Lateral force distributions for the linear static analysis of base-isolated buildings

This paper presents a new approach for the evaluation of accurate lateral force distributions for the Linear Static Analysis (LSA) of Base Isolated (BI-) buildings. In essence, the proposed lateral force distributions depend on a factor measuring the degree of non- linearity of the Isolation System (IS) and on the ratio between the effective period of the BI-structure (T_is) and the fundamental period of the Fixed Based (FB-) structure (T_fb). The proposed approach is fully compatible with the Direct Displacement-Based Design (DDBD) method, recently developed by Priestley and co-workers. The proposed lateral force distributions have been derived from the results of a large number of Nonlinear Time-History Analyses (NTHA), carried out on six numerical models of multi-storey buildings, differing in storey number (3, 5 and 8, respectively) and fundamental period of vibration (from 0.25 to 0.8 s) in the fixed-base configuration. A great variety of Isolation Systems (ISs), characterised by either Elasto-Plastic with Hardening (EPH) or Flag-Shaped (FS) force-displacement behaviour, have been considered in the NTHA. The numerical parameters of the IS models have been varied in such a way as to reproduce the actual mechanical behaviour of the main currently used ISs, including: (i) Lead Rubber Bearings (LRB), (ii) High-Damping Rubber Bearings (HDRB), (iii) Friction Pendulum Bearings (FPB), (iv) combinations of flat Sliding Bearings (SB) and Low-Damping Rubber Bearings (LDRB) and (v) Combinations of flat SB and re-centring devices based on Shape Memory Alloys (SMA). Comparisons between the storey shear forces derived with the proposed method and those obtained from NTHA clearly show the great improvements in the accuracy of LSA predictions, when using the proposed lateral force distributions.     

Analysis of Ground Deformation Detected Using the SBAS-DInSAR Technique in Umbria, Central Italy

Ground deformation affecting the Umbria region (central Italy) in the 9-year period from 1992 to 2000 was investigated through multi-temporal Differential Synthetic Aperture Radar Interferometry (DInSAR). For the purpose, the Small BAseline Subset (SBAS) technique was adopted, which allows studying the temporal evolution of the detected deformation at two spatial scales: a low-resolution (regional) scale, and a full-resolution (local) scale. For the analysis, SAR data acquired by the European Remote Sensing (ERS-1/2) satellites along ascending and descending orbits were used. The detected deformation was analysed to investigate its relevance to geophysical, geomorphologic, and human-induced processes that may result in hazardous conditions to the population of Umbria. Low-resolution deformation data were used to: (i) determine the amount of displacement caused by the Umbria-Marche earthquake sequence from September 1997 to April 1998 in the Foligno area, (ii) determine the number and percentage of the known landslides that can be monitored by the DInSAR technology in the investigated area, and (iii) identify and measure subsidence induced by exploitation of a confined aquifer in the Valle Umbra. Results indicate that earthquakes moved through the Foligno area westwards up to 3.9 cm and with an uplift reaching 1.7 cm. Intersection in a GIS of the low-resolution deformation maps with a detailed landslide inventory map allowed the determination that the portion of landslides that can be monitored by the SBAS-DInSAR technique in Umbria ranges from 2.7% to 3.4%, and the percentage of the total landslide area ranges from 10.4% to 12.8%. In the Valle Umbra, a dependency was found between the time and the amount of detected ground deformation, and the record of water withdrawal. The full-resolution deformation data were used to investigate the movement of the Ivancich landslide, in the Assisi Municipality. Joint analysis of the spatial and the temporal characteristics of the ground displacement allowed the formulation of a hypothesis on the landslide geometry and deformation pattern.     

Recycling and “re-hydration” of degassed magma inducing transient dissolution/crystallization events at Stromboli (Italy)

Intrusive degassing and recycling of degassed and dense magma at depth have been proposed for a long time at Stromboli. The brief explosive event that occurred at the summit craters on 9 January 2005 threw out bombs and lapilli that could be good candidates to illustrate recycling of shallow degassed magma at depth. We present an extensive data set on both the textures and the mineral, bulk rock and glassy matrix chemistry of the “9 Jan” products. The latter have the common shoshonitic–basaltic bulk composition of lavas and scoriae issued from typical strombolian activity. In contrast they differ by the heterogeneous chemistry of their matrix glasses and their crystal textures that testify to crystal dissolution event(s) just prior magma crystallization upon ascent and eruption. Comparison between mineral paragenesis of the natural products and experimental phase equilibria suggest water-induced magma re-equilibration. We propose that mineral dissolution is related to water enrichment of the recycled degassed magma, via differential gas bubble transfer and to some extents its physical mixing with volatile-rich magma blobs. However, all these features illustrate transient processes. Even though evidence of mineral dissolution is ubiquitous at Stromboli, its effect on the bulk magma chemistry is minor because of the subtle interplay between mineral dissolution and crystallization in magmas having comparable bulk chemistry.     

