Considerations on the European Standard EN 14157 Test Methods: Abrasion Resistance of Natural Stones Used for Flooring in Buildings

In Europe, the Wide Wheel abrasion (WWA) test and the B?hme abrasion (BA) test are among the most widely used standard test methods for determining abrasion resistance of natural stones, the former being the reference test method in EN 14157 Standard. However, it is stated in the Annex-A (Informative) of EN 14157 Standard that very limited data are available to provide correlations between these two test methods. To be able to fill this gap, in this study, 25 different natural stones belonging to sedimentary, metamorphic and igneous groups were tested for their abrasion resistance as well as physico-mechanical properties. Also, for a better interpretation of abrasion resistance characteristics of the tested stone materials, relationships between abrasion resistance and physico-mechanical properties were statistically examined. A statistically significant linear correlation (R ² = 0.85; P value = 0.000) was established between the WWA test and the BA test, which could be used in practice for converting the measured abrasion resistance values from one testing method to another. It was also found that the correlation between these two test methods improved significantly (R ² = 0.93; P value = 0.001) when relatively high-porosity stone materials (porosity ≥1%) were separately evaluated. Both methods of abrasion resistance employed in the present study showed statistically significant linear correlations with uniaxial compressive strength and Brazilian tensile strength, the former proving to be a more influencing parameter on resistance to abrasion. Also, from the point view of representing actual abrasion mechanism of stone materials in practice, the necessity of simulating multi-directional foot traffic in abrasion testing methods was discussed. In this respect, the reference test method in the EN 14157 Standard was criticized for not fully meeting this requirement. It was also pointed out that the reference method could have some drawbacks when applied to coarse-grained granitic rocks having cleavable minerals such as plagioclase and orthoclase feldspars.     

离子色谱法测定水样中S~(2-)、SO_3~(2-)、SO_4~(2-)、S_2O_3~(2-)

该种方法利用离子色谱仪的电导检测器与电化学检测器串联 ,十几分钟即可连续完成水中S2 - 、SO2 - 3 、SO2 - 4、S2 O2 - 3 的测定 ,方法具有快速、高效、方便、灵敏、选择性好等特点。方法的检出限分别为 :S2 - 12 5 μg/L ;SO2 - 3 2 2 4 μg/L ;SO2 - 45 0 μg/L ;S2 O2 - 35 0 μg/L。相对标准偏差在 1 5 %～ 6 9%之间 ,能够满足水中S2 - 、SO2 - 3 、SO2 - 4、S2 O2 - 3四种阴离子分析测试的需要。     

Environmental controls on clay mineralogy of an Early Jurassic mudrock (Blue Lias Formation,southern England)

We present a dataset including clay mineralogy, gamma-ray spectrometry, organic matter content and magnetic susceptibility of the Hettangian to lowest Sinemurian successions of Dorset and Somerset, southern UK (Blue Lias Formation, Bristol Channel and Wessex basins). In both areas, the clay assemblages comprise predominantly detrital illite, kaolinite and illite/smectite mixed layers. Clays probably originated from the erosion of the Hercynian massifs, the relative proportions of kaolinite and illite being modulated by arid-humid climatic fluctuations. The organic matter (OM) content (types II to IV) ranges up to 12% in both areas. A clear stratigraphical trend in clay mineral assemblages is apparent in Somerset, whereas in Dorset sharp contrasts between adjacent horizons and a greater dilution by carbonate mask the long-term evolution. Correlations between both areas based on similar vertical trends in clay mineral abundance support the suggestion of a hiatus within the angulata Zone of the Dorset succession. As expected, the kaolinite/illite ratio correlates with the Th/K ratio deduced from gamma-ray spectrometry. However, significant departures from the correlation occur in OM-rich intervals, suggesting that Th may be partly adsorbed on to OM particles. Surprisingly, high magnetic susceptibility correlates with abundant kaolinite, not with Fe-rich clays, indicating either that kaolinite is accompanied by a soil-inherited magnetisable phase (possibly iron oxide) or that illite-rich rocks are more strongly diluted by carbonate than are kaolinite-rich strata.     

