Photochemical changes in chemical markers of sedimentary organic matter source and age

Several chemical markers of organic matter source and age are shown to be susceptible to light-induced alteration. To test for the photochemical lability of markers previously employed for sediments from the Louisiana coastal zone, we subjected sediments under resuspension conditions to simulated sunlight, and monitored changes in C:N and Br:OC ratios, δ¹³C, Δ¹⁴C, and lignin composition. Markers of terrigenous origin (high C:N, lignin) decreased and δ¹³C became enriched in sediments containing primarily terrigenous organic matter, while a marker of marine organic matter (Br:OC) decreased in samples containing significant contributions from this source. Preferential loss of ¹⁴C from all sediments indicated enhanced photochemical lability of organic matter of relatively recent origin, consistent with the changes in chemical markers. Most, but not all, experimental alterations are consistent with field distributions of these markers. Relatively small experimental changes in the markers in combination with confounding processes in the environment, however, prevent these parallel trends from providing any more than a consistency test for the importance of photochemical reactions in this region.     

Runoff-generated debris flows: Observation of initiation conditions and erosion–deposition dynamics along the channel at Cancia (eastern Italian Alps)

In the Dolomitic region, abundant coarse hillslope sediment is commonly found at the toe of rocky cliffs. Ephemeral channels originate where lower permeability bedrock surfaces concentrate surface runoff. Debris flows initiate along such channels following intense rainfall and determine the progressive erosion and deepening of the channels. Sediment recharge mechanisms include rock fall, dry ravel processes and channel-bank failures. Here we document debris flow activity that took place in an active debris flow basin during the year 2015. The Cancia basin is located on the southwestern slope of Mount Antelao (3264 m a.s.l.) in the dolomitic region of the eastern Italian Alps. The 2.5 km² basin is incised in dolomitic limestone rocks. The data consist of repeated topographic surveys, distributed rainfall measurements, time-lapse (2 s) videos of two events and pore pressure measurements in the channel bed. During July and August 2015, two debris flow events occurred, following similarly intense rainstorms. We compared rainfall data to existing rainfall triggering thresholds and simulated the hydrological response of the headwater catchment with a distributed model in order to estimate the total and peak water discharge. Our data clearly illustrate how debris entrainment along the channel is the main contributor to the overall mobilized volume and that erosion is dominant when the channel slope exceeds 16°. Further downstream, sediment accumulation and depletion occurred alternately for the two successive events, indicating that sediment availability along the channel also influences the flow behaviour along the prevailing-transport reach. The comparison between monitoring data, topographical analysis and hydrological simulation allows the estimation of the average solid concentration of the two events and suggests that debris availability has a significant influence on the debris flow volume. © 2020 John Wiley & Sons, Ltd.     

Variation of the gradient and balmer discontinuity during the eclipse of the variable RW Tauri: Comparison between observations and theory

For the first time after Barbier and Chalonge's (1938, 1941) pioneering works, the variations of b andD during the eclipse of a variable (RT Tau), have been observed. The observations have been performed at the Observatories of Jungfraujoch and Haute Provence with the photoelectric system in seven colors of Geneva (Golay, 1964; Hauck, 1968). The comparison between the observed curves ofD and the theoretical ones, provides the limb darkening coefficients; the same comparison between the observed b (reddened) and theoretical ones (not reddened) together with that ofD, points out some anomalies of the variable RW Tau.

---

Sommario Per la prima volta, dopo i primi lavori di Barbier e Chalonge (1938, 1941), sono state osservate le variazioni di b eD durante l'eclisse di una variabile (RW Tau). Le osservazioni sono state fatte agli Osservatori della Jungfraujoch e di Haute Provence col sistema fotoelettrico in sette colori di Ginevra (Golay, 1964; Hauck, 1968). Il confronto fra le curve osservate e teoriche diD, fornisce i coefficienti di oscuramento al bordo; lo stesso confronto fra i b osservati (arrossati) e quelli teorici (non arrossati) unitamente a quello delleD mette in evidenza alcune anomalie della variabile RW Tau.

