An analysis of 3.5 kHz acoustic reflections and sediment physical properties

Near-bottom normal incidence acoustic reflection data and sediment physical property data are used to study the relationships between acoustic reflections and sediment physical properties. A pinger-hydrophone experiment was performed to obtain the necessary acoustic reflection data. In addition, a standard piston core was retrieved in the acoustic survey area for physical property analysis. The piston core was sampled and 13 properties were measured at 55 locations within the top 12 m of the core. Correlation studies amongst the sediment physical properties resulted in the following strong correlations: acoustic impedance ($\text{Z}$) and porosity ($\text{N}$), (0.96); water content ($\text{WC}$) and $\text{Z}$, (0.95); bulk density ($\text{BD}$) and $\text{Z}$, (0.99).The empirical orthonormal function (EOF) method was employed for acoustic signal analysis. This method assumes no a-priori models of the sediment or causality. The EOF method reduced the acoustic data to 8 functions that contained 97.6% of the sample variance. The EOFs were subsequently analysed by using cepstrum analysis which reveals time delay information and enhances detecting zones of reflectivity. The result of the sediment physical property and cepstrum analysis indicates that zones of reflectivity are essentially zones of relatively high acoustic impedance, low porosity, and low phi (high mean grain size).     

Studies of Plasma Dynamics in a Small Plasma Focus Operating in Hydrogen-Argon Mixtures

We report on experimental observations in PFP-I, a small 3.8 kJ plasma focus, which is operated in Hydrogen-Argon mixtures to investigate the effect of parameter modifications on the overall performance of the device. An extensive array of diagnostics is been used, which includes voltage and current probes in the external circuit, a novel small magnetic probes array located along the cathode rods, filtered PIN diodes located side and end on, and filtered multi-pinhole and slit-wire X-ray camera. Extended operating range from below 0.2 Torr upwards has been achieved. Hot spot formation has been investigated as a function of H₂-Ar mixing ratio. Hot spot sizes around 150 m in the soft X-ray region, have been inferred from the slit-wire measurements. Pin-hole time integrated X-ray pictures and time resolved PIN diode measurements have been used to determine characteristic hot-spot temperatures in the 350 to 450 eV range.     

Organohalogen contaminants and trace metals in North-East Atlantic porbeagle shark (Lamna nasus)

The North-East Atlantic porbeagle (Lamna nasus) population has declined dramatically over the last few decades and is currently classified as ‘Critically Endangered’. As long-lived, apex predators, they may be vulnerable to bioaccumulation of contaminants. In this study organohalogen compounds and trace elements were analysed in 12 specimens caught as incidental bycatch in commercial gillnet fisheries in the Celtic Sea in 2011. Levels of organohalogen contaminants were low or undetectable (summed CB and BDE concentrations 0.04–0.85 mg kg⁻¹ wet weight). A notably high Cd concentration (7.2 mg kg⁻¹ wet weight) was observed in one mature male, whereas the range observed in the other samples was much lower (0.04–0.26 mg kg⁻¹ wet weight). Hg and Pb concentrations were detected only in single animals, at 0.34 and 0.08 mg kg⁻¹ wet weight, respectively. These contaminant levels were low in comparison to other published studies for shark species.     

Temporal variability of selected dissolved elements in the lower Orinoco River,Venezuela

Monthly analyses of pH, conductance, alkalinity, total suspended solids, dissolved major cations (Na, K, Ca and Mg), and selected dissolved trace elements (Fe, Al, Mn, Cu, Zn and Cr) were conducted on waters of the lower Orinoco River from February 2004 to May 2006. The data show strong seasonal variability. Major cations had maximum concentrations at low water, and were correlated with pH, conductance and alkalinity because of the tributaries coming from the Andean zones, where the weathering of evaporites and carbonate shales controls water chemistry. K concentrations did not show any relation with evaporite weathering, probably because large amounts of K come from the Guayana Shield rivers as a consequence of feldspar weathering. The concentrations of dissolved Fe, Mn and Cu were highest during the high water stage. Concentrations of the elements K, Cr, Zn and Cu are correlated with each other but not with dissolved Fe and Al, which probably are complexed with humic and fulvic substances. Mn concentrations did not show relationships with other variables. Inter‐annual variability of dissolved elements is explained by temporal changes in precipitation. Copyright © 2008 John Wiley & Sons, Ltd.     

