Faceted garnets from sandstones of the Munising Formation (Cambrian), northern Michigan: petrographic evidence for their origin by intrastratal dissolution

Imbricate wedge marks (facets) on garnets in sandstones of the Cambrian Munising Formation of northern Michigan are associated with mouldic secondary porosity developed at the expense of garnet. Mouldic pores surrounding faceted garnets indicate that garnets in these sandstones have been affected by intrastratal dissolution (retreat of the mineral surface from its original boundaries) rather than by grain enlargement, which would be expected if garnet overgrowths had formed. The association of garnet facets with textural evidence of garnet dissolution proves that garnet facets form by intrastratal dissolution. These results confirm similar findings in other recent studies, and extend the geographic and stratigraphic range of proven occurrences of facet formation by intrastratal dissolution.     

Crystal Accumulation and Magma Mixing in the Petrogenesis of Tholeiitic Andesites from Fukujin Seamount, Northern Mariana Island Arc

Fukujin Seamount is a large, active, submarine volcano on thevolcanic front in the northernseamount province (NSP) of theMariana island arc (MIA). Five dredge hauls from the summitand upper flanks of Fukujin recovered mainly highly porphyriticbasaltic andesites. A few nearly aphyric samples are medium-Ksiliceous andesites (SiO₂ = 62%, K₂O = 1•5%). Fukujin andmost other large arc-front volcanoes of the northern MIA havetholeiitic (iron-enrichment) fractionation trends. This contrastswith the calc-alkaline trends of many smaller seamounts. A negativecorrelation of modal plagioclase content with bulk-rock SiO₂,as well as bulk-rock major and trace element variation trends,and glass analyses, suggests that lavas with >30 vol.% phenocrystsand <55 wt.% SiO₂ are partial cumulates. The presence ofbimodal phenocryst populations along with reversed to normalzoning of phenocrysts is explained by magma mixing of andesiticand basaltic liquids. Hybrid basaltic andesites probably formedby the accumulation of plagioclase in a tholeiitic magma chamberundergoing replenishment and mixing at a shallow crustal level.A petrogenetic model is presented for the origin of basalticandesite by combined magma mixing and fractional crystallization.Aphyric siliceous andesites can be modelled by simple fractionationof basaltic andesite. The early fractionating assemblage consistedmainly of plagioclase and clinopyroxene, with lesser olivineand minor magnetite, but plagioclase remained suspended in themelt. The later fractionating assemblage was dominated by plagioclasewith orthopyroxene instead of olivine. ^*Present address: 2260 rue Panet, Montreal, Quebec, H2L 3A6, Canada.     

Magmatism in the Gregory Rift, East Africa: Evidence for Melt Generation by a Plume

The volume and composition of volcanic rocks associated withthe Gregory rift are interpreted in the light of inversionsperformed on the REE concentrations of the most magnesian basalts.When the estimated volume of salic rock ({small tilde}88 000km³) is converted into basalt ({small tilde}792 000 km³) thetotal volume of basaltic melt generated over the last 30 Myis at least 924 000 km³, corresponding to an average rate ofmelt production of {small tilde}0•03 km³/yr and an averagemelt thickness of between 7 and 26 km everywhere beneath therift. The mean compositions of the basaltic magmas erupted withinthe rift and on the rift flanks during the Upper Oligocene andMiocene, the Pliocene, and the Quaternary are taken to be representativeof the average compositions of melts produced by fractionalmelting in the asthenospheric mantle. When the REE concentrationsof the observed average compositions are inverted they suggestthat much of the melt was produced in the depth and temperaturerange of the transition from garnet to spinel peridotite. Fora mantle potential temperature of {small tilde}1500C the topof the melting region predicted from the inversions is at {smalltilde}70 km beneath the rift axis and {small tilde}80 km beneaththe rift flanks. Within the rift zone the predicted thicknessof melt increases from the Upper Oligocene and Miocene to thePliocene and is always greater than that predicted for the riftflanks, and the timeaveraged thickness of melt predicted is0/5 km. To generate the observed volume of melt the asthenosphericmantle must continually upwell through the melting region (extendingfrom 70 to 150 km) with a vertical velocity of between 40 and140 mm/yr. The results suggest that, volumetrically and compositionally,magmatic activity associated with the Gregory rift is quantitativelyconsistent with a model of a mantle plume upwelling beneaththinned continental lithosphere. Predictions made by such amodel are in broad agreement with geophysical observations. ^* Present address/reprint requests to: B.P. Exploration, 4/5 Long Walk, Stockley Park, Uxbridge UB11 1BP, UK     

