Species selection and assessment of eco-engineering effects of seedlings for biogeomorphological landscape experiments

Landscape experiments of fluvial environments such as rivers and deltas are often conducted with live seedlings to investigate effects of biogeomorphological interactions on morphology and stratigraphy. However, such experiments have been limited to a single species, usually alfalfa (Medicago sativa), whereas important environments in nature have many different vegetation types and eco-engineering effects. Landscape experimentation would therefore benefit from a larger choice of tested plant species. For the purpose of experimental design our objective was to identify fast-germinating and fast-growing species and determine their sensitivity to flow conditions during and after settling, their maximum growth, hydraulic resistance and added bank strength. We tested germination time and seedling growth rate of 18 candidate species with readily available seeds that are fast growing and occur at waterlines, plus Medicago sativa as a control. We selected five species that germinate and develop within days and measured properties and eco-engineering effects depending on plant age and density, targeting typical experimental conditions of 0–0.3 m/s flow velocity and 0–30 mm water depth. Tested eco-engineering effects include bank strength and flow resistance. We found that Rumex hydrolapathum can represent riparian trees. The much smaller Veronica beccabunga and Lotus pedunculatus can represent grass and saltmarsh species as they grow in dense patches with high flow resistance but are readily erodible. Sorghum bicolor grows into tall, straight shoots, which add significantly to bank strength, but adds little flow resistance and may represent sparse hardwood trees. Medicago sativa also grows densely under water, suggesting a use for mangroves and perhaps peat. In stronger and deeper flows the application of all species changes accordingly. These species can now be used in a range of landscape experiments to investigate combined effects on living landscape patterns and possible facilitation between species. The testing and treatment methodology can be applied to new species and other laboratory conditions. © 2019 The Authors. Earth Surface Processes and Landforms Published by John Wiley & Sons Ltd. © 2019 The Authors Earth Surface Processes and Landforms Published by John Wiley & Sons Ltd © 2019 The Authors Earth Surface Processes and Landforms Published by John Wiley & Sons Ltd.     

Saharan Dust Transport and High-Latitude Glacial Climatic Variability: The Alboran Sea Record

Millennial to submillennial marine oscillations that are linked with the North Atlantic's Heinrich events and Dansgaard–Oeschger cycles have been reported recently from the Alboran Sea, revealing a close ocean-atmosphere coupling in the Mediterranean region. We present a high-resolution record of lithogenic fraction variability along IMAGES Core MD 95-2043 from the Alboran Sea that we use to infer fluctuations of fluvial and eolian inputs to the core site during periods of rapid climate change, between 28,000 and 48,000 cal yr B.P. Comparison with geochemical and pollen records from the same core enables end-member compositions to be determined and to document fluctuations of fluvial and eolian inputs on millennial and faster timescales. Our data document increases in northward Saharan dust transports during periods of strengthened atmospheric circulation in high northern latitudes. From this we derive two atmospheric scenarios which are linked with the intensity of meridional atmospheric pressure gradients in the North Atlantic region.     

Upstream perturbation and floodplain formation effects on chute-cutoff-dominated meandering river pattern and dynamics

A sustained dynamic inflow perturbation and bar–floodplain conversion are considered crucial to dynamic meandering. Past experiments, one-dimensional modelling and linear theory have demonstrated that the initiation and persistence of dynamic meandering require a periodic transverse motion of the inflow. However, it remains unknown whether the period of the inflow perturbation affects self-formed meander dynamics. Here, we numerically study the effect of the inflow perturbation period on the development and meander dynamics of a chute-cutoff-dominated river, which requires two-dimensional modelling with vegetation forming floodplain on bars. We extended the morphodynamic model Nays2D with growth and mortality rules of vegetation to allow for meandering. We tested the effect of a transversely migrating inflow boundary by varying the perturbation period between runs over an order of magnitude around typical modelled meander periods. Following the cutoff cascade after initial meander formation from a straight channel, all runs with sufficient vegetation show series of growing meanders terminated by chute cutoffs. This generates an intricate channel belt topography with point bar complexes truncated by chutes, oxbow lakes, and scroll-bar-related vegetation age patterns. The sinuosity, braiding index and meander period, which emerge from the inherent biomorphological feedback loops, are unrelated to the inflow perturbation period, although the spin-up to dynamic equilibrium takes a longer time and distance for weak and absent inflow perturbations. This explains why, in previous experimental studies, dynamic meandering was only accomplished with a sustained upstream perturbation in flumes that were short relative to the meander wavelength. Our modelling of self-formed meander patterns is evidence that scroll-bar-dominated and chute-cutoff-dominated meanders develop from downstream convecting instabilities. This insight extends to many more fluvial, estuarine and coastal systems in morphological models and experiments, which require sustained dynamic perturbations to form complex patterns and develop natural dynamics. © 2019 The Authors. Earth Surface Processes and Landforms Published by John Wiley & Sons Ltd.     