Arsenic in contaminated soils and anthropogenic deposits at the Mokrsko,Roudný, and Kašperské Hory gold deposits,Bohemian Massif (CZ)

Soil, mine tailing, and waste dump profiles above three mesothermal gold deposits in the Bohemian Massif with different anthropogenic histories have been studied. Their mineralogical, major element, and arsenic (As) contents and the contents of secondary arsenic minerals were analyzed. The As-bearing minerals were concentrated and determined using X-ray diffraction (XRD) analysis, the Debye-Scherrer powder method, scanning electron microscopy (SEM), and energy-dispersive microanalysis (EDAX). The amorphous hydrous ferric oxides (HFO), As-bearing goethite, K-Ba- or Ca-Fe- and Fe- arsenates pharmacosiderite, arseniosiderite, and scorodite, and sulfate-arsenate pitticite were determined as products of arsenopyrite or arsenian pyrite oxidation. The As behaviour in the profiles studied differs in dependence on the surface morphology, chemical and mineralogical composition of the soil, mine wastes or tailings, oxidation conditions, pH, presence of (or distance from) primary As mineralization in the bedrock, and duration of the weathering effect. Although the primary As mineralization and the bedrock chemical composition are roughly similar, there are distinct differences in the As behaviour amongst the Mokrsko, Roudný and Kaperské Hory deposits.     

Investigations and assessment of the landslide hazards of Fengdu county in the reservoir region of the Three Gorges project on the Yangtze River

The spatial database of landslides in Fengdu County of the reservoir region of the Three Gorges project (TGP) on the Yangtze River was compiled from a variety of different sources including field investigations on landslides, existing catalogues and archives on landslides, reports of meteorological events and human engineering activities that triggered slope failures. The major factors that are found to have affected the slope stabilities are outlined, and an assessment and zonation of landslide hazards of the region is made using an integrated information model, which is divided into destructive, disastrous, likely disastrous and essentially non-disastrous areas from the assessment of landslide hazards. The destructive and disastrous areas are respectively 1.9 and 13.8% of the total region, mostly being nearby townships, highways along the south bank of the Yangtze River and residential quarters along two flanks of the Yangtze River and its distributaries, that will impose direct impact to highway transportation and residential lives, and may effect to some degree the navigation of the Yangtze River, reservoir banks, and building of cities and towns.     

The effect of chemical composition and oxygen fugacity on the electrical conductivity of dry and hydrous garnet at high temperatures and pressures

The in situ electrical conductivity of hydrous garnet samples (Py₂₀Alm₇₆Grs₄–Py₇₃Alm₁₄Grs₁₃) was determined at pressures of 1.0–4.0 GPa and temperatures of 873–1273 K in the YJ-3000t apparatus using a Solartron-1260 impedance/gain-phase analyzer for various chemical compositions and oxygen fugacities. The oxygen fugacity was controlled by five solid-state oxygen buffers (Fe₂O₃ + Fe₃O₄, Ni + NiO, Fe + Fe₃O₄, Fe + FeO, and Mo + MoO₂). Experimental results indicate that within a frequency range from 10⁻² to 10⁶ Hz, electrical conductivity is strongly dependent on signal frequency. Electrical conductivity shows an Arrhenius increase with temperature. At 2.0 GPa, the electrical conductivity of anhydrous garnet single crystals with various chemical compositions (Py₂₀Alm₇₆Grs₄, Py₃₀Alm₆₇Grs₃, Py₅₆Alm₄₃Grs₁, and Py₇₃Alm₁₄Grs₁₃) decreases with increasing pyrope component (Py). With increasing oxygen fugacity, the electrical conductivity of dry Py₇₃Alm₁₄Grs₁₃ garnet single crystal shows an increase, whereas that of a hydrous sample with 465 ppm water shows a decrease, both following a power law (exponents of 0.061 and −0.071, respectively). With increasing pressure, the electrical conductivity of this hydrous garnet increases, along with the pre-exponential factors, and the activation energy and activation volume of hydrous samples are 0.7731 ± 0.0041 eV and −1.4 ± 0.15 cm³/mol, respectively. The results show that small hopping polarons ( \textFe_\textMg ^· ) \left( {{\text{Fe}}_{\text{Mg}}^{ \cdot } } \right) and protons ( \textH ^· {\text{H}}^{ \cdot } ) are the dominant conduction mechanisms for dry and wet garnet single crystals, respectively. Based on these results and the effective medium theory, we established the electrical conductivity of an eclogite model with different mineral contents at high temperatures and high pressures, thereby providing constraints on the inversion of field magnetotelluric sounding results in future studies.     