     

Iron isotope fractionation by Fe(II)-oxidizing photoautotrophic bacteria

Photoautotrophic bacteria that oxidize ferrous iron (Fe[II]) under anaerobic conditions are thought to be ancient in origin, and the ferric (hydr)oxide mineral products of their metabolism are likely to be preserved in ancient rocks. Here, two enrichment cultures of Fe(II)-oxidizing photoautotrophs and a culture of the genus Thiodictyon were studied with respect to their ability to fractionate Fe isotopes. Fe isotope fractionations produced by both the enrichment cultures and the Thiodictyon culture were relatively constant at early stages of the reaction progress, where the ⁵⁶Fe/⁵⁴Fe ratios of poorly crystalline hydrous ferric oxide (HFO) metabolic products were enriched in the heavier isotope relative to aqueous ferrous iron (Fe[II]_aq) by ∼1.5 ± 0.2‰. This fractionation appears to be independent of the rate of photoautotrophic Fe(II)-oxidation, and is comparable to that observed for Fe isotope fractionation by dissimilatory Fe(III)-reducing bacteria. Although there remain a number of uncertainties regarding how the overall measured isotopic fractionation is produced, the most likely mechanisms include (1) an equilibrium effect produced by biological ligands, or (2) a kinetic effect produced by precipitation of HFO overlaid upon equilibrium exchange between Fe(II) and Fe(III) species. The fractionation we observe is similar in direction to that measured for abiotic oxidation of Fe(II)_aq by molecular oxygen. This suggests that the use of Fe isotopes to identify phototrophic Fe(II)-oxidation in the rock record may only be possible during time periods in Earth’s history when independent evidence exists for low ambient oxygen contents.     

Mineralogical approaches to sourcing pipes and figurines from the eastern woodlands,U.S.A.

Provenance studies of stone artifacts often rely heavily upon chemical techniques such as neutron activation analysis. However, stone specimens with very similar chemical composition can have different mineralogies (distinctive crystalline structures as well as variations within the same mineral) that are not revealed by multielemental techniques. Because mineralogical techniques are often cheap and usually nondestructive, beginning with mineralogy allows the researcher to gain valuable information and then to be selective about how many samples are submitted for expensive and somewhat destructive chemical analysis, thus conserving both valuable samples and funds. Our University of Illinois team of archaeologists and geologists employs Portable Infrared Mineral Analyzer (PIMA) spectroscopy, X‐ray diffraction (XRD), and Sequential acid dissolution/XRD/Inductively coupled plasma (SAD‐XRD‐ICP) analyses. Two case studies of Hopewellian pipes and Mississippian figurines illustrate this mineralogical approach. The results for both studies identify sources relatively close to the sites where the artifacts were recovered: Sterling, Illinois (rather than Ohio) for the (Hopewell) pipes and Missouri (rather than Arkansas or Oklahoma) for the Cahokia figurines. © 2002 Wiley Periodicals, Inc.     

Thermal alteration experiments on organic matter in recent marine sediment—II. Isoprenoids

Several isoprenoid compounds were isolated from a heat-treated marine sediment in the southern California continental shelf (from Tanner Basin) which were not present in the original sediment. Among the compounds identified were: phytol, dihydrophytol, C₁₈-isoprenoid ketone, phytanic and pristanic acids, C₁₉- and C₂₀-monoolefins, and the alkanes 2,6,10-trimethylpentadecane, pristane and phytane. The significance and possible routes leading to these compounds is discussed.     

Mineralogy of suspended sediment in three karst springs

Springs in karstic carbonate rocks frequently carry a sediment load as well as a dissolved load. Analysis of morphology and mineralogy of suspended sediment from three contrasting karst springs reveals a suite of clastic particles that reflect both source areas and processes that take place within the aquifer. Nolte Spring in Lancaster County, Pennsylvania, USA, discharges sediment of apparently precipitated calcite, indicating that at some point in the aquifer or vadose zone, water exceeds saturation with respect to calcite. Sediment morphologies and chemical conditions in the aquifer point to two different scenarios for this precipitation. The other two springs, Arch Spring in Blair County, Pennsylvania and Bushkill Spring in Northampton County, Pennsylvania, show no evidence of calcite precipitation. Arch Spring discharges mainly layer silicates, while Bushkill Spring discharges mainly silica.

