Quick sulfide buffering in inner shelf sediments of the East China Sea impacted by eutrophication

In the eutrophic coastal ocean, quick formation of iron (Fe) sulfide is environmentally important to effectively prevent accumulation of dissolved sulfide and its detrimental effects on the benthic ecosystem. In this study, 0.5 N HCl-extractable labile Fe (LFe), acid volatile sulfide, and pyrite in the East China Sea inner shelf sediments were examined to investigate the mechanisms of quick sequestration of dissolved sulfide and potential impacts of frequent algal blooms on the capacity of quick sulfide-buffering in eutrophic coastal areas of the large-sized continental shelf subject to massive terrestrial input. The results indicate that sulfate reduction has been competitively suppressed by dissimilatory Fe reduction due to limited availability of labile organic matter. Dissolved sulfide can be quickly buffered by reaction with LFe and, therefore, is difficult to accumulate to a high level. The quick sulfide-buffering capacity has not become exhausted partly because of the formation of un-sulfidized LFe(II) via dissimilatory reduction of less reactive Fe oxides. It is expected that dissolved sulfide will not pose detrimental effects on the benthic ecosystem in the near future if the current biogeochemical/ecological state remains.     

Determination of perchlorate and iodide concentrations in edible seaweeds

Perchlorate and iodide concentrations were determined in brown (Undaria pinnatifida and Laminaria japonica) and red (Porphyra sp.) edible seaweeds, which are commonly consumed by Korean people, with the use of ion chromatography, coupled with a tandem mass spectrometer. Seaweeds (i.e., good sources of iodine) are among the most important plant life in the ocean and commonly consumed as food and nutritional supplement in South Korea. All seaweed samples were purchased from different regions in South Korea. The detected concentrations of perchlorate were as follows: 19.7–620.7 μg kg^?1 dry weight (n = 11, mean concentration = 149.2 μg kg^?1 dry weight) for L. japonica and 7.3–21.7 μg kg^?1 dry weight (mean concentration = 10.6 μg kg^?1 dry weight) for U. pinnatifida. Of the 11 samples of Porphyra sp., only 1 sample showed 6.7 μg kg^?1 dry weight perchlorate. The concentrations of iodide in all seaweed samples varied from 0.44 to 6,800 mg kg^?1 dry weight. L. japonica samples (n = 11) had significantly higher iodide concentrations, with a mean of 5,261 mg kg^?1 dry weight. The bioconcentration factor values for perchlorate and iodide in the three different seaweeds varied widely and showed similar variation trends. The trend for perchlorate and iodide was Porphyra sp. < U. pinnatifida < L. japonica. The results have provided growing evidence that perchlorate frequently occurs in food products.     

Evaluation of adsorption potential of bamboo biochar for metal-complex dye: equilibrium,kinetics and artificial neural network modeling

Metal-complex dyes are widely used in textile industry, but harmful to the environment and human health due to aromatic structure and heavy metal ions. The objective of this work was to evaluate the adsorption potential of bamboo biochar for the removal of metal-complex dye acid black 172 from solutions. Freundlich model was more suitable for the adsorption process of bamboo biochar than Langmuir isotherm, indicating multilayer adsorption of acid black 172 on a heterogeneous bamboo biochar surface. Adsorption kinetics analysis of pseudo-second-order and Weber–Morris models revealed that intraparticle transport was not the only rate-limiting step. The bamboo biochar exhibited a good adsorption performance even at high ionic strength. Analysis based on the artificial neural network indicated that the temperature with a relative importance of 29 % appeared to be the most influential parameter in the adsorption process for dye removal, followed by time, ionic strength, pH and dye concentration.     

