Effects of ground water exchange on the hydrology and ecology of surface water

Ground water exchange affects the ecology of surface water by sustaining stream base flow and moderating water-level fluctuations of ground water-fed lakes. It also provides stable-temperature habitats and supplies nutrients and inorganic ions. Ground water input of nutrients can even determine the trophic status of lakes and the distribution of macrophytes. In streams the mixing of ground water and surface water in shallow channel and bankside sediments creates a unique environment called the hyporheic zone, an important component of the lotic ecosystem. Localized areas of high ground water discharge in streams provide thermal refugia for fish. Ground water also provides moisture to riparian vegetation, which in turn supplies organic matter to streams and enhances bank resistance to erosion. As hydrologists and ecologists interact to understand the impact of ground water on aquatic ecology, a new research field called "ecohydrology" is emerging.     

Element partitioning between olivine and silicate melt under high pressure

Element partitioning between olivine and silicate melt has been investigated at pressures 1–14 GPa, by using a 6–8 type multi-anvil high pressure apparatus. In order to observe systematics in the partitioning of trivalent ions, Li was added to the starting materials in order to increase the concentration of trivalent ions in olivine. With increasing pressure, it was found that partition coefficients of most of the elements gradually decreased. Trivalent ions generally showed parabolic pattern on partition coefficient — ionic radius diagram. When pyrolite-like material was used as the starting material, partition coefficient of Al, D_Al, gradually increased with increase in pressure while the partition coefficients of the other elements decreased, and the D_Al deviated from the parabolic pattern of other trivalent ions. The deviation of D_Al from the D pattern of the other trivalent ions was also found when olivine was employed as main component of the starting material. This result may be ascribed to the compositional change of coexisting silicate melt with increase in pressure.     

Rifting and basin inversion in the eastern margin of the Japan Sea

Abstract Extensional basin formation and subsequent basin inversion in the southern area of the eastern margin of the Japan Sea were studied on the basis of the interpretation of seismic profiles (total length approximately 15 000 km) and the fossil analyses of 77 sea-bottom samples. Rift (Early to Early Middle Miocene), post-rift (Middle to Late Miocene), pre-inversion (Late Miocene to Pliocene) and inversion stages (Pliocene to Quaternary) were differentiated by the extension and contraction of the crust. Many small-scale rifts were formed in the Sado Ridge and the Mogami Trough during the rift stage, simultaneous with back-are spreading of the Japan Sea. Most of the rifts were east- or southeast-facing, rotational half-grabens bounded by west-dipping normal faults at their eastern boundaries. The syn-rift sequence can be divided into lower and upper units by an erosional surface. The sequences are presumed to be composed mainly of fining-upward sediments. The trend of most rifts is north-northeast with the remainder being of east-northeast-bias. The north-northeast trending rifts are distributed widely in the Sado Ridge and Mogami Trough and do not show an en échelon arrangement, suggesting that they were formed mainly by pure extension nearly perpendicular to the arc. The east-northeast trending rifts are presumed to have been developed by a north-northwest extension in the late rift stage, which may have accompanied a right-lateral movement in the eastern margin of the Japan Sea. During the post-rift stage, the rifts and adjacent horsts subsided and became covered by the post-rift sequence, characterized by parallel and continuous reflections. This suggested no significant tectonic movements in this period. In the pre-inversion stage many of the rifts subsided again, presumably because of down-warping due to weak compressional stress. The normal faults reactivated as reverse faults during the inversion stage due to an increase in compressional stress. Many of the rifts have been uplifted and transformed into east-vergent asymmetric anticlines. The basin inversion is greatest in the Sado Ridges and in the Dewa Bank Chain, while it is least developed in the Mogami Trough and in the western slope of the Sado Ridge, in which some normal faults have not been reactivated. The increase and decrease of the inversion corresponds to the peak and trough of undulation at an interval of about 50 km trending parallel to the arc.     

Calorimetric study of high-pressure polymorphs of MnSiO3

With increasing pressure, MnSiO₃ rhodonite stable at atmospheric pressure transforms to pyroxmangite, then to clinopyroxene and further to tetragonal garnet, which finally decomposes into MnO (rocksalt) plus SiO₂ (stishovite). High temperature solution calorimetry of synthetic rhodonite, clinopyroxene and garnet forms of MnSiO₃ was used to measure the enthalpies of these transitions. ΔH ₉₇₄ ⁰ for the rhodonite-clinopyroxene and ΔH ₂₉₈ ⁰ for the clinopyroxene-garnet transition are 520±490 and 8,270±590 cal/mol, respectively. The published data on the enthalpy of the rhodonite-pyroxmangite transition, phase equilibrium boundaries, compressibility and thermal expansion data are used to calculate entropy changes for the transitions. The enthalpy, entropy and volume changes are very small for all the transitions among rhodonite, pyroxmangite and clinopyroxene. The calculated boundary for the clinopyroxene-garnet transition is consistent with the published experimental results. The pyroxene-garnet transition in several materials, including MnSiO₃, is characterized by a relatively small negative entropy change and large volume decrease, resulting in a small positiveP – T slope. The disproportionation of MnSiO₃ garnet to MnO plus stishovite and of Mn₂SiO₄ olivine to garnet plus MnO are calculated to occur at about 17–18 and 14–15 GPa, respectively, at 1,000–1,500 K.     

