Estimation methods for monthly humidity from dynamical downscaling data for quantitative assessments of climate change impacts

Methods are proposed to estimate the monthly relative humidity and wet bulb temperature based on observations from a dynamical downscaling coupled general circulation model with a regional climate model (RCM) for a quantitative assessment of climate change impacts. The water vapor pressure estimation model developed was a regression model with a monthly saturated water vapor pressure that used minimum air temperature as a variable. The monthly minimum air temperature correction model for RCM bias was developed by stepwise multiple regression analysis using the difference in monthly minimum air temperatures between observations and RCM output as a dependent variable and geographic factors as independent variables. The wet bulb temperature was estimated using the estimated water vapor pressure, air temperature, and atmospheric pressure at ground level both corrected for RCM bias. Root mean square errors of the data decreased considerably in August.     

Development of intermediate foodstuff derived from freshwater fish in China

According to the three-dimensional contour maps showing the gel-forming properties of surimi derived from freshwater fish, 8 species of surimi were classified into two types. The-valley type surimi （silver carp, big-head carp, Chinese snake head and blunt snout bream） shows easy setting, low resistance to gel collapse, high enhancement ability with two-step heating, and narrow optimum heating temperature and time area, which are of the same characteristics as the walleye pollack surimi. In contrast, the Plateau type surimi （tilapia, grass carp, mud carp and common carp） exhibits difficult setting, high resistance to gel collapse, no enhancement ability with two-step heating, and wide optimum heating temperature and time area. There are seasonal changes of gelling properties of silver carp surimi, and the setting ability of surimi gel is higher in winter and lower in summer. The marine fish meat gels and the freshwater fish meat gels have the same acceptability for inland Chinese according to the sensory evaluation results. A slight increase in sensory scorings of kamaboko gels occurred when the extract from walleye pollack muscle was added, especially in the odor scoring of silver carp kamaboko gels.     

High-Reflectivity Coatings for a Vacuum Ultraviolet Spectropolarimeter

Precise polarization measurements in the vacuum ultraviolet (VUV) region are expected to be a new tool for inferring the magnetic fields in the upper atmosphere of the Sun. High-reflectivity coatings are key elements to achieving high-throughput optics for precise polarization measurements. We fabricated three types of high-reflectivity coatings for a solar spectropolarimeter in the hydrogen Lyman-\(\upalpha \) (Ly\(\upalpha \); 121.567 nm) region and evaluated their performance. The first high-reflectivity mirror coating offers a reflectivity of more than 80 % in Ly\(\upalpha \) optics. The second is a reflective narrow-band filter coating that has a peak reflectivity of 57 % in Ly\(\upalpha \), whereas its reflectivity in the visible light range is lower than 1/10 of the peak reflectivity (\(\sim 5~\%\) on average). This coating can be used to easily realize a visible light rejection system, which is indispensable for a solar telescope, while maintaining high throughput in the Ly\(\upalpha \) line. The third is a high-efficiency reflective polarizing coating that almost exclusively reflects an s-polarized beam at its Brewster angle of 68° with a reflectivity of 55 %. This coating achieves both high polarizing power and high throughput. These coatings contributed to the high-throughput solar VUV spectropolarimeter called the Chromospheric Lyman-Alpha SpectroPolarimeter (CLASP), which was launched on 3 September, 2015.     

Continuous measurement of methane flux over a larch forest using a relaxed eddy accumulation method

We measured the methane flux of a forest canopy throughout a year using a relaxed eddy accumulation (REA) method. This sampling system was carefully validated against heat and CO₂ fluxes measured by the eddy covariance method. Although the sampling system was robust, there were large uncertainties in the measured methane fluxes because of the limited precision of the methane gas analyzer. Based on the spectral characteristics of signals from the methane analyzer and the diurnal variations in the standard deviation of the vertical wind velocity, we found the daytime and nighttime precision of half-hourly methane flux measurements to be approximately 1.2 and 0.7?μg?CH₄?m^?2?s^?1, respectively. Additional uncertainties caused by the dilution effect were estimated to affect the accuracy by as much as 0.21?μg?CH₄?m^?2?s^?1 on a half-hourly basis. Diurnal and seasonal variations were observed in the measured fluxes. The biological emission from plant leaves was not observed in our studies, and thus could be negligible at the canopy-scale exchange. The annual methane sink was 835?±?175?mg?CH₄?m^?2?year^?1 (8.35?kg?CH₄?ha^?1?year^?1), which was comparable to the flux range of 379–2,478?mg?CH₄?m^?2?year^?1 previously measured in other Japanese forest soils. This study indicated that the REA method could be a promising technique to measure canopy scale methane fluxes over forests, but further improvement of precision of the analyzer will be required.     

