Implications of the fault scaling law for the growth of topography: mountain ranges in the broken foreland of north-east Tibet

A fault scaling law suggests that, over eight orders of magnitude, fault length L is linearly related to maximum displacement D. Individual faults may therefore retain a constant ratio of D/L as they grow. If erosion is minor compared with tectonic uplift, the length and along‐strike relief of young mountain ranges should thus reflect fault growth. Topographic profiles along the crests of mountain ranges in the actively deforming foreland of north‐east Tibet exhibit a characteristic shape with maximum height near their centre and decreasing elevation toward the tips. We interpret the along‐strike relief of these ranges to reflect the slip distribution on high‐angle reverse faults. A geometric model illustrates that the lateral propagation rate of such mountain ranges may be deciphered if their length‐to‐height ratio has remained constant. As an application of the model, we reconstruct the growth of the Heli Shan using a long‐term uplift rate of ～1.3 mm yr^?1 derived from ²¹Ne and ¹⁰Be exposure dating.     

A Nonextensive Entropy Approach to Kappa-Distributions

Most astrophysical plasmas are observed to have velocity distribution functions exhibiting non-Maxwellian suprathermal tails. The high energy particle populations are accurately represented by the family of kappa-distributions where the use of these distributions has been unjustly criticized because of a perceived lack of theoretical justification. We show that distributions very close to kappa-distributions are a consequence of the generalized entropy favored by non extensive statistics, which provides the missing link for power-law models of non-thermal features from fundamental physics. With regard to the physical basis supplied by the Tsallis nonextensive entropy formalism we propose that this slightly modified functional form, qualitatively similar to the traditional kappa-distribution, be used in fitting particle spectra in the future.     

A preferred orientation of extragalactic double radio sources

The distribution of the main axes of double radio sources is used to test isotropy of that part of the universe which is accessible to radio investigations. Data for 274 double and/or extended sources have been taken from the literature to compute the fit to several simple models of global orientation by means of a ²-test. The best fit has been found on a 3%-significance level for the preferred orientation along a right-handed helix with pitch angle 82° in the direction =95°, =–38° (165°,b=20°). This preferential alignment of radio sources is assumed to be caused by a largescale magnetic field.     

The sensitized photo-oxidation of n-pentadecane as a model for abiotic decomposition of aliphatic hydrocarbons in seawater

n-Pentadecane was photo-oxidized, as a surface film, on purified natural seawater under simulated environmental conditions with anthraquinone as sensitizer. Initial attack by hydrogen abstraction from carbon atoms within the chain is followed by reaction of the alkyl radicals thus generated with molecular oxygen. The stable reaction products identified by GC-MS strongly suggest that alkoxy radicals produced by cleavage of the peroxide bond are key intermediates in the decomposition of the original alkane. The alkoxy radicals stabilize themselves either as ketones by reaction with molecular oxygen which is transformed into HO₂ or, if μ-hydrogen atoms are available, by cyclic electron rearrangements similar to a Norrish type II photo-decomposition. The products of the electron rearrangements are 1-alkenes and daughter alkoxy radicals. The latter either yield methyl ketones and HO₂ radicals upon reaction with molecular oxygen or undergo further decomposition as long as γ-hydrogen atoms are available. The generation of acetone and HO₂ radicals, inferred by the proposed reaction mechanism as products of many such degradation sequences, offers a plausible explanation for their occurrence in seawater in addition to those already advanced.     

Temperature-dependent leaching of chemical elements from mineral water bottle materials

It is well established that minute amounts of chemical elements will leach from bottle materials (glass or PET – polyethylene terephthalate) to water stored in such bottles. This study investigated whether leaching increases with storage temperature. For glass bottles this is clearly the case for a long list of elements: Ag, Al, As, B, Ba, Ca, Co, Cr, Cs, Cu, Fe, Ga, Ge, K, La, Li, Mg, Mo, Na, Ni, Pb, Rb, Sb, Se, Sn, Sr, Ti, U, V, W and Zr. However, for glass bottles drinking water maximum admissible concentration values as defined by European authorities are not exceeded even after 1 week of leaching at 80 °C. The critical temperature limit where leaching substantially increases for many elements appears to be 45 °C. For PET bottles, Sb is the only element where leaching is observed at all temperatures and again leaching strongly increases at 45 °C. For PET bottles Sb concentrations observed in water after 1 week storage at 80 °C reach almost four times the maximum admissible concentration values for drinking water but do not exceed the relevant higher limit for food (including water) packaged in PET.     