Theory and simulation of solar system plasmas

Foreword: Special Topic

Theory and simulation of solar system plasmas     

Gliding and overthrust nappe tectonics in the Barberton Greenstone Belt

Regional recumbent folds, inverted stratigraphy, nappes and olistostromes are described from the southern part of the 3.3–3.5 Ga Barberton Greenstone Belt. Overthrusting of thin rigid silicified slabs with minimum dimensions of 25 km² and up to 500 m in thickness, occurred over minimum distances of 86 km. More ductile and coherent units were overfolded up to at least 2 km during their emplacement. The glide planes on which these nappes travelled were zones of high fluid pressures related to hydrothermal fluid circulation patterns, driven by heat sources from igneous intrusions. The upwelling areas of the geothermal convection cells were sites of mud-pools and hydrothermal vents which may mark the trailing edges (pull aparts) of the overthrust units. Progressive silica and carbonate precipitation due to decreasing temperatures, within the zones of fluid migration distant from the areas of high heat flow, probably acted as built-in braking systems below the travelling slabs. Active sedimentation and metasomatism during this tectonism indicates a protracted history for the evolution of the greenstone belt. The recognition of nappe and overthrust tectonics in the Barberton Belt, processes which may have been commonplace in Archaean terrains, necessitates a re-evaluation of the stratigraphy of this belt.     

Crustal thickness, discontinuity depth, and upper mantle structure beneath southern Africa: constraints from body wave conversions

The technique of receiver function analysis is applied to the study of crustal and upper mantle structures beneath the Kaapvaal craton in southern Africa and its surroundings. Seismic data were recorded by the seismic array of 82 sites deployed from April 1997 to April 1999 across southern Africa, as well as a dense array of 32 sites near Kimberley, in operation from December 1998 to June 1999. Arrival times for phases converted at the Moho are used to determine crustal thickness. The Moho depth in the south–western section of the craton was found to vary between 37 and 40 km, except for one station that recorded a depth of 43 km (SA23). Farther north along the western block of the craton (into Botswana) the depth increases up to 43 km. The depth increases even further in the north–eastern section of the craton, where results vary from 40 to 52 km. Just north of the Kaapvaal craton, in the neighbouring Zimbabwe craton, the crustal thickness drops significantly. The results obtained there varied from 36 to 40 km. For the Kimberley area, using the dense array, the Moho depth was found to be 37.3 km. Arrivals of the Ps and Ppps phases were used to determine the Poisson’s ratio in the region. This was found to be 0.26±0.01. Arrivals of phases from the 410 and 660 km mantle discontinuities are used to interpret the relative positions of these discontinuities, as well as for comparison of mantle temperatures and seismic velocities in the region with global averages. In the Kimberley area the 410 and 660 km discontinuities were found at their expected depth, implying that mantle temperatures in the region are close to the global average. The seismic velocities above the ‘410’ were found up to 5% faster than the averages from the global iasp91 model, which is fast even by Precambrian standards. In other sections of the Kaapvaal craton, the velocities are also faster than global averages, but not as fast as beneath Kimberley. In these sections, the ‘410’ is also slightly elevated, while the ‘660’ is depressed, which implies a slightly lower mantle temperature relative to the global average. Beneath the Kaapvaal craton we find evidence suggesting the presence of a zone with a reduced wavespeed gradient at an upper bound of approximately 300 km, which may mark the lower chemical boundary of the craton.     