Variations in stratigraphic and reservoir properties adjacent to the Mid-Paleocene sequence boundary, Campo section, Pyrenees, Spain

The Paleocene of the Campo section, Spain has different sedimentological characteristics above and below the Mid-Paleocene Unconformity. Beneath the unconformity sediments are dominated by evaporitic carbonates and collapse breccias. Above it they are characterized by continental detrital beds alternating with paleosols. Different subaerial features are observed and correspond to different porosity values, pore–throat sizes and micrite morphologies. Unexposed or intertidal facies have low porosity, low throat–pore size (mesoporosity) and well preserved rhombic crystals. Intermediate exposed facies (paleosols) possess medium porosity, medium pore–throat size (microporosity) and mainly micro-rhombic crystals. Finally, the facies corresponding to high exposure intensity and to evaporitic original facies presents high porosity, permeability, large pore–throat size and rounded micritic crystals. These observations show that the emersion phase caused important dissolution, especially when associated with an easily dissolved original lithofacies.     

Yardangs in terrestrial ignimbrites: Synergistic remote and field observations on Earth with applications to Mars

The conditions of formation and the form of yardangs in ignimbrites in the Central Andes of Chile, Bolivia, and Argentina may be the most convincing terrestrial analog to the processes and lithology that produce the extensive yardangs of the Medusae Fossae Formation (MFF) of Mars. Through remote and field study of yardang morphologies in the Central Andes we highlight the role that variable material properties of the host lithology plays in their final form. Here, ignimbrites typically show two main facies: an indurated and jointed facies, and a weakly to poorly indurated, ash- and pumice-rich facies. Both facies are vertically arranged in large (erupted volume >100's of km³) ignimbrites resulting in a resistant capping layer, while smaller (10's of km³) ignimbrites are made predominantly of the weakly indurated facies. The two facies have quite different mechanical properties; the indurated facies behaves as strong rock, fails by block collapse and supports steep/vertical cliffs, while the non-indurated facies is more easily eroded and forms gentle slopes and manifests as more subdued erosional forms. In response to aeolian action, the presence of an upper indurated facies results in large, elongate, high aspect ratio (1:20-1:40) megayardangs that form tall (100 m), thin ridges with steep to vertical walls. These are built on a broad apron of the weakly indurated facies with abundant fallen blocks from the upper indurated facies. These terrestrial megayardangs appear to be analogous to megayardangs with associated block fields seen on Mars. Smaller-volume, weakly indurated ignimbrites are sculpted into smaller, stubbier forms with aspect ratios of 1:5-1:10 and heights rarely exceeding 10 m. Excavation of a windward basal moat suggests an erosional progression like that seen in incipient yardangs on Mars. Excavation rates of 0.007-0.003 cm/year are calculated for the weakly indurated ignimbrites. While a persistent strong unidirectional wind is the dominant parameter controlling yardang formation and orientation, a role for flow separation and vorticity is also suggested by our observations at both yardang types. While the indurated facies is commonly pervasively jointed, jointing is of secondary importance in controlling yardang orientation. Serrated margins, a common feature on Mars, result from oblique intersections of jointing with yardang flanks or scarps of ignimbrite. The processes of yardang formation we describe from ignimbrites from the Central Andes are not necessarily specific to ignimbrites, but do connote that degree and distribution of induration is a major control in yardang formation and this has implications for the lithology of the MFF on Mars.     

Extension of the solution of Kepler's equation to high eccentricities

The classic Lagrange's expansion of the solutionE(e, M) of Kepler's equation in powers of eccentricity is extended to highly eccentric orbits, 0.6627 ... <e<1. The solutionE(e, M) is developed in powers of (e–e*), wheree* is a fixed value of the eccentricity. The coefficients of the expansion are given in terms of the derivatives of the Bessel functionsJ _n (ne). The expansion is convergent for values of the eccentricity such that |e–e*|<(e*), where the radius of convergence (e*) is a positive real number, which is calculated numerically.