Planar and nonplanar ion acoustic shock waves with nonthermal electrons and positrons

The nonlinear propagation of ion acoustic shock waves (IASWs) are studied in an unmagnetized plasma consisting of nonthermal electrons, nonthermal positrons, and singly charged adiabatically hot positive ions, whose dynamics is governed by the two dimensional nonplanar Kadomstev-Petviashvili-Burgers (KPB) equation. The shock solution of the KPB equations is obtained numerically. The effects of several parameters and ion kinematic viscosities on the properties of ion acoustic shock waves are discussed in planar and nonplanar geometry. It is shown that the ion acoustic shock wave propagating in cylindrical/spherical geometry with transverse perturbation will be deformed as time goes on. Also, it is seen that the strength and the steepness of the IASWs increases with increasing β, the nonthermal parameter.     

Superthermal effect of electrons on nonplanar dust-ion-acoustic solitary waves and double layers in a dusty plasma

The basic features of planar and nonplanar time-dependent dust-ion-acoustic (DIA) solitary waves (SWs) and double layers (DLs) have been studied in an unmagnetized dusty plasma system consisting of positively and negatively charged dust, Boltzmann distributed ions and superthermal electrons (represented by kappa distribution). Using the reductive perturbation technique (RPT) we have derived modified Gardner (MG) equation, which gives information beyond the Korteweg-de Vries (KdV) limits (corresponding to the vanishing of nonlinear coefficient of the KdV equation). It is seen that the properties of nonplanar DIA SWs and DLs are significantly differs as the value of spectral index kappa (κ) changes. The present investigation may have relevance in the study of propagation of DIA waves in space and laboratory plasmas.     

Effect of meso‐structure on strength and size effect in concrete under tension

The effect of heterogeneity in meso level geometric and material properties on tensile strength and size effect in split cylinder specimens is investigated. Critical meso geometric parameters are identified by studying their influence on the evolution of the fracture process zone. A statistical analysis is used to account for dependencies between the parameters. A reversal of the size effect, important for the strength of field specimens, is observed for certain meso geometries. Meso level explanations for this are proposed, and meso geometries likely to show such a reversal are identified. For moderately sized specimens, major trends in the size effect are seen to be almost entirely explained by heterogeneity in the meso geometry.     

Quality Assessment of Atmospheric Motion Vectors Over the Indian Ocean

Because conventional observations over the oceans are not available, especially during tropical cyclones, multi-spectral atmospheric motion vectors (AMVs) estimated from geostationary satellites are routinely assimilated in the numerical weather prediction models at different operational centres across the globe. The derived AMVs are generally validated with radiosonde observations available over land at synoptic hours; however, over the ocean there is a limited scope to assess the quality of AMVs. Over ocean, AMVs can be validated with radiosonde data available from opportunistic ships or using dropsonde data available from aircrafts. In this study, the accuracy of the AMVs derived from the geostationary satellites Kalpana-1 and Meteosat-7 is evaluated over the oceanic region. Radiosonde data available from a ship cruise held in the Bay of Bengal during the period 09 July–08 August 2012 and from the Cal/Val site situated at Kavaratti Island (72.62°E, 10.57°N) in the southern Indian Ocean are used to assess the AMV accuracy. In this study, 83 radiosonde profiles are used to validate the Kalpana-1 AMVs, to allow a better understanding of AMV errors over the Indian Ocean. The RMSVD of Kalpana-1 AMVs for the high-, mid- and low-levels are found to be 7.9, 9.4 and 5.3 m s^?1, respectively, while the corresponding RMSVD for Meteosat-7 AMVs are 9.1, 5.5 and 3.7 m s^?1. A similar accuracy is observed when the AMVs are validated against the NCEP analyses collocated with the nearest radiosonde locations. The high RMSVD and bias for Kalpana-1 AMVs at the mid-level and Meteosat-7 AMVs at the high-level are associated with the limitation of satellite winds to resolve the upper-level easterly jet in conjunction with errors in the height assignment. This study could help the numerical modellers to assign appropriate observation error over this region during the assimilation of AMVs into the NWP models.     

A unified earthquake catalogue for South Asia covering the period 1900–2014

Seismicity analysis is very much pertinent for Indian subcontinent and its adjoining region which is seismically active including many great earthquakes associated with collision and subduction tectonics in the northern, north-eastern part of the subcontinent and in the Andaman and Nicobar Island. An earthquake catalogue has been generated for South Asia covering the period 1900–2014 by compiling the records of earthquake occurrences from International Seismological Center, Global Centroid Moment Tensor (GCMT), US Geological Survey, India Meteorological Department and published literature. The uniform magnitude scaling in moment magnitude M _W,GCMT is achieved through connecting relationships between different magnitude types. These relationships are derived by orthogonal standard regression analysis on available data pairs. The derived relationships have been compared with the existing equations already reported by others. The catalogue is subsequently subjected to a seismicity declustering algorithm to identify the foreshocks, main-shocks and aftershocks. The catalogue thus compiled is envisaged to be a useful resource for seismotectonic and seismic hazard studies in the region.