Prograde pressure-temperature path of jadeite-bearing eclogites and associated high-pressure/low-temperature rocks from western Tianshan, northwest China

Abstract Jadeite‐bearing eclogites and associated blueschists locally crop out in a greenschist facies area at Kuldkourla, near the Akeyazhi River in the western Chinese Tianshan region, northwestern China. Garnet in these metamorphic rocks shows prograde zoning with increasing Mg and decreasing Mn from the crystal center towards the rim, and is divided into Ca‐poor/Fe‐rich core and Ca‐rich/Fe‐poor mantle parts. The garnet cores include the assemblages of (i) jadeite/omphacite (X_jd = 0.34–0.96) + barroisite/taramite; and (ii) omphacite + barroisite/pargasite, with paragonite, epidote, rutile and quartz as major phases with rare albite. The garnet mantles rarely contain inclusions of omphacite, glaucophane, epidote, rutile and quartz. Major matrix phases of the pre‐exhumation stage are omphacite, glaucophane, paragonite, rutile and quartz. These mineral parageneses give pressure (P)‐temperature (T) conditions of 0.9 GPa/390°C?1.4 GPa/560°C for the stage of the garnet core formation, 1.8 GPa/520°C for the stage of the garnet mantle formation, and 2.2 GPa/495°C‐2.4 GPa/535°C for the peak eclogite facies assemblage in the matrix. The estimated P‐T conditions and continuous changes of mineral parageneses imply a counterclockwise P‐T path which is a combination of (i) an early prograde stage of high‐pressure/low‐temperature (HP/LT) blueschist facies and/or LP/LT eclogite facies; (ii) a later prograde stage involving compression with minimal heating; and (iii) a climax‐of‐subduction stage characterized by a slight decrease of temperature with increasing pressure. The negative dP/dT of the latest subduction stage is possibly a record of the following events after a continuous subduction and ridge approach: (i) material migration within the upper part of the subducting slab, which has an inverse thermal gradient caused by ductile flow and/or slab break during subduction; and/or (ii) temporary cooling of the wedge mantle–slab interface by continuous subduction of a relatively cold slab following subduction of a hotter ridge.     

Uniform network transformation for points pattern analysis on a non-uniform network

In the real world, there are many kinds of phenomena that are represented by points on a network, such as traffic accidents on a street network. To analyse these phenomena, the basic point pattern methods (i.e. the nearest neighbour distance method, the quadrat method, the K-function method and the clumping method) defined on a plane (referred to as the planar basic point pattern methods) are extended to the basic point pattern methods on a network (referred to as the network basic point pattern methods). However, like the planar basic point pattern methods, the network basic point pattern methods assume a uniform network and this assumption is hard to accept when analysing actual phenomena. To overcome this limitation, this paper formulates a transformation, called the uniform network transformation, that transforms a non-uniform network into a uniform network. This transformation provides a simple procedure for analysing point patterns on non-uniform networks: first, a given non-uniform network is transformed into a uniform network; second, the network basic point pattern methods (which assume a uniform network) are applied to this transformed uniform network. No modification to the network basic point pattern methods is necessary. The paper also shows an actual application of this transformation to traffic accidents in Chosei, Japan.     

CHIME monazite ages of metasediments from the Altai orogen in northwestern China: Devonian and Permian ages of metamorphism and their significance

Abstract   The chemical Th-U-total Pb isochron method (CHIME) has been applied to determine the ages of monazite grains from metasediments of greenscshist-amphibolite facies in the Altai orogen, northwest China. The area of distribution of these metamorphic rocks is divided into the Permian (261–268 Ma) central-western and Devonian (377–382 Ma) eastern units on the basis of their metamorphic ages. The Devonian CHIME ages are consistent with the Pb–Pb ages of granitoid in the eastern unit, and support the idea that emplacement of the granitoids was synchronous with regional metamorphism at deep levels. The Permian metamorphic ages (the present study) and igneous ages previously reported from the central-western unit can be interpreted in terms of subduction of crustal material and oceanic plate, and rapid exhumation.     

Integrated colors of globular clusters

Integrated colors of M3, M5, M13, and M92 are calculated from the luminosity function, the color-magnitude diagram, and the two-color diagram to compare them with observed ones. The results show good agreements for M3, M13, and M92 and the discrepancy for M5. Possible causes for this discrepancy are discussed.To study the way in which integrated colors are affected by changes in the distribution of stars in the color-magnitude diagram, we calculate the integrated colors by taking into account changes in the distribution of horizontal branch stars and in the ratio of the number of horizontal branch stars to that of red giant branch stars. The result shows that (B-V) color varies within the range of about 0.1 mag with changes in the distribution of horizontal branch stars, implying that the cluster with a well-developed blue horizontal branch has bluer intrinsic integrated (B-V) color than that with yellow one. This tendency is compared with observation.