Using Clustered Heat Maps in Mineral Exploration to Visualize Volcanic-Hosted Massive Sulfide Alteration and Mineralization

Natural Resources Research - This study proposes an extension of a visualization approach common in biochemistry (the clustered heat maps—CHMs) to geochemical data with the main objective of...     

GEOSECS AtlanticSi profiles

Measurements of five cosmogenic³²Si vertical profiles in Atlantic waters (27°N to 60°S) are presented. The amounts of dissolved SiO₂ extracted range from 2 to 54 g; the amounts of water from which SiO₂ was extracted range between 540 kg and 270, 000 kg. In additon, SiO₂ recovered from four surface particulate composites (64°N to 61°S) were also analyzed for³²Si.³²Si measurements were made by milking and counting the daughter activity, ³²P. The net³²P activities range from 0.7 to 6.8 cph; typical errors in measurements of the³²P activities are 20–30%.The³²Si concentrations vary from 0.6 dpm/10⁶ kg of water in the North Atlantic surface waters to 235 dpm/10⁶ kg at 400 m depth in the circumpolar waters. The vertical profiles of³²Si at the five Atlantic stations approximately follow the Si profiles but the depth gradients are different. This would be expected also considering the in-situ release mechanisms due to dissolution and advection/diffusion from the bottom waters. Except for the circumpolar station 89, where the Si and³²Si profiles show the effect of marked vertical mixing (nearly depth independent profiles), the profiles show the following features: (1) specific activities of³²Si (³²Si/SiO₂ ratios) are lowest at intermediate depths, and (2) on an average the surface specific activities are higher, by 2–4 times, than the bottom water values. These data are consistent with generation of the highest specific activity³²Si waters at the surface, where Si concentrations are lowest and precipitation adds cosmogenic³²Si scavenged from the troposphere. Rapid removal of biogenic silica to the water-sediment interface, without much dissolution during transit, leads to the second regime of high³²Si specific activities.The³²Si inventories in the water column in the latitude belt 27°N-27°S are in the range (1–1.4) × 10⁻² dpm³²Si/cm², which is consistent with the expected fallout of cosmogenic³²Si. However, the³²Si column inventories south of 40°S are higher by a factor of 5–7, whereas the corresponding Si inventories increase by only a factor of 3. This excess³²Si in the Southern Ocean cannot be explained by direct fallout from the stratosphere or by melting of Antarctic snow and ice. Instead, this excess is maintained primarily by the southward deep-water transport of³²Si dissolved from sinking particulates.     

Korrelation der Sporenzonen der Oberen Trias und des Jura im Mittleren Orient und in Süddeutschland

Zusammenfassung Bei der sporenstratigraphischen Gliederung des mittleren Mesozoikums im Mittleren Orient konnten vom Nor bis zur Unteren Kreide 6 Sporenzonen unterschieden werden: Unterkreide:Ischyosporites variegatus — Rouseisporites laciniatus — Cicatricosisporites-Zone Malm:Ischyosporites variegatus — Rouseisporites laciniatus-Zone Dogger:Ischyosporites variegatus — Duplexisporites problematicus-Zone Lias:Concavisporites — Duplexisporites problematicus-Zone Rät:Concavisporites — Duplexisporites problematicus — Lophotriletes sangburensis — Ricciisporites tuberculatus-Zone Nor:Concavisporites — Duplexisporites problematicus — Lophotriletes sangburensis — Cyclotriletes oligogranifer-ZoneVergleichende Untersuchungen ergaben, daß diese Sporenzonen auch auf Süddeutschland übertragbar sind und den faunistischen Grenzen entsprechen. Nur die sporenstratigraphische Festlegung der Nor/Rätsowie der Dogger/Malm- und der Malm/Unterkreide-Grenze bedürfen noch der Verifizierung.

---

In the middle Mesozoic of the Middle East 6 spore-assoziations could be distinguished from the Norian to the Lower Cretaceous: Lower Cretaceous:Ischyosporites variegatus — Rouseisporites laciniatus — Cicatricosisporites zone Upper Jurassic:Ischyosporites variegatus — Rouseisporites laciniatus zone Middle Jurassic:Ischyosporites variegatus — Duplexisporites problematicus zone Lower Jurassic:Concavisporites — Duplexisporites problematicus zone Rhaetian:Concavisporites — Duplexisporites problematicus — Lophotriletes sangburensis — Ricciisporites tuberculatus zone Norian:Concavisporites — Duplexisporites problematicus — Lophotriletes sangburensis — Cyclotriletes oligogranifer zone.The interregional validity and the correspondance of these spore zones with the faunistic boundaries could be substantiated in equivalent sequences in Southern Germany. However, the palynological definition of the Norian/Rhaetian, Middle/Upper Jurassic and Jurassic/Cretaceous boundaries have still to be confirmed in other regions since suitable sections have not been available in Southern Germany.