     

Modeling of Stone Column-Supported Embankment Under Axi-Symmetric Condition

In the present work, a simplified model has been developed to study the behavior of stone column-supported embankment under axi-symmetric loading condition. The rate of consolidation of stone column-reinforced soft ground under axi-symmetric condition has also been presented in the paper. Mechanical model elements such as Pasternak shear layer, spring–dashpot system are used to model the different components such as granular layer, soft soil, stone columns etc. The governing differential equations are solved by finite difference technique. Parametric study has also been carried out to show the effect of different model variables on the settlement, stress concentration ratio of the foundation system. It is observed that for lower diameter ratio, at a particular time, the degree of consolidation predicted by the present method for axi-symmetric loading condition is almost same or lower than the degree of consolidation obtained by unit cell approach, but as the diameter ratio increases present analysis predicts higher degree of consolidation as compared to the unit cell approach. The maximum settlement decreases as the modular ratio increases and beyond the modular ratio value 30, the reduction rate of settlement decreases.     

Breithauptite: A rare antimonide in the Dariba-Rajpura-Bethumni belt,Rajsamand district,Rajasthan

Breithauptite (NiSb), a rare antimonide, is generally found associated with hydrothermal vein ores of Ni and Co. In India, it has so far been recorded only from the gold-quartz veins of the Kolar Gold Field. Occurrence of this antimonide in a sediment-hosted milieu however, has seldom been noted. We report here the identification and characterization of this rare phase in both the stratiform and the vein-type ores of the sediment-hosted Zn-Pb sulphide deposits and prospects within the Dariba-Rajpura-Bethumni metallogenic belt in Northwestern India. Metamorphic remobilization from the stratiform ores of the belt has been postulated as a possible mechanism for the conspicuous segregation of breithauptite as a discrete phase within these ores.     

Estimating gross primary productivity of a tropical forest ecosystem over north-east India using LAI and meteorological variables

Tropical forests act as a major sink of atmospheric carbon dioxide, and store large amounts of carbon in biomass. India is a tropical country with regions of dense vegetation and high biodiversity. However due to the paucity of observations, the carbon sequestration potential of these forests could not be assessed in detail so far. To address this gap, several flux towers were erected over different ecosystems in India by Indian Institute of Tropical Meteorology as part of the MetFlux India project funded by MoES (Ministry of Earth Sciences, Government of India). A 50 m tall tower was set up over a semi-evergreen moist deciduous forest named Kaziranga National Park in north-eastern part of India which houses a significant stretch of local forest cover. Climatically this region is identified to be humid sub-tropical. Here we report first generation of the in situ meteorological observations and leaf area index (LAI) measurements from this site. LAI obtained from NASA’s Moderate Resolution Imaging Spectroradiometer (MODIS) is compared with the in situ measured LAI. We use these in situ measurements to calculate the total gross photosynthesis (or gross primary productivity, GPP) of the forest using a calibrated model. LAI and GPP show prominent seasonal variation. LAI ranges between 0.75 in winter to 3.25 in summer. Annual GPP is estimated to be \(2.11\,\hbox {kg C m}^{-2} \, \hbox {year}^{-1}\).     

Modeling of shear failure in fractured reservoirs with a porous matrix

A finite volume-based numerical modeling framework using a hierarchical fracture representation (HFR) has been developed to compute flow-induced shear failure. To accurately capture the mechanics near fracture manifolds, discontinuous basis functions are employed which ensure continuity of the displacement gradient across fractures. With these special basis functions, traction and compressive forces on the fracture segment can be calculated without any additional constraints, which is extremely useful for estimating the irreversible displacement along the fracture (slip) based on a constitutive friction law. The method is further extended to include slip-dependent hydraulic aperture change and grid convergent results are obtained. Further, the change in hydraulic aperture is modeled using an asymptotic representation which respects the experimentally observed behavior of pore volume dilation due to shear slip. The model allows the initial rapid increase in hydraulic aperture due to shear slip and asymptotically approaches a finite value after repeated shearing of a fracture segment. This aperture increase is the only feedback for mechanics into the fluid flow for a linear elastic mechanics problem. The same model is also extended to include poroelastic relations between flow and mechanics solver. The grid convergence result in the case of poroelastic flow-mechanics coupling for flow-induced shear failure is also obtained. This proves the robustness of the numerical and analytical modeling of fracture and friction in the extended finite volume method (XFVM) set-up. Finally, a grid convergent result for seismic moment magnitude for single fracture and fracture network with random initial hydraulic and friction properties is also obtained. The b-value, which represents the slope of seismic moment occurrence frequency decay vs seismic moment magnitude, which is approximately constant in a semi-logarithmic plot, is estimated. The numerical method leads to converged b-values for both single fracture and fracture network simulations, as grid and time resolutions are increased. For the resulting linear system, a sequential approach is used, that is, first, the flow and then the mechanics problems are solved. The new modeling framework is very useful to predict seismicity, permeability, and flow evolution in geological reservoirs. This is demonstrated with numerical simulations of enhancing a geothermal system.