珠江河口西南风强迫下潮流场的数值模拟

采用Backhaus三维斜压模型模拟了均匀西南风场对珠江口近岸海域的影响，并与无风情况作了对比；通过对珠江河口盐度场及风生环流的分析比较，结果表明，模型较为真实地再现了夏季珠江河口的水动力学特性。     

埕岛油田数据基础重组及开发应用

从数据管理及后期应用的角度提出了数据平台的要领，讨论了该数据平台的物理结构、逻辑结构，在分类与组织的基础上给出了相应的数据字典。同时，还基于该平台探讨了测井曲线库及图形库的建设方法，并实现了具体功能。     

海洋平台结构形状与拓扑优化设计

以实际环境荷载作用下的实际海洋导管架平台结构为对象，研究了海洋平台结构在风，流，海冰等多荷载模式和多荷载工况下的优化设计的理论方法和应用技术，建立了结构尺寸优化，形状优化和拓扑优化问题的统一模型。计算结果反映出形状优化比尺寸优化所得设计更优，而拓扑优化的设计效果最好。不同的荷载工况对应的最优拓扑形式不同，因此在实际设计中应考虑实际的荷载工况，选取不同的拓扑形式。     

An Application of Direct Ritz Method for Random Seismic Responses of Jacket Platforms

1 .IntroductionNowadays tremendous efforts have been devotedtothe analysis of randomseismic responses .Forexample ,American PetroleumInstitute (API) has declared that the analysis of randomseismic re-sponsesis a useful tool for safety inspection. Owing to the complexity of platformand randomness ofload,it is difficult to carry out the randomresponse analysis of a jacket platform. The conventionalrandomvibration methods ,such as square root of the sumof squares (SRSS) and complete quadratic…     

长竹蛏人工育苗技术的初步研究

本文对长竹蛏繁殖习性、胚胎发育和人工育苗技术关键进行研究．结果表明亲贝经暂养可促进性成熟；幼虫对温、盐度的适应较广；变态附着采用缩光培育,未经缩光的附着时间延长,存活率降低;幼虫长至约240μm变态附着,附着量在(0.6～10)×106个/m     

温度对金红色大鳞副泥鳅(Paramisgurnus dabryanus)孵化、仔鱼活力和性别分化的影响

以大鳞副泥鳅(Paramisgurnus dabryanus)新品系“赣红1号”为对象,探究了不同温度(20,23,26,29,32℃)对其受精卵孵化、仔鱼活力和性别分化的影响。结果显示,当温度在20~32℃范围内时,培育周期和孵化周期与温度均呈负相关关系,均随着温度的升高而缩短。培育周期在各温度组间差异显著(P<0.05),孵化周期在29和32℃组间差异不显著,其余各组间均具有显著差异(P<0.05)。随着温度的升高,孵化率先升高后降低,26℃时孵化率达到最高;畸形率呈现与孵化率相反的趋势,26℃时畸形率最低,且显著低于20、29和32℃组(P<0.05);仔鱼的不投饵存活系数(SAI)随着温度的升高而逐渐降低,各组间差异显著(P<0.05),23℃时SAI值为59.77,最大可存活时间为15日龄;此外,雄性率随温度的升高而增加,高温可促进个体趋向雄性发育。研究发现“赣红1号”受精卵孵化、仔鱼活力和性别分化均受到温度的重要影响,结合生产实际和试验数据,其孵化和仔鱼培育的适宜温度应保持在23~26℃。     

In-Situ Observation of Fluid Mud in the North Passage of Yangtze Estuary, China

Observations of fluid mud were made in the lower North Passage of the Yangtze Estuary in February 2000, on 10 -11 August 2000, on 30 - 31 August 2000 (after two strong typhoons), on 21 - 24 August 2000 (neap tide) and on 3 -6 September 2000 (mean tide) respectively. In situ data show that the fluid mud in this area consists of fine cohesive sediment (median size 7.23 μm). The formation and movement of fluid mud varied during the neap-spring and flood-ebb tidal cycle. Observations suggest that fluid mud phenomena in this area may be categorised in a three-fold manner as slack water, storm and saltwedge features. The thickness of the fluid mud layer of slack water during the neap tide ranged from 0.2 to 0.96 m, whereas during the mean tide, the thickness ranged from 0.17 to 0.73 m, and the thickness of the fluid mud layer was larger during slack water than at the flood peak. Shoals cover an area of 800 km^2 with a water depth smaller than 5 m. Erosion of these extensive intertidal mudflats due to storm action provides an abundant sediment source. This is particularly significant in this estuary when the tidal level is lower than 5 m. The lower North Passage is a typical zone of saltwater wedging, so the saltwedge fluid mud has the most extensive spatial range in the estuary.     

日本对虾仔虾呼吸和排泄的初步研究

本文采用水瓶法和径流装置研究了不同温度下摄食和饥饿的日本对虾（Penaeus japonicus)仔虾（P）的呼吸与排泄。结果表明，日本对虾仔虾体长与干体重呈指数函数关系，DW＝0．006e^0.515L(r^2=0.999,n=16)；耗氧和氨排泄率随着温度的升高而提高、随着仔虾体重的增长反而变小；耗氧和氨排泄率与体重呈幂函数关系，30和26℃下耗氧率（R）与体重的关系方程式分别是R＝2.669DW^-1.041(r^2=0.953,n=8)和R=2.370DW^-0.708,(r^2=0.533,n=8)，30和26℃下氨排泄率（E）与体重的关系方程式分别是E＝36.81DW^-0.615(r^2=0.654,n=8) 和E＝15．28DW^-0.795(r^2=0.652,n=8）；饱食仔虾的耗氧率明显高于饥饿的仔虾，因摄食使仔虾（P15）额外消耗的能量为4％－20％，仔虾的特殊动力作用（SDA）大约在摄食5－7h后发生，并可持续作用10h左右。     

3D gravity modelling for Anyongbok Seamount in the East Sea

A seamount chain with an approximately WNW trend is observed in the northeastern Ulleung Basin. It has been argued that these seamounts, including two islands called Ulleung and Dok islands, were formed by a hotspot process or by ridge related volcanism. Many geological and geophysical studies have been done for all the seamounts and islands in the chain except Anyongbok Seamount, which is close to the proposed spreading ridge. We first report morphological characteristics, sediment distribution patterns, and the crustal thickness of Anyongbok Seamount using multibeam bathymetry data, seismic reflection profiles, and 3D gravity modeling. The morphology of Anyongbok Seamount shows a cone shaped feature and is characterized by the development of many flank cones and flank rift zones. The estimated surface volume is about 60 km³, and implies that the seamount is smaller than the other seamounts in the chain. No sediments have been observed on the seamount except the lower slope, which is covered by more than 1,000 m of strata. The crustal structure obtained from a 3D gravity modeling (GFR = 3.11, SD 3.82 = mGal) suggests that the seamount was formed around the boundary of the Ulleung Plateau and the Ulleung Basin, and the estimated crustal thickness is about 20 km, which is a little thicker than other nearby seamounts distributed along the northeastern boundary of the Ulleung Basin. This significant crustal thickness also implies that Anyongbok Seamount might not be related to ridge volcanism.     

台湾海峡毛颚动物分布的初步研究

本文分析了台湾海峡毛颚动物的种类组成、数量分布特征，并就其与环境因素的关系进行了初步探讨．结果显示与台湾海峡西部、东海等邻近海域相比，本区毛颚动物具种数少，数量小，季节变化幅度较小等特点．它的数量分布状况与闽斯沿岸流、南海西南季风漂流以及黑潮支流在本区运动消长有关。