Pronounced increase in slope instability linked to global warming: A case study from the eastern European Alps

In recent decades, slope instability in high-mountain regions has often been linked to increase in temperature and the associated permafrost degradation and/or the increase in frequency/intensity of rainstorm events. In this context we analyzed the spatiotemporal evolution and potential controlling mechanisms of small- to medium-sized mass movements in a high-elevation catchment of the Italian Alps (Sulden/Solda basin). We found that slope-failure events (mostly in the form of rockfalls) have increased since the 2000s, whereas the occurrence of debris flows has increased only since 2010. The current climate-warming trend registered in the study area apparently increases the elevation of rockfall-detachment areas by approximately 300 m, mostly controlled by the combined effects of frost-cracking and permafrost thawing. In contrast, the occurrence of debris flows does not exhibit such an altitudinal shift, as it is primarily driven by extreme precipitation events exceeding the 75th percentile of the intensity-duration rainfall distribution. Potential debris-flow events in this environment may additionally be influenced by the accumulation of unconsolidated debris over time, which is then released during extreme rainfall events. Overall, there is evidence that the upper Sulden/Solda basin (above ca. 2500 m above sea level [a.s.l.]), and especially the areas in the proximity of glaciers, have experienced a significant decrease in slope stability since the 2000s, and that an increase in rockfalls and debris flows during spring and summer can be inferred. Our study thus confirms that “forward-looking” hazard mapping should be undertaken in these increasingly frequented, high-elevation areas of the Alps, as environmental change has elevated the overall hazard level in these regions.     

Potential impact of climate change on ecosystems of the Barents Sea Region

The EU project BALANCE (Global Change Vulnerabilities in the Barents region: Linking Arctic Natural Resources, Climate Change and Economies) aims to assess vulnerability to climate change in the Barents Sea Region. As a prerequisite the potential impact of climate change on selected ecosystems of the study area has to be quantified, which is the subject of the present paper. A set of ecosystem models was run to generate baseline and future scenarios for 1990, 2020, 2050 and 2080. The models are based on data from the Regional Climate Model (REMO), driven by a GCM which in turn is forced by the IPCC-B2 scenario. The climate change is documented by means of the Köppen climate classification. Since the multitude of models requires the effect of climate change on individual terrestrial and marine systems to be integrated, the paper concentrates on a standardised visualisation of potential impacts by use of a Geographical Information System for the timeslices 2050 and 2080. The resulting maps show that both terrestrial and marine ecosystems of the Barents region will undergo significant changes until both 2050 and 2080.     

Arsenic distribution in the environment: The effects of scale

The distribution of As in a variety of sample materials was studied at different scales, from continental to local, combining published data sets with the aim of delineating the impact and relative importance of geogenic vs. anthropogenic As sources. Geochemical mapping of As with a variety of sample materials demonstrates that variation is high at all scales (local to continental) – from sample densities of 400 sites per km² to 1 site per 5000 km². Different processes govern the As distribution at different scales. A high sample density is needed to reliably detect mineralisation or contamination in soil samples. In both cases the impact on the much larger geochemical background variation is limited to a local scale. Distribution patterns in geochemical maps on the sub-continental to continental scale are dominated by natural variation. Given that the geochemical background is characterised by a high variation at all scales, it appears impossible to establish a reliable single value for “good soil quality” or a “natural background concentration” for As for any sizeable area, e.g., for Europe. For such a differentiation, geochemical maps at a variety of scales are needed.     

In situ identification of a CAI candidate in 81P/Wild 2 cometary dust by confocal high resolution synchrotron X-ray fluorescence

We detected additional CAI-like material in STARDUST mission samples of comet 81P/Wild 2. Two highly refractory cometary dust fragments were identified in the impact track 110 [C2012, 0, 110, 0, 0] by applying high resolution synchrotron induced confocal and conventional XRF analysis (HR SR-XRF). The use of a polycapillary lens in front of the detector for confocal spectroscopy dramatically improves the fidelity of particle measurements by removing contribution from the surrounding aerogel. The high spatial resolution (300 × 300 nm²; 300 × 1000 nm²) obtained allowed the detailed non-destructive in situ (trapped in aerogel) study of impacted grains at the sub-μm level.For the two largest particles of the track, the terminal particle and a second particle along the impact track, Ca concentration is up to 30 times higher than CI and Ti is enriched by a factor of 2 compared to CI. High resolution (HR) SR-XRF mapping also reveals that the highest concentrations of Ca, Ti, Fe (and Ni) measured within each grain belongs to different areas of the respective maps which indicate that the particles are composed of several chemically diverse mineral phases. This is in agreement with the finding of a complex phase assemblage of highly refractory minerals in the first ever detected Stardust mission CAI grain “Inti” of Track 25.Principle component analysis (PCA) is a powerful tool for extracting the dominant mineral components and was applied to the two grains indicating that regions in the terminal particle and the second particle are consistent with anorthite or grossite and gehlenite, monticellite or Dmitryivanovite (CaAl₂O₄), respectively.Our new findings demonstrate that the HR SR-XRF with confocal geometry and PCA analysis is capable of identifying CAI-like fragments without the need to extract particles from the aerogel matrix which is a time-consuming, complex and destructive process.Furthermore, the detection of new CAI-like fragments in the coma dust of comet 81P/Wild 2 strengthens the observation that strong mixing effects and, therefore, mass transport before or during comet formation must have occurred at least up to the region where Kuiper Belt comets formed (30 AU).