The origin and significance of groundwater-seepage gypsum from Bristol Dry Lake, California, USA

Gypsum and anhydrite fabrics observed in trenches and deep (500 m) cores from Bristol Dry Lake, California, USA, exhibit a vertical alignment of crystals similar to the fabric seen in bottom-nucleated brine pond gypsum. However, geochemical and sedimentological evidence indicate that the gypsum formed in Bristol Dry Lake precipitated displacively within the sediment where groundwater saturated with respect to gypsum recharges around the playa margin (groundwater-seepage gypsum). Evidence for displacive growth of gypsum is: (i) the geometry of the deposit, (ii) stable isotopic data and the water chemistry of the brine, and (iii) inclusions of matrix which follow twin planes and completely surround crystals as they grow. The bulk of the gypsum precipitated in the playa occurs around the edges of the playa in the playamargin facies and completely rings the lake. Sulphate concentrations in the groundwater increase toward the gypsum zone in the playa margin. Basinward of this zone, sulphate concentrations decrease sharply to trace element levels in the basin centre brine. Authigenic gypsum is rare in the centre of the playa. Stable (δ¹⁸O values measured for gypsum waters of crystallization (GWC) are similar to the values calculated for groundwater in the playa margin and alluvial fan sediments (?– 6%0), whereas measured brine δ¹⁸O values range from + 0·5 to + 3·7%0. Deuterium values measured for groundwater are ?– 70%0, GWC are ?– 60 to – 65%0 and brine values are ?– 57%0. The geometry of the deposit and the chemical data suggest that the water precipitating the gypsum is more closely associated with the groundwater than the brine. However, some mixing between groundwater and brine is likely. Within 100 m of the surface, the gypsum dehydrates to anhydrite, although the same vertically aligned fabric is retained through the diagenetic process. The similarity of displacive vertically aligned gypsum and anhydrite fabrics seen in Bristol Dry Lake to subaqueously deposited gypsum in modern brine ponds indicates that the criteria used to define subaqueous fabrics must be better constrained.     

The anatomy of an early Dinantian terraced floodplain: palaeo-environment and early diagenesis

The lowermost Carboniferous rocks in the Cockburnspath area of east Berwickshire (southern Scotland) are interpreted as coastal floodplain sediments. A lower mudstone-dominated unit is composed of silty mudstones and shales with subordinate sandstones and argillaceous ferroan dolomites (cementstones). These are interpreted as distal floodplain sediments with periodic crevasse-splay deposition. The dark grey colour of the mudrocks suggests deposition in reducing conditions, probably in floodplain lakes. Most of the cementstones are concretionary, some with septarian cracks, suggesting an early diagenetic origin. An immature palaeosol suggests periodic pedogenesis under improved drainage. A synsedimentary erosion surface indicates incision of a valley into the floodplain, presumably in response to base-level lowering. An upper sandstone-dominated unit starts with fine-grained rippled sandstones, cut by small channel sandstones. These are interpreted as floodplain lake deposits fed by crevasse channels. A distinctive conglomerate with cementstone clasts, wood fragments and fish remains is interpreted as a major overbank deposit, dumped into a pre-existing floodplain lake. A bivalve fauna was established in the overlying mudstones, followed by a thin limestone with a restricted marine fossil assemblage, showing that seawater flooding of the lakes occurred at times. Mudrocks throughout the sequence contain no pyrite, except for the marine band which has an organic-carbon/sulphur ratio and degree of pyritization value typical of marine sediments. The concretionary cementstones have δ¹³C values around —4 to —6%^0/00 PDB which are interpreted as indicative of anaerobic oxidation of organic matter. The combined geochemical data suggest a significant involvement of iron reduction in cementstone formation, although the δ¹³C values are ambiguous in assessing the relative involvement of methanogenesis and methane oxidation. Limited seawater inundation of the floodplains might have supplied magnesium and calcium ions for dolomite formation assuming that any H₂S derived as a result of sulphate reduction was oxidized by iron reduction. Alternatively a weathering source for solutes might have been involved.     