---

Résumé Dans le Mésozoïque moyen du Moyen Orient, six zones de spores peuvent être distinguées du Norien au Crétacé inférieur: Crétacé inférieur: Zone àIschyosporites variegatus — Rouseisporites laciniatus — Cicatricosisporites Jurassique supérieur: Zone àIschyosporites variegatus — Rouseisporites laciniatus Jurassique moyen: Zone àIschyosporites variegatus — Duplexisporites problematicus Jurassique inférieur: Zone àConcavisporites — Duplexisporites problematicus Réthien: Zone àConcavisporites — Duplexisporites problematicus — Lophotriletes sangburensis — Ricciisporites tuberculatus Norien: Zone àConcavisporites — Duplexisporites problematicus — Lophotriletes sangburensis — Cyclotriletes oligogranifer Une étude comparative montre que les mêmes zones de spores existent en Allemagne du sud et qu'elles correspondent aux limites faunistiques. Toutefois, les limites Norien/ Rhétien, Dogger/Malm et Malm/Crétacé inférieur demandent à être vérifiées.

---

- : : Ischyosporites variegatus —Rouseisporites laciniatus — Cicatricosisporites : Ischyosporites variegatus — Rouseisporites laciniatus : Ischyosporites variegatus — Duplexisporites problematicus : Concavisporites — Duplexisporites problematicus : Concavisporites — Duplexisporites problematicus — Lophotriletes sangburensis — Ricciisporites tuberculatus : Concavisporites — Duplexisporites problematicus — Lophotriletes sangburensis — Cyclotriletes oligogranifer. , , . , /, / / .

     

Inverted-polarity electrical structures in thunderstorms in the Severe Thunderstorm Electrification and Precipitation Study (STEPS)

Balloon-borne electric field soundings and lightning mapping data have been analyzed for three of the storms that occurred in the Severe Thunderstorm Electrification and Precipitation Study field program in 2000 to determine if the storms had inverted-polarity electrical structures. The polarities of all or some of the vertically stacked charge regions in such storms are opposite to the polarities observed at comparable heights in normal storms. Analyses compared the charge structures inferred from electric field soundings in the storms with charges inferred from three-dimensional lightning mapping data. Charge structures were inferred from electric field profiles by combining the one-dimensional approximation of Gauss's law with additional information from three-dimensional patterns in the electric field vectors. The three different ways of inferring the charge structure in the storms were found to complement each other and to be consistent overall. Charge deposition by lightning possibly occurred and increased the charge complexity of one of the storms.Many of the cloud flashes in each case were inverted-polarity flashes. Two storms produced ground flash activity comprised predominantly of positive ground flashes. One storm, which was an isolated thunderstorm, produced inverted-polarity cloud flashes, but no flashes to ground. The positive and negative thunderstorm charge regions were found at altitudes where, respectively, negative and positive charge would be found in normal-polarity storms. Thus, we conclude that these storms had anomalous and inverted-polarity electrical structures. Collectively, these three cases (along with the limited cases in the refereed literature) provide additional evidence that thunderstorms can have inverted-polarity electrical structures.     

Derivation Of Refractive Index And Temperature Gradients From Optical Scintillometry To Correct Atmospherically Induced Errors For Highly Precise Geodetic Measurements

Refraction effects of optical beams are generally caused by an inhomogeneous propagation medium and are a major source of systematic errors in the precise optical determination of angles and distances in the atmospheric surface layer. In this contribution a method for deriving vertical temperature and refractive index gradients from optical scintillation is presented. Knowledge of these gradients is required for the compensation of atmospherically induced errors for highly precise terrestrial geodetic measurements, like direct transfer and levelling. The advantage of the present optical method is, that temperature and refractive index gradients can be derived as line-averaged values over the propagation path, which is not possible by meteorological point measurements. Field observations have been carried out with a displaced-beam scintillometer over flat terrain and under different atmospheric conditions in order to verify this method. The experiments show, that this method allows to derive accurate correction values for precise terrestrial geodetic measurements.     

Computation of 5-day temperature normals in western Europe and the Mediterranean area

Summary UsingCraddock's method of representing the annual temperature variation by a two-term harmonic form fitted to monthly means, the harmonic coefficients of 63 stations in western Europe and around the Mediterranean Sea, as well as the 5-day normals for 24 Mediterranean stations, were computed and tabulated. In addition, some of the harmonic coefficients were charted and isoplethed, showing very distinctly the influence of continentality and topography. These charts, together withCraddock's charts for northern and northwestern Europe, provide fairly complete coverage of Europe and the Mediterranean area.This paper was prepared in the offices of the Technical Support Division of the 2d Weather Wing, United States Air Force, as a matter of routine business. The information contained herein was presented at the 5th Meeting of the Italian Society of Geophysics and Meteorology by Dr.Ingrid Weiss (Genoa: 23–25 April 1957). Since the paper is of general interest to all meteorologists of the Mediterranean area, it is published here with the permission of the originating agency as «Mémoire No. 3 du Centre International de Recherches sur la Météorologie de la Méditerranée (CIRMM)».     