Release of heavy metals during weathering of the Lower Cambrian Black Shales in western Hunan,China

Weathering of heavy metal enriched black shales may be one of the most important sources of environmental contamination in areas where black shales are distributed. Heavy metal release during weathering of the Lower Cambrian Black Shales (LCBS) in western Hunan, China, was investigated using traditional geochemical methods and the ICP-MS analytical technique. Concentrations of 16 heavy metals, 8 trace elements and P were measured for samples from selected weathering profiles at the Taiping vanadium ore mine (TP), the Matian phosphorous ore mine (MT), and Taojiang stone-coal mine (TJ). The results show that the bedrock at these three profiles is enriched with Sc, V, Cr, Co, Ni, Cu, Zn, Pb, Th, U, Mo, Cd, Sb, Tl, and P. Based on mass-balance calculation, the percentages of heavy metals released (in % loss) relative to immobile element Nb were estimated. The results show significant rates of release during weathering of: V, Cr, Co, Ni, Cu, Zn, U, Mo, Cd, Sn, Sb, and Tl for the TP profile; Sc, Cr, Mn, Co, Ni, Cu, Zn, Pb, Th, Cd, and Sn for the MT profile; and Sc, Mn, Co, Ni, Zn, Th, Cd, Sn, and Tl for the TJ profile. Among these heavy metals, Co, Ni, Zn, Cd, and Sn show very similar features of release from each of the three weathering profiles. The heavy metals released during weathering may affect the environment (especially topsoil and surface waters) and are possibly related to an observed high incidence of endemic diseases in the area.     

<Superscript>10</Superscript>Be, <Superscript>18</Superscript>O and radiogenic isotopic constraints on the origin of adakitic signatures: a case study from Solander and Little Solander Islands,New Zealand

Subduction-related Quaternary volcanic rocks from Solander and Little Solander Islands, south of mainland New Zealand, are porphyritic trachyandesites and andesites (58.20–62.19 wt% SiO₂) with phenocrysts of amphibole, plagioclase and biotite. The Solander and Little Solander rocks are incompatible element enriched (e.g. Sr ~931–2,270 ppm, Ba ~619–798 ppm, Th ~8.7–21.4 ppm and La ~24.3–97.2 ppm) with MORB-like Sr and Nd isotopic signatures. Isotopically similar quench-textured enclaves reflect mixing with intermediate (basaltic-andesite) magmas. The Solander rocks have geochemical affinities with adakites (e.g. high Sr/Y and low Y), whose origin is often attributed to partial melting of subducted oceanic crust. Solander sits on isotopically distinct continental crust, thus excluding partial melting of the lower crust in the genesis of the magmas. Furthermore, the incompatible element enrichments of the Solander rocks are inconsistent with partial melting of newly underplated mafic lower crust; reproduction of their major element compositions would require unrealistically high degrees of partial melting. A similar argument precludes partial melting of the subducting oceanic crust and the inability to match the observed trace element patterns in the presence of residual garnet or plagioclase. Alternatively, an enriched end member of depleted MORB mantle source is inferred from Sr, Nd and Pb isotopic compositions, trace element enrichments and εHf ? 0 CHUR in detrital zircons, sourced from the volcanics. ¹⁰Be and Sr, Nd and Pb isotopic systematics are inconsistent with significant sediment involvement in the source region. The trace element enrichments and MORB-like Sr and Nd isotopic characteristics of the Solander rocks require a strong fractionation mechanism to impart the high incompatible element concentrations and subduction-related (e.g. high LILE/HFSE) geochemical signatures of the Solander magmas. Trace element modelling shows that this can be achieved by very low degrees of melting of a peridotitic source enriched by the addition of a slab-derived melt. Subsequent open-system fractionation, involving a key role for mafic magma recharge, resulted in the evolved andesitic adakites.     