Sea level control of stacked late Quaternary coastal sequences, central Great Barrier Reef

Lithofacies analysis, pollen assemblages and radiocarbon age dates of 20 stratigraphic drill holes are used to develop an evolutionary history for late Quaternary sedimentation in two coastal embayments landward of the central Great Barrier Reef. Different physiographic settings of the embayments result in two contrasting styles of sedimentary sequence: (a) an exposed, moderate energy, beach barrier-lagoon system (Wyvuri Embayment) and (b) a protected, low energy, muddy inlet fill sequence (Mutchero Inlet). Despite sharp contrast in sequence style, similar depositional cycles occur in both embayments in response to late Quaternary sea level fluctuations including: (1) a last interglacial highstand (+2 m; c. 125 000 yr bp ) beach barrier (Wyvuri); (2) an early to mid-Holocene (8000–6100 yr bp ) transgressive beach barrier-lagoon (Wyvuri) and estuarine infill (Mutchero); and (3) mid-Holocene to present highstand beach barrier (Wyvuri) and estuarine (Mutchero) progradation. Preservation of such cycles in the stratigraphic record would produce a series of vertically stacked and offset linear barrier sands surrounded by lagoonal mud and fine grained shoreface sediment juxtaposed to muddy, estuarine infills. Sea level elevations are well recorded by the upward transition from Rhizophora-dominated intertidal mangrove mud to freshwater swamp (clearly identified by pollen analysis) and by the basal contacts of beach barrier sediments which sharply overlie the upper shoreface. Transgressive sedimentation is interrupted in both embayments by a constructional beach barrier (Wyvuri) and abbreviated progradation (Mutchero) corresponding to a — 5 m pause in relative sea level rise at c. 6800 yr bp . Sea level control of fine scale coastal sedimentation patterns is beginning to be widely recognized and provides an accurate analogue for stacked ancient sequences.     

The Effects of Fe3? and Mn3? on Aluminum Silicate Phase Relations in North-Central New Mexico, U.S.A.

Aluminum silicate triple-point occurrences are common in metamorphicrocks of northern New Mexico. The three polymorphs show extensivesolid solution, with Fe and Mn substituting for Al. Mineraltextures, the spatial distribution of phases, and the systematicpartitioning of Fe and Mn indicate that the kyanite-andalusite-sillimaniteassemblages crystallized in equilibrium. The compositions ofminerals in the three-phase assemblage vary across the studyarea, recording regional variations in the pressures and temperaturesof metamorphism. The highest-pressure rocks, exposed at RioMora, contain kyanite at higher elevations and sillimanite atlower elevations. A sub-horizontal isograd separates the twominerals. Kyanite and sillimanite have nearly identical Fe contentwhich varies systematically with X_Fe2O3 in hematite or ilmenite.Andalusite occurs only along a single manganiferous layer, incrystals rich in MnAlSiO₅ and saturated in FeAlSiO₅. Triple-pointassemblages can be found wherever the folded manganiferous layercrosses the unfolded kyanite-sillimanite isograd. The TruchasRange, preserving slightly lower pressures of metamorphism,shows kyanite-andalusite-sillimanite in rocks with titaniferoushematite. Andalusite is enriched in Fe relative to kyanite andsillimanite, but no polymorphs contain Mn. Rocks with lowerX_Fe2O3 in hematite have kyanite and sillimanite without andalusite,whereas rocks with pure hematite contain only andalusite. Theshallowest erosional levels are preserved in the western PicurisRange where the three polymorphs occur as pure minerals in ilmenite-bearingrocks. Hematitic samples contain only andalusite which showsextensive solid solution of both Fe and Mn. The assemblage kyanite-andalusite-sillimanite is not invariant.Iron and manganese both add degrees of freedom. These transitionmetals have stabilized the three-phase assemblage, in apparentchemical equilibrium, across a P-T interval of 500-540 ?C, 3?8-4?6kb in rocks from New Mexico. The saturation level of FeAlSiO5in andalusite does not vary with Mn content but does vary withpressure and temperature. Calculations indicate that a 2-3 kbdecrease in pressure or a 25-50 ?C increase in temperature resultsin a 1 mole per cent increase in X_FeAlSiO5 in iron-saturatedandalusite.     