Conditional risk based on multivariate hazard scenarios

We present a novel methodology to compute conditional risk measures when the conditioning event depends on a number of random variables. Specifically, given a random vector \((\mathbf {X},Y)\), we consider risk measures that express the risk of Y given that \(\mathbf {X}\) assumes values in an extreme multidimensional region. In particular, the considered risky regions are related to the AND, OR, Kendall and Survival Kendall hazard scenarios that are commonly used in environmental literature. Several closed formulas are considered (especially in the AND and OR scenarios). An application to spatial risk analysis involving real data is discussed.     

Enhancing imaging of the Sub-Andean Foothills geology using magnetotellurics: A case history of a 3D survey in southern Bolivia

A magnetotelluric acquisition and modelling campaign, comprising 400 full tensor soundings, was carried out in the Sub-Andean Foothills in the area located south of Santa Cruz de la Sierra, Bolivia. The objective of the survey was to improve the imaging of the Paleozoic section and provide insight to the overall structure of the Devonian Silurian complex. The acquired data were inverted assuming both two-dimensional and three-dimensional dimensionality of the subsurface structure, adopting a multi-step iterative workflow, which began applying unconstrained inversion and introduced increasing constraints determined at each following step based on the interpretation of the latest inversion results. The geological interpretation of the final inversion results allowed to better image the expected complexity in the structures, particularly highlighting several different levels of detachment, mainly in the area of Kirusillas Formation. Furthermore, an oblique sense was identified of the main tendency of N-S deformation, related to a dextral transgressional movement that generates discrete dislocations, at a length scale of the order of a few kilometres.     

Numerical modeling of space-time wave extremes using WAVEWATCH III

A novel implementation of parameters estimating the space-time wave extremes within the spectral wave model WAVEWATCH III (WW3) is presented. The new output parameters, available in WW3 version 5.16, rely on the theoretical model of Fedele (J Phys Oceanogr 42(9):1601-1615, 2012) extended by Benetazzo et al. (J Phys Oceanogr 45(9):2261–2275, 2015) to estimate the maximum second-order nonlinear crest height over a given space-time region. In order to assess the wave height associated to the maximum crest height and the maximum wave height (generally different in a broad-band stormy sea state), the linear quasi-determinism theory of Boccotti (2000) is considered. The new WW3 implementation is tested by simulating sea states and space-time extremes over the Mediterranean Sea (forced by the wind fields produced by the COSMO-ME atmospheric model). Model simulations are compared to space-time wave maxima observed on March 10th, 2014, in the northern Adriatic Sea (Italy), by a stereo camera system installed on-board the “Acqua Alta” oceanographic tower. Results show that modeled space-time extremes are in general agreement with observations. Differences are mostly ascribed to the accuracy of the wind forcing and, to a lesser extent, to the approximations introduced in the space-time extremes parameterizations. Model estimates are expected to be even more accurate over areas larger than the mean wavelength (for instance, the model grid size).     

Realistic modelling of shelf-estuary regions

A very high-resolution modelling configuration was created for the estuary of Baía de Todos os Santos – BTS, Brazil (300 to 400 m), and adjacent coastal waters (600 to 1200 m). The adoption of a multi-corner domain approach allowed the variable spatial resolution required to resolve the shelf, the bay and their interactions. Seven years were simulated using realistic oceanic, atmospheric and riverine forcing. Model validation was done against observations showing the model skill to reproduce the thermohaline field, the tidal currents, as well as the variability of the free surface at tidal and sub-tidal time scales. The results provide the first representation of the tidal wave propagation along the bay, in terms of maps of amplitudes, phases and ellipses of the barotropic currents for the main tidal constituents. By analysing the residual currents at different depths, in terms of averages over the simulation period, several prominent structures were identified and named: (i) Salvador eddy (up to 0.2 m s⁻¹); (ii) St Antonio current (up to 0.45 m s⁻¹); (iii) Salvador current (up to 0.5 m s⁻¹); (iv) Itaparica eddy (up to 0.2 m s⁻¹); (v) Ilha dos Frades southern eddy (up to 0.1 m s⁻¹); and (vi) Ilha dos Frades northern eddy (up to 0.2 m s⁻¹). The model set-up proved to be highly efficient and robust simulating the BTS shelf-estuary region and such an approach may be suitable to other estuarine systems.

     

Forest,Agriculture, and Environmental Protection as Path to Sustainable Development

Natural Resources Research -     

Ultrasound assisted extraction and determination of the carbohydrate fraction in marine sediments

In this paper, an ultrasound–acetic acid procedure for the simultaneous extraction and hydrolysis of carbohydrates in marine sediments prior to their colorimetric determination is described. The main advantage of the proposed procedure is the improved analytical accuracy achieved. Extraction and hydrolysis are quantitative since the oxidative reactions which cause the underestimation of the total carbohydrate amount are minimized. Moreover the procedure is fast, requiring only 5 h for the whole analysis (extraction, hydrolysis and colorimetric determination by the phenol-sulphuric acid method). The proposed procedure has recoveries generally higher than 80% and gives comparable results with the conventional 24 h HCl extraction.