North American transect of stable hydrogen and oxygen isotopes in water beetles from a museum collection

Museum collections contain a wealth of insect remains originating from a wide geographic range, which can be used to investigate their utility as a proxy for environmental isotope ratios. Chitinous remains of insects such as beetles (Coleoptera) are chemically stable and their stable isotope composition is strongly related to that of environmental water in the period of cuticle formation. We present a dataset of chitin ??D and ??¹⁸O in two genera of water beetles from a museum collection containing 40 locations for Helophorus (water scavenging beetles) and 48 locations for Hydroporus (predaceous diving beetles) that were selected from latitudes 27?C82°N in North America. Only two genera were used to minimize inter-sample variation caused by species-specific differences in metabolic effects, feeding strategy, habitat, and life cycle. The isotopic composition of water beetle exoskeletons had a strong latitudinal trend (North?CSouth) from ?160 to +65??? for ??D and from 7 to 34??? for ??¹⁸O, paralleling gradients of isotopes in precipitation. Strong relationships were observed between isotopic composition of beetles and modelled July precipitation (0.71?<?R ²?<?0.82, p?<?0.001). The relationship between ??D and ??¹⁸O in the beetle samples had a systematic offset from the global meteoric water line, which was likely caused by metabolic effects during chitin formation. The offset between ??D values in beetles and in modelled precipitation was 33??? larger, on average, for Hydroporus compared with Helophorus, suggesting fractionation of hydrogen isotopes during passage through the food chain. This trophic level effect was not observed for stable oxygen isotopes. Furthermore, the observed deviations between isotopic composition of water beetles and modelled precipitation at collection sites were not constant and indicated local hydrological deviations from modelled precipitation. The largest deviations were observed for sites in the Southern US and the Arctic that are highly evaporative and at sites in the Rocky Mountains and Coastal Mountains that were fed by snow melt. Our results indicated that the isotopic composition of water beetles from a museum collection was systematically related to ??D and ??¹⁸O values of precipitation at the collection site.     

Source-rock maturation characteristics of symmetric and asymmetric grabens inferred from integrated analogue and numerical modeling: The southern Viking Graben (North Sea)

We present the results of an integrated analogue and numerical modeling study with a focus on structural, stratigraphic and thermal differences between symmetric and asymmetric grabens. These models enable fault interpretation and subsidence analyses in studies of active rifting and graben migration. We imported the surface topography and crustal thinning factors from the analogue models into tectono-stratigraphic forward models which allowed an assessment of the relative importance of sediment stacking in the generation of symmetric and asymmetric grabens. Effects on source-rock maturation zones were calculated through 1D-thermal modeling for different graben types. Combined analogue-numerical modeling appears to be a useful method to simulate natural examples, as shown in this study of the southern Viking Graben in the northern North Sea. This area was formed by Early Permian-Late Jurassic extension, with rifting most intense during the Late Jurassic. The thermal structure of the model, constrained by lithospheric and sedimentary parameters for this region, compares well with actual source-rock maturation data on the southern Viking Graben.     

Two-dimensional modelling of subduction zone anisotropy with application to southwestern Japan

We present a series of 2-D numerical models of viscous flow in the mantle wedge induced by a subducting lithospheric plate. We use a kinematically defined slab geometry approximating the subduction of the Philippine Sea plate beneath Eurasia. Through finite element modelling we explore the effects of different rheological and thermal constraints (e.g. a low-viscosity region in the wedge corner, power law versus Newtonian rheology, the inclusion of thermal buoyancy forces and a temperature-dependent viscosity law) on the velocity and finite strain field in the mantle wedge. From the numerical flow models we construct models of anisotropy in the wedge by calculating the evolution of the finite strain ellipse and combining its geometry with appropriate elastic constants for effective transversely isotropic mantle material. We then predict shear wave splitting for stations located above the model domain using expressions derived from anisotropic perturbation theory, and compare the predictions to ∼500 previously published shear wave splitting measurements from seventeen stations of the broad-band F-net array located in southwestern Japan. Although the use of different model parameters can have a substantial effect on the character of the finite strain field, the effect on the average predicted splitting parameters is small. However, the variations with backazimuth and ray parameter of individual splitting intensity measurements at a given station for different models are often different, and rigorous analysis of details in the splitting patterns allows us to discriminate among different rheological models for flow in the mantle wedge. The splitting observed in southwestern Japan agrees well with the predictions of trench-perpendicular flow in the mantle wedge along with B-type olivine fabric dominating in a region from the wedge corner to about 125 km from the trench.