Paragenesis and geochemistry of ore minerals in the epizonal gold deposits of the Yangshan gold belt,West Qinling,China

Six epizonal gold deposits in the 30-km-long Yangshan gold belt, Gansu Province are estimated to contain more than 300 t of gold at an average grade of 4.76 g/t and thus define one of China's largest gold resources. Detailed paragenetic studies have recognized five stages of sulfide mineral precipitation in the deposits of the belt. Syngenetic/diagenetic pyrite (Py₀) has a framboidal or colloform texture and is disseminated in the metasedimentary host rocks. Early hydrothermal pyrite (Py₁) in quartz veins is disseminated in metasedimentary rocks and dikes and also occurs as semi-massive pyrite aggregates or bedding-parallel pyrite bands in phyllite. The main ore stage pyrite (Py₂) commonly overgrows Py₁ and is typically associated with main ore stage arsenopyrite (Apy₂). Late ore stage pyrite (Py₃), arsenopyrite (Apy₃), and stibnite occur in quartz ± calcite veins or are disseminated in country rocks. Post-ore stage pyrite (Py₄) occurs in quartz ± calcite veins that cut all earlier formed mineralization. Electron probe microanalyses and laser ablation-inductively coupled plasma mass spectrometry analyses reveal that different generations of sulfides have characteristic of major and trace element patterns, which can be used as a proxy for the distinct hydrothermal events. Syngenetic/diagenetic pyrite has high concentrations of As, Au, Bi, Co, Cu, Mn, Ni, Pb, Sb, and Zn. The Py₀ also retains a sedimentary Co/Ni ratio, which is distinct from hydrothermal ore-related pyrite. Early hydrothermal Py₁ has high contents of Ag, As, Au, Bi, Cu, Fe, Sb, and V, and it reflects elevated levels of these elements in the earliest mineralizing metamorphic fluids. The main ore stage Py₂ has a very high content of As (median value of 2.96 wt%) and Au (median value of 47.5 ppm) and slightly elevated Cu, but relatively low values for other trace elements. Arsenic in the main ore stage Py₂ occurs in solid solution. Late ore stage Py₃, formed coevally with stibnite, contains relatively high As (median value of 1.44 wt%), Au, Fe, Mn, Mo, Sb, and Zn and low Bi, Co, Ni, and Pb. The main ore stage Apy₂, compared to late ore stage arsenopyrite, is relatively enriched in As, whereas the later Apy₃ has high concentrations of S, Fe, and Sb, which is consistent with element patterns in associated main and late ore stage pyrite generations. Compared with pyrite from other stages, the post-ore stage Py₄ has relatively low concentrations of Fe and S, whereas As remains elevated (2.05～3.20 wt%), which could be interpreted by the substitution of As^? for S in the pyrite structure. These results suggest that syngenetic/diagenetic pyrite is the main metal source for the Yangshan gold deposits where such pyrite was metamorphosed at depth below presently exposed levels. The ore-forming elements were concentrated into the hydrothermal fluids during metamorphic devolatilization, and subsequently, during extensive fluid–rock interaction at shallower levels, these elements were precipitated via widespread sulfidation during the main ore stage.     

Uncertainty assessment in quantitative rockfall risk assessment

This study shows a quantitative rockfall risk assessment (QRA) for a slope of the Feifeng Mountain (China), including an explicit assessment of the uncertainties. For rockfall risk analysis, the annual probability of occurrence, reach probability, temporal–spatial probability and vulnerability of tourists were calculated for both dry and rainy day conditions. The resulting individual risk for exposed people visiting the historical site can be considered as acceptable for all scenarios, whereas the overall societal risk lies within the as low as reasonably practicable (ALARP) zone and therefore requires some mitigation actions. For the explicit assessment of uncertainty, an error propagation technique (first-order second moment (FOSM)) was adopted, starting from expert knowledge heuristic estimations of the coefficient of variation for each component of the risk analysis procedure. As a result, coefficients of variation of the calculated risk were obtained, ranging from 48 to 132 %, thus demonstrating the importance of accounting for uncertainty in rockfall risk modelling. A multi-criteria methodology is also proposed for the assessment of the standard deviation of the parameters adopted for the stochastic rockfall run-out model.     