Major and trace elements in igneous rocks from apollo 15

The concentrations of major and trace elements have been determined in igneous rocks from Apollo 15. All materials analyzed have typical depletions of Eu except for minerals separated from sample 15085. Four samples have concentrations of trace elements that are similar to those of KREEP. The samples of mare basalt from Apollo 15 have higher concentrations of FeO, MgO, Mn, and Cr and lower concentrations of CaO, Na₂O, K₂O, and rare-earth elements (REE) as compared to the samples of mare basalt from Apollos 11, 12, and 14. The samples can be divided into two groups on the basis of their normative compositions. One group is quartz normative and has low concentrations of FeO while the other is olivine normative and has high concentrations of FeO. The trace element data indicate that the samples of olivine normative basalt could be from different portions of a single lava flow. At least two and possible three parent magmas can be identified from the samples of the quartz normative group on the basis of their concentration ratios of Sm to Eu. Within each group, the compositions of the samples appear to be related by crystallization of olivine or pyroxene. Significant variations of the ratio of concentration of Sm to Eu cannot be produced without plagioclase-liquid equilibrium. The source material of mare basalt may be depleted in Eu. Alternatively, the magmas may have assimilated a small volume of material similar to KREEP.Paper dedicated to Prof. Harold C. Urey on the occasion of his 80th birthday on 29 April 1973.     

Newly identified historical tornadoes in the Czech Republic from 16th to the 20th centuries

Tornadoes have occurred in the territory of the Czech Republic throughout history. Although their frequency and intensity are not as high as in the USA, they can cause severe damage as well. That is why a systematic effort to document individual occurrences of this dangerous meteorological phenomenon as far as possible back into the past began in the 1990s. The aim of this investigation is to extend the first European catalogue of tornadoes originally published by Wegener [Wegener A., 1917. Wind-und Wasserhosen in Europe], by the addition of these cases from the Czech Republic.This paper adds further to Setvák, Šálek and Munzar [Setvák M., Šálek M., Munzar J., 2003. Tornadoes within the Czech Republic—from medieval chronicles to the internet society. Atmos. Res. 67–68, 589–605], who reported the earliest documented tornado in the land of the Czech Republic which occurred in AD 1119 in Prague. In so doing, it presents recently discovered tornado cases from the 16th to the early 20th centuries, found in a variety of historical sources since the last ECSS conference held in Prague in 2002. In particular we will focus on the case from Jablonec nad Nisou (northern Bohemia) in 1925, which was probably the first case in the Czech Republic with accompanying photographic documentation of damage caused by a tornado.     

Simulating coseismic deformation of quartz in the middle crust and fabric evolution during postseismic stress relaxation — An experimental study

Non-steady state deformation and annealing experiments on vein quartz are designed to simulate earthquake-driven episodic deformation in the middle crust. Three types of experiments were carried out using a modified Griggs-type solid medium deformation apparatus. All three start with high stress deformation at a temperature of 400 °C and a constant strain rate of 10^− 4 s^− 1 (type A), some are followed by annealing in the stability field of α-quartz for 14–15 h at zero nominal differential stress and temperatures of 800–1000 °C (type A + B), or by annealing for 15 h at 900 °C and at a residual stress (type A + C).The quartz samples reveal a very high strength > 2 GPa at a few percent of permanent strain. The microstructures after short-term high stress deformation (type A) record localized brittle and plastic deformation. Statisc annealing (type A + B) results in recrystallisation restricted to the highly damaged zones. The new grains aligned in strings and without crystallographic preferred orientation, indicate nucleation and growth. Annealing at non-hydrostatic conditions (type A + C) results in shear zones that also develop from deformation bands or cracks that formed during the preceding high stress deformation. In this case, however, the recrystallised zone is several grain diameters wide, the grains are elongate, and a marked crystallographic preferred orientation indicates flow by dislocation creep with dynamic recrystallisation. Quartz microstructures identical to those produced in type A + B experiments are observed in cores recovered from Long Valley Exploratory Well in the Quaternary Long Valley Caldera, California, with considerable seismic activity.The experiments demonstrate the behaviour of quartz at coseismic loading (type A) and subsequent static annealing (type A + B) or creep at decaying stress (type A + C) in the middle crust. The experimentally produced microfabrics allow to identify similar processes and conditions in exhumed rocks.