隆重开幕了。我谨代表国土资源部,对展览的成功举办表示热烈的祝贺!向参与这次展览的各界代表和朋友们表示诚挚的问候!向各位来宾和同志们表示衷心的感谢!     

中国MODIS卫星影像彩色镶嵌图制作

本文介绍了大范围卫星影像彩色镶嵌图的制作流程．对于大范围卫星影像彩色镶嵌图制作的技术难点（去云、拼接、调色），文章进行了重点介绍并提出技术解决办法．利用MODIS卫星数据制作了两幅全国彩色影像镶嵌图：一幅为红波段（B1）、绿波段（B4）和蓝波段（B3）构成的真彩色合成影像：一幅为红波段（B1）．近红外波段（B2）和蓝波段（B3）构成的假彩色合成影像．两幅影像色彩精美，信息量丰富．     

黄骅坳陷扣村地区古近系沙三段高分辨层序地层分析

通过利用钻井、测井、地震等多种资料，以黄骅坳陷扣村地区古近系沙三段为例，详细论述了开展高分辨层序地层分析的研究流程、方法．在四级层序格架确定的基础上，叙述了以一般湖泛面和更小级别的岩性和结构层序单元界面的识别与类型的确定．指出通过露头、岩心、测井曲线和高分辨地震信息，可以确定短期旋回界面与超短期旋回界面．根据工区的特点选取主干剖面，建立高分辨率层序地层网络格架对比剖面，开展长、中、短期基准面旋回的分析、高分辨率层序地层的单砂体展布分析及其沉积微相研究．