Bedload stresses and sediment transport theory—a correction

A previous proposal (Leeder, 1977) to test the magnitude of the solid-transmitted stresses due to bedload transport failed to confirm Bagnold's theory because the applied fluid stress contribution was not corrected for sidewall drag. Once this correction is made there is a reasonable correspondence of theory and experiment.     

Indian Ocean tsunamis: environmental and socio-economic impacts in Langkawi, Malaysia

We report the results of a study of the physical characteristics and socio-economic impacts of the Indian Ocean Tsunami of 26 December 2004 on the tourist island of Langkawi, Malaysia. In comparison with many other locations struck by the tsunami, the immediate physical and socio-economic impacts in Langkawi were relatively minor. A detailed survey of the watermark and ground elevations was undertaken in the worst affected area between Sungei Kuala Teriang and Sungei Kuala Melaka. Here, the tsunami reached a maximum elevation of 4.29 m as it crossed the coast, with a maximum flow depth of 2.0 m and a very consistent run-up elevation relative to mean sea level of 300 ± 10 cm. The tsunami inundated inshore areas for 300 m and penetrated inland along creeks for 500–1000 m. Structural damage to buildings was confined to within 50–150 m of the shoreline where about 10% of the houses were completely destroyed and 60–70% suffered significant structural damage. Damage was particularly severe in areas where there was no engineered coastal protection, but while coastal revetments did provide enhanced protection for houses at the waterfront, the coastline in the study area appeared to be more heavily impacted than elsewhere in Langkawi because wave energy was focused on the area by offshore breakwaters built to protect the Langkawi port and airport. Emergency response after the tsunami was rapid and efficient but would have been improved if the local police station had not been rendered inoperative by the first wave, and if a mechanism had been in place to ensure that informal advance warnings transmitted between Phuket (Thailand), Langkawi and Penang (Malaysia) by tourist operators could have been more widely disseminated.     

Phase Equilibrium Constraints on Intensive Crystallization Parameters of the Ilimaussaq Complex, South Greenland

The 1·13 Ga Ilímaussaq intrusive complex, SouthGreenland, is composed of various types of alkali granite andsilica-undersaturated alkaline to agpaitic nepheline syenitesrelated to three subsequently intruded magma batches. Mineralchemistry indicates continuous fractionation trends within eachrock type, but with distinct differences among them. The last,peralkaline magma batch is the most fractionated in terms ofX_Fe^{mafic mineral}, feldspar composition and mineral assemblage.This indicates that an evolving magma chamber at depth discontinuouslyreleased more highly fractionated alkaline melts. Fluid inclusionsin some sodalites record a pressure drop from 3·5 to1 kbar indicating that crystallization started during magmaascent and continued in the high-level magma chamber. On thebasis of phase equilibria and preliminary fluid inclusion data,crystallization temperature drops from >1000°C (augitesyenite liquidus) to <500°C (lujavrite solidus) and silicaactivity decreases from