---

Resumen Los manantiales en rocas carbonatadas karstficadas tienen frecuentemente una carga de sedimentos y de sólidos disueltos. Los análisis de la morfología y mineralogía de los sedimentos suspendidos de tres manantiales kársticos contrastados revela un conjunto de partículas clásticas que reflejan ambas áreas fuente y los procesos que tienen lugar dentro del acuífero. Nolte Spring en el Condado de Lancaster, Pennsylvania, USA, descarga sedimento de calcita aparentemente precipitada indicando que en cierto punto del acuífero o en la zona vadosa, el agua supera la saturación con respecto a la calcita. La morfología de los sedimentos y las condiciones químicas en el acuífero apuntan a dos escenarios diferentes para esta precipitación. Los otras dos manantiales, Arch Spring en el Condado de Blair, Pennsylvania y Bushkill Spring en el Condado de Norhtampton, Pennsylvania, no muestran evidencia de precitación de calcita. Arch Spring descarga principalmente filosilicatos mientras que Bushkill Spring descarga fundamentalmente Sílice.

---

Résumé Les sources situées en contexte carbonaté karstique charrient fréquemment, outre les matières dissoutes, une charge solide. La morphologie et la minéralogie des sédiments en suspension issus de trois sources karstiques de caractéristiques distinctes ont été analysées : une série de particules clastiques, reflétant à la fois les secteurs des sources et les processus internes de l’aquifère, en ressort. Les sédiments issus de Nolte Spring (Comté de Lancaster, Pennsylvanie, Etats-Unis) sont constitués de calcite apparemment précipitée: ceci indique que l’eau atteint la sursaturation vis-à-vis de la calcite à un certain point de l’aquifère ou de la zone non-saturée. La morphologie des sédiments et les conditions chimiques au sein de l’aquifère mènent à deux scénarii différents pour expliquer cette précipitation. Les deux autres sources, Arch Spring (Comté de Blair, Pennsylvanie) et Bushkill Spring (Comté de Northampton, Pennsylvanie), ne présentent aucun indice de précipitation de calcite. Arch Spring exporte essentiellement des phyllosilicates, alors que la silice est majoritaire à Bushkill Spring.

     

A coupling of mixed and continuous Galerkin finite element methods for poroelasticity I: the continuous in time case

In this paper, we formulate a finite element procedure for approximating the coupled fluid and mechanics in Biot’s consolidation model of poroelasticity. Here, we approximate the pressure by a mixed finite element method and the displacements by a Galerkin method. Theoretical convergence error estimates are derived in a continuous in-time setting for a strictly positive constrained specific storage coefficient. Of particular interest is the case when the lowest-order Raviart–Thomas approximating space or cell-centered finite differences are used in the mixed formulation, and continuous piecewise linear approximations are used for displacements. This approach appears to be the one most frequently applied to existing reservoir engineering simulators.     

A water retention model accounting for void ratio changes in double porosity clays

This paper presents a constitutive model that predicts the water retention behaviour of compacted clays with evolving bimodal pore size distributions. In line with previous research, the model differentiates between the water present inside the saturated pores of the clay aggregates (the microstructure) and the water present inside the pores between clay aggregates (the macrostructure). A new formulation is then introduced to account for the effect of the macrostructural porosity changes on the retention behaviour of the soil, which results in a consistent evolution of the air-entry value of suction with volumetric deformations. Data from wetting tests on three different active clays (i.e. MX-80 bentonite, FEBEX bentonite, and Boom clay), subjected to distinct mechanical restraints, were used to formulate, calibrate, and validate the proposed model. Results from free swelling tests were also modelled by using both the proposed double porosity model and a published single porosity model, which confirmed the improvement in the predictions of degree of saturation by the present approach. The proposed retention model might be applied, for example, to the simulation of the hydromechanical behaviour of engineered bentonite barriers in underground nuclear waste repositories, where compacted active clays are subjected to changes of both suction and porosity structure under restrained volume conditions.

     

Performance studies of the fixed stress split algorithm for immiscible two-phase flow coupled with linear poromechanics

In this work, we measure the performance of the fixed stress split algorithm for the immiscible water-oil flow coupled with linear poromechanics. The two-phase flow equations are solved on general hexahedral elements using the multipoint flux mixed finite element method whereas the poromechanics equations are discretized using the conforming Galerkin method. We introduce a rigorous calculation of the update in poroelastic properties during the iterative solution of the coupled system equations. The effects of the coupling parameter on the performance of the fixed stress algorithm is demonstrated in two field studies: the Frio oil reservoir and the Cranfield injection site.