Application of chemical tracers to an estimate of benthic denitrification in the Okhotsk Sea

To estimate benthic denitrification in a marginal sea, we assessed the usefulness of \({\text{N}}_{2}^{*}\) , a new tracer to measure the excess nitrogen gas (N₂) using dissolved N₂ and argon (Ar) with N* in the intermediate layer (26.6–27.4σ _θ ) of the Okhotsk Sea. The examined parameters capable of affecting \({\text{N}}_{2}^{*}\) are denitrification, air injection and rapid cooling. We investigated the relative proportions of these effects on \({\text{N}}_{2}^{*}\) using multiple linear regression analysis. The best model included two examined parameters of denitrification and air injection based on the Akaike information criterion as a measure of the model fit to data. More than 80 % of \({\text{N}}_{2}^{*}\) was derived from the denitrification, followed by air injection. Denitrification over the Okhotsk Sea shelf region was estimated to be 5.6 ± 2.4 μmol kg^?1. The distribution of \({\text{N}}_{2}^{*}\) was correlated with potential temperature (θ) between 26.6 and 27.4σ _θ (r = ?0.55). Therefore, we concluded that \({\text{N}}_{2}^{*}\) and N* can act complementarily as a quasi-conservative tracer of benthic denitrification in the Okhotsk Sea. Our findings suggest that \({\text{N}}_{2}^{*}\) in combination with N* is a useful chemical tracer to estimate benthic denitrification in a marginal sea.     

Is the empirical coefficient b for the relaxed eddy accumulation method constant?

The relaxed eddy accumulation (REA) method is an attractive alternative to the eddy covariance method to measure trace-gas flux, because it allows the use of analyzers with an optimal integration time to reduce the noise. However, the use of an empirical coefficient b results in uncertainties in the REA method. The consistency of b for temperature was investigated using a 1 year dataset obtained at three forest sites in East Asia: a temperate evergreen coniferous forest, a tropical evergreen broadleaf forest, and a cool-temperate deciduous coniferous forest. The observational b ranged from 0.54 to 0.57 under unstable conditions. Although the values for observational b were within narrow ranges among the sites, there were slight site-specific differences. We introduced new expression of b, similarity b, based on scalar similarity using the integral turbulence characteristics to investigate the nature of b. Both the observational and similarity b increased with increasing atmospheric stability under stable conditions, when lower values for the standard deviation of the vertical wind velocity resulted in higher values for b. The variations in b under stable conditions differed among sites. There were no seasonal variations in the observational b at all sites. Consequently, the present study recommends determining the coefficient b for unstable conditions for each site and considering changes in b associated with atmospheric stability in order to minimize errors in the REA method.     

Anthropogenic Pb in settling particulate matter in the Northwestern Pacific examined using stable isotopes of Pb

We have investigated Pb concentrations and isotopic compositions in settling particles collected by sediment traps experiments over a period of two years, from May 2005 to April 2007, at two depths, 770 and 5100 m, at station KNOT in the Northwestern Pacific Ocean (44°N, 155°E). To the identify provenances of Pb, the samples were separated into two fractions by chemical leaching techniques, with the leachate expected to contain Pb of anthropogenic origin. Isotopic compositions of Pb and concentrations of Pb, Sc, Mn, La, Yb, and Th were measured by quadrupole ICP-MS. The isotope ratios of leachable Pb in settling particles were ²⁰⁷Pb/²⁰⁶Pb = 0.860 ± 0.001; ²⁰⁸Pb/²⁰⁶Pb = 2.116 ± 0.002 (mean ± 95% confidence intervals), which are similar to those of aerosols in China that are greatly affected by pollution from coal combustion. We estimated the mean contribution from anthropogenic Pb sources to the Pb in settling particles, using the conventional binary (anthropogenic and natural Pb) mixing equation for Pb isotopes, as 90% in the upper trap and 78% in the lower trap. Furthermore, we found a significant negative correlation between the isotope ratios of Pb and concentrations of leachable Mn, normalized to those of leachable Pb, suggesting that manganese oxides play an important role in transporting Pb from the upper layers of the ocean to the deeper layers. Our results support the speculation published in a previous study that Pb might be scavenged by Mn oxides in the Northwestern Pacific Ocean.     

Consistent DOF reduction of tall steel frames

This paper presents an energy‐consistent approach for reducing the number of degrees‐of‐freedom (DOFs) in tall steel frames. In the present approach, the moment resistance of beams and columns in each story is represented by the moment resistance of a rotational spring and a beam‐column element, respectively. The shear resistance provided by braces in each story is represented by the shear resistance of a shear spring. Furthermore, the resistance to the overturning moment provided by axial resistance of columns in each story is represented by the moment resistance of a rotational spring. These representations are carried out by achieving the equivalence between the strain energy stored and dissipated in the elements in the full (unreduced) DOF models and the strain energy stored and dissipated in the corresponding elements in the reduced DOF models. The accuracy of the present approach is demonstrated through numerical examples, which compare the results of nonlinear time history analyses obtained using the full and reduced DOF models. In the numerical examples, the response is estimated for 20‐story and 40‐story steel frames with and without buckling‐restraint braces subjected to a suite of near‐fault and far‐fault ground motions. The present approach is useful in estimating the response of tall steel frames having non‐regular member arrangements to a suite of intense ground motions including near‐fault ones, where it is crucial to capture the influence of higher mode effects on collapse mechanisms. Copyright © 2017 John Wiley & Sons, Ltd.     

Long-range transport of Asian emissions to the West Pacific tropical tropopause layer

Journal of Atmospheric Chemistry - Rapid transport by deep convection is an important mechanism for delivering surface emissions of reactive halocarbons and other trace species to the tropical...