Occurrence modes and cleaning potential of sulfur and some trace elements in a high-sulfur coal from Pu’an coalfield,SW Guizhou,China

In this research, a float-sink test was applied to a Late Permian high-sulfur coal collected from Pu’an coalfield, Southwest in Guizhou, China. To investigate the occurrence modes and the mobility of various trace elements, as well as the cleaning potential of some harmful elements in density separation, coal quality parameters and concentrations of 46 elements of 7 density fractionated samples were determined and statistically analyzed. Results show that larger size and higher density fractions have higher total sulfur content and ash yield than the smaller and lower ones. In fact, most (74.39 %) of the total sulfur occurs in the inorganic matter. Affinity and correlation analysis show that Mo and Ni have apparently strong organic affinity, whereas Rh, Cs, Sr, Co, Nb, Zr, V, Ga, Sc, Be, Ge, Hf, Th, U, Ag, As, In, Cu, Cd, Ta, Li, TI, and Ba are mostly in the heavy fractions. Rare earth element (REE) patterns for the seven density fractions present good uniformity and show that they are of right-inclined pattern type characterized by Light REE (LREE, La ~ Eu) enrichment relative to Heavy REE (HREE, Gd ~ Lu) and pronounced negative δ _Eu anomalies. This suggests that REE was mainly derived from basalt-weathered materials. LRREE/HREE ratio variations reveal that LREE has stronger affinity with the organic matter relative to the HREE, while high LRREE/HREE in heavy fractions may be related to pyrite. Supposing the maximum sulfur content of the cleaned coal is 1.00 %, the theoretical removal ratios of Co, TI, and Ba are as high as 90.94, 93.73, and 92.29 %, respectively, while those of As, Ni and Mo are only 56.33, 48.85, and 45.05 %, respectively. As these figures change with different maximum sulfur contents required for the cleaned coal, not only the decrease of sulfur and ash in coal washing, but also the mobility of some harmful trace elements should be taken into consideration.     

西安市地裂缝对长安路立交桥致灾机理调查研究

西安地裂缝作为一种特殊的城市地质灾害,已经对基础设施造成很大的危害。长安路立交的破坏最为严重和典型,文章结合西安地裂缝的分布及活动特点,详细分析了地裂缝活动引起的长安路立交的破坏形式和特点。并对引起长安路立交破坏的原因做了进一步分析,得出了由于长安立交没有很好的排水措施导致地裂缝的异常活动从而引起桥梁破坏的结论。同时,文章还结合长安路立交的结构措施给出了在地裂缝带修建立交的结构措施建议。并最终得出了在地裂缝带修建城市立交等基础设施,应从采取措施减少地裂缝活动和采取合理的结构措施以适应地裂缝活动两方面进行综合考虑的结论。     

Internal Microanatomy and Zoological Affinity of the Early Cambrian Olivooides

The early Cambrian pentamerous microfossil Olivooides/Punctatus in South China, which is characterized by a diagnostic stellate tubular apex, has been well-known for its almost complete development sequence that can be confidently traced from embryos and hatched juveniles, to conical adults. However, its zoological affinity remains highly controversial. Here we describe the internal microanatomic structures of the soft-body inside the peridermal theca of Olivooides multisulcatus Qian, 1977, including interradial pairs of tentacles, adradial and perradial frenula, perradial oral marginal lappets and twins of perradial gastric saccule-like humps as well as a circular velarium with striated coronal muscles. Particularly, one specimen shows bifurcated velarial canals along the bell aperture. Both the components of the soft-body and the external theca (or cyst) are arranged in perfect pentaradial symmetry. These characteristics are more compatible with those of living cubomedusans and co-occurring Cambrian athecate embryonic cubozoans. Concerning the presence of peridermal theca, Olivooides most likely represents an extinct thecate stem-group cubomedusae but devoid of both perradial eyes and specialized pedalia. The well-grown soft body inside the peridermal tube displays a set of mixed features of both polyp and medusa.