Polygonal grain‐based distinct element modeling for mechanical behavior of brittle rock

The microstructure of rock was numerically reproduced by a polygonal grain‐based model, and its mechanical behavior was examined by performing the uniaxial compression test and Brazilian tests via the Universal Distinct Element Code. The numerical results of the model demonstrated good agreement with the experimental results obtained with rock specimens in terms of the stress–strain behavior, strength characteristics, and brittle fracture phenomenon. An encouraging result is that the grain‐based model‐Universal Distinct Element Code model can reproduce a low ratio of tensile to compressive strength of 1/20 to 1/10 without the need for an additional process. This finding is ascribed to the fact that the geometrical features of polygons can effectively capture the effects of angularity, finite rotation, and interlocking of grains that exist in reality. A numerical methodology to monitor the evolution of micro‐cracks was developed, which enabled us to examine the progressive process of the failure and distinguish the contribution of tensile cracking to the process from that of shear cracking. From the observations of the micro‐cracking process in reference to the stress–strain relation, crack initiation stress, and crack damage stress, it can be concluded that the failure process of the model closely resembles the microscopic observations of rock. We also carried out a parametric study to examine the relationships between the microscopic properties and the macroscopic behavior of the model. Depending on the micro‐properties, the model exhibited a variety of responses to the external load in terms of the strength and deformation characteristics, the evolution of micro‐cracks, and the post‐peak behavior. Copyright © 2016 John Wiley & Sons, Ltd.     

Development of Prebored Screw Pile Method and Evaluation of Its Bearing Characteristics

The pile-driving method produces considerable noise and vibrations. Hence, an auger-drilled pile method was developed as a low-noise and -vibration substitute. However, this method does not guarantee the bearing capacity of the pile unless some amount of pile-driving is performed. Therefore, the noise and vibration problems cannot be completely solved. In this study, a prebored screw pile method is proposed to solve these problems. In this method, piles are constructed by the rotary penetration of a screw pile into a prebored hole filled with some cement milk and whose diameter is smaller than that of the screw pile. To determine the shape of the screw pile, laboratory tests with model screw piles were conducted. Also, field load tests were conducted on an actual screw pile fabricated based on the laboratory test result and on a smooth-surfaced pile. In addition, the behavior of the screw pile was estimated by using three-dimensional finite element analysis. The results of the field load test and the numerical simulation showed that the ultimate bearing capacity and the unit skin friction of the screw pile are very superior to those of the smooth-surfaced pile and the cement milk is an important factor in the prebored screw pile method.     

Effect of twine thickness on size-selectivity of driftnet for the yellow croaker <Emphasis Type="Italic">Larimichthys polyactis</Emphasis> in southwestern Sea of Korea

In order to determine the effect of twine thickness on the size-selectivity of the driftnet used for the yellow croaker, size-selectivity tests were conducted with three different twine thicknesses (monofilament diameters of 0.279 mm (number’s method; No. 3), 0.321 mm (No. 4), and 0.360 mm (No. 5)) of driftnets for the yellow croaker in the seas around Chooja-do, Jeju Islands. The selectivity curve was estimated by using Kitahara’s method. In order to determine the physical properties of the twine used in the experimental fishing nets, we measured the breaking load, elongation, and stiffness under both dry and wet conditions. In terms of physical properties, the thinnest twine (No. 3) had the strongest breaking strength per unit cross-sectional area, along with good elongation and excellent flexibility. The thickest twine (No. 5) had the lowest flexibility. In terms of selectivity, the net of No. 3 twine showed the broadest selection range and, thus, a relatively low selectivity compared with the other nets, while the less flexible net of No. 5 twine showed the narrowest selectivity range and high selectivity. In addition, it was found that a thicker twine resulted in a smaller haul of small fish. Therefore, it can be inferred that the thickness of the twine affects the size of the catch and selectivity, and thus the size composition of the catch as well.     

Changes in Fish Assemblages after Dike Construction in the Saemangeum Area

In the Saemangeum area, construction of a dike began in 1991 and was completed in 2006; desalination is currently being conducted. In order to investigate