Micro- and nano-textural evidence of Ti(–Ca–Fe) mobility during fluid–rock interactions in carbonaceous lawsonite-bearing rocks from New Zealand

Understanding the mobility of chemical elements during fluid–rock interactions is critical to assess the geochemical evolution of a rock undergoing burial and metamorphism and, more generally, to constrain the geochemical budget of the subduction factory. In particular, determining the behavior and mobility of Ti in aqueous fluids constitutes a great challenge that is still under scrutiny. Here, we study plant fossils preserved in blueschist metasedimentary rocks from the Marybank Formation (New Zealand). Using scanning and transmission electron microscopies (SEM and TEM), we show that the carbonaceous material (CM) composing the fossils contains abundant nano-inclusions of Ti- and Fe-oxides. These nanocrystals are mainly anatase, rutile, and Fe–Ti oxides. The mineral composition observed within the fossils is significantly different from that detected in the surrounding rock matrix. We propose that Ti and Fe might have been mobilized by the alteration of a detrital Ti–Fe-rich protolith during an early diagenetic event under acidic and reducing conditions. Aqueous fluids rich in organic ligands released by the degradation of organic matter may have been involved. Moreover, using mass balance and petrological observations, we show that the contrasted mineralogy between the rock matrix and the fossil CM might be the consequence of the chemical isolation of fossil CM during the prograde path of the rock. Such an isolation results from the early formation of quartz and Fe-rich phyllosilicate layers enclosing the fossil as characterized by SEM and TEM investigations. Overall, this study shows that investigating minerals associated with CM down to the nanometer scale in metamorphic rocks can provide a precious record of early prograde geochemical conditions.     

Metasomatism and the crystallization of zircon megacrysts in Archaean peridotites from the Lewisian complex,NW Scotland

Zircon megacrysts are locally abundant in 1–40 cm-thick orthopyroxenite veins within peridotite host rocks in the Archaean Lewisian gneiss complex from NW Scotland. The veins formed by metasomatic interaction between the ultramafic host and Si-rich melts are derived from partial melting of the adjacent granulite-facies orthogneisses. The interaction produced abundant orthopyroxene and, within the thicker veins, phlogopite, pargasite and feldspathic bearing assemblages. Two generations of zircon are present with up to 1 cm megacrystic zircon and a later smaller equant population located around the megacryst margins. Patterns of zoning, rare earth element abundance and oxygen isotopic compositions indicate that the megacrysts crystallized from crustal melts, whereas the equant zircon represents new neocryst growth and partial replacement of the megacryst zircon within the ultramafic host. Both zircon types have U–Pb ages of ca. 2464 Ma, broadly contemporaneous with granulite-facies events in the adjacent gneisses. Zircon megacrysts locally form?>?10% of the assemblage and may be associated to zones of localized nucleation or physically concentrated during movement of the siliceous melts. Their unusual size is linked to the suppression of zircon nucleation and increased Zr solubility in the Si-undersaturated melts. The metasomatism between crustal melts and peridotite may represent an analog for processes in the mantle wedge above subducting slabs. As such, the crystallization of abundant zircon in ultramafic host rocks has implications for geochemistry of melts generated in the mantle and the widely reported depletion of high field strength